Fisher & Paykel DCS CPV2-488 Installation Instructions Manual page 7

* *
C
C
H
ISO
CLEARANCE DIMENSIONS
Minimum width of ventilation hood installed above cooktop
A
Minimum vertical distance between countertop and cabinet extending above counter
B
Minimum clearance from left and right edge of cooktop to nearest vertical combustible surface
C
Minimum clearance from cooking surface to:
D
- combustible surface centered above the cooking surface
- combustible covering for ventilation hood centered above the cooking surface
- non-combustible surface centered above the cooking surface*
Maximum overall depth of overhead cabinetry
E
Width of cabinetry opening
F
Minimum clearance from from rear edge of cooktop to:
G
- nearest combustible surface
- nearest non-combustible surface*
Maximum depth from wall to cabinetry face:
H
- projecting control panel
- flush control panel
* Non-combustible surfaces: as defined in 'National Fuel Gas Code' (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by UL.
Clearances of less than 6" (152mm) must be approved by the local codes and/or by the local authority having jurisdiction.
** The cooktop must be supported from the bottom. Provide a platform or some other means of support to set the cooktop on. If the platform is solid, provide a 6" x 12" (152 x 305mm) cutout in the left rear corner for the gas inlet and power cord clearance.
6 CLEARANCE DIMENSIONS - ALL MODELS
E
E
G
G
H
A
A
D
D
B
COOKING SURFACE
COOKING SURFACE
* *
F
F
FRONT
30" MODELS 36" MODELS
inches (mm) inches (mm)
30'' (762)
18" (457)
12" (305)
54" (1372) 54" (1372)
36" (914)
30'' (762) 30'' (762)
13" (330)
30'' (762)
6" (152)
0" (0)
24 3/16'' (614) 24 3/16'' (614)
26 5/8" (677) 26 5/8" (677)
B
48" MODELS
inches (mm)
36'' (914) 48'' (1219)
18" (457) 18" (457)
12" (305) 12" (305)
54" (1372)
36" (914) 36" (914)
30'' (762)
13" (330) 13" (330)
36'' (914) 48'' (1219)
6" (152) 6" (152)
0" (0) 0" (0)
24 3/16'' (614)
26 5/8" (677)
7