Page 1
Installation instructions Please read and follow the ‘Safety and warnings’ and ‘installation instructions’ sections carefully before using your cooktop! Cooktop and cutout dimensions Property CE604DT CE704DT CE754DT Overall width of cooktop (mm) Overall depth of cooktop (mm) Height of chassis (below top of bench)(mm) https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Electric/Four_Burners/CE754DTB1/User_Guide_CE754DTB1/02_Inst…...
Page 2
Property CE604DT CE704DT CE754DT Height of terminal block (below top of bench)(mm) Width of chassis (mm) Depth of chassis (mm) Overall width of cutout (mm) Overall depth of cutout (mm) Clearances Property CE604DT CE704DT CE754DT Minimum clearance from rear edge of cutout to nearest combustible surface (mm).
Page 3
Property CE604DT CE704DT CE754DT Minimum clearance from benchtop to overhead cabinet not directly above the cooktop (mm). Minimum clearance below top of benchtop to thermal protection barrier (mm). Before you install the cooktop, make sure that • the benchtop is square and level, and no structural members interfere with space requirements the benchtop is made of a heat-resistant material •...
• removable • heat-resistant • made from low thermal conductivity material • at least 20 mm below the base of the cooktop to ensure adequate ventilation Fastening the cooktop to the bench 1. Turn the cooktop upside down and place it on a soft surface. 2.
Connecting the cooktop to the mains power supply • This cooktop must be connected to the mains power supply only by a suitably qualified person. • This cooktop must be earthed. • Before connecting the cooktop to the mains power supply, check that: 1.