Real Spirit Aqua-Ionizer Pro Deluxe 7.0 Owner's Manual page 17

www.AquaIonizerPro.com/pages/install
b) Threaded Inside Faucet: Being sure to first insert the washer, screw
the dual-thread faucet connector into the faucet. Then screw the
faucet diverter Valve onto the Dual read Connector.
c) Unthreaded Faucet: If your faucet has neither inside nor outside
threads, loosen the bolts on the 3-bolt faucet connector, slip it over
the end of the faucet pressing upward firmly then tighten bolts
securely locking it on to faucet. Next, screw the inner faucet thread
Joint securely into the bottom of the 3-bolt faucet connector. The
screw the faucet diverter Valve onto inner thread joint which you've
just attached to the 3-bolt faucet connector .
In some instance, either because the threads are
damaged, too wide, or too narrow, you may need to
use the 3-bolt faucet connector assembly method
even on threaded inside or outside faucets.
24mm
Faucet Connector
22mm
IMPORTANT
NEED HELP CALL 1-888-601-5886
Dual-Thread
3-Bolt Faucet
Connector
Faucet Diverter
Valve
Inner Thread
Faucet Joint
Faucet Diverter
Valve
15