Table of Contents
Advertisement
Manual Cleaning & Descaling:
Descaling removes these mineral deposits ("scales") which inhibit the
electrolysis process, from the surface of the electroplates. If your local
source water is particularly high in mineral deposits and/or if routine pH
testing reveals an increasingly wide variance from the preset values over
time, you should descale your water ionizer.
For More Information On Descaling
We have Multiple Descaling Options Available
A. Switch off the Faucet Diverter Valve so water is NOT flowing into the water
ionizer. Wait at least 20 seconds for the unit to return to standby mode
after completing any automatic cleaning processes and then unplug water
ionizer from the electrical outlet, remove it from it's wall mount and place
upright on the sink counter.
B. Unscrew the Inner Filter Cover. Then, Remove the Carbon
Water Filter from the Filter Chamber and set filter cover aside.
C.
Remove both the inlet water and acidic water outlet hoses from the
diverter valve. Now insert both caps onto the hoses. See Below. If
you've misplaced your "Caps", you can use a paper clip, small clamp,
wrapped rubber band, etc, to temporarily block just the Acidic Water
Outlet hose.
Re-Install Caps
28
Call 1-888-601-5886
IMPORTANT
NEED HELP CALL 1-888-601-5886
OUT
IN
Advertisement
Table of Contents
