Page 2
1. Only begin these instructions after installing 2. Remove the two smaller blue clips, closest the ionizer under the sink to rubber plugs one on each side 3. Remove rubber plugs by depressing 4. Locate the green hose coming down from your faucet and remove it from ionizer collet fittings to release 5.
Page 3
7. Reattach blue locking clips between collet 8. Turn on the water to the ionizer and check and elbow fittings where we installled hoses fitting for leaks into the filtration and ionizer. 9. Run water for 2 minutes to flush out the filtration.