Attach Metal Spout; Connect The Inlet Water Hose To The Faucet Diverter Valve - Real Spirit Aqua-Ionizer Pro Deluxe 7.0 Owner's Manual

Installation Step 4
REMOVE THE PLASTIC
Screw the flexible Metal Spout clockwise into the outlet connector on top of
the water ionizer.
If you a leak unscrew until leak stops. If it persists call 1-888-601-5886
Installation Step 5
Connect the Inlet Water Hose to the Faucet
Diverter Valve:
Connect the Inlet Water Hose to the top faucet diverter valve
and the Acidic Water Outlet Hose into the bottom valve.
Acidic Water Outlet Tube
CAUTION: Be sure that the Metal Spout, and the white ¼" hoses for the source
water ('IN') and the acidic ('OUT') are attached correctly to the bottom of the unit as
described in Steps 3 & 4. Remember the Water Inlet is near the Power Cord.
18

Attach Metal Spout:

Innner Cover
Inlet Water Hose
On Top
On the Bottom
(Red Dot)
The out hose will have a RED
dot that will match up with the
RED dot on the Diverter.
NEED HELP CALL 1-888-601-5886