Cybersecurity - Axis Q6215-LE User Manual

AXIS Q6215-LE PTZ Network Camera
Learn more
1. Go to PTZ > Preset positions.
2. Direct the camera view to the area you want to track, and click
3. Go to Apps > AXIS PTZ Autotracking.
4. Start and open the application.
In the application interface:
1. Go to Settings > Profiles.
2. Click and select the preset position you created in the device's web interface.
3. Click Done.
4. Select a Trigger area.
5. Go to Settings > Filters:
- To exclude small objects, set width and height.
- To exclude short-lived objects, set a time between 1 and 5 seconds.
6. Click Autotracking to start tracking.

Cybersecurity

Signed firmware
Signed firmware is implemented by the software vendor signing the firmware image with a private key. When a firmware has this
signature attached to it, a device will validate the firmware before accepting to install it. If the device detects that the firmware
integrity is compromised, the firmware upgrade will be rejected.
To learn more about Axis Edge Vault and cybersecurity features in Axis devices, go to axis.com/learning/white-papers and search for
cybersecurity.
Add preset position to create a preset position.
51