Axis Q6215-LE User Manual page 11

AXIS Q6215-LE PTZ Network Camera
Configure your device
Go to PTZ and set where you want the camera to be directed by creating a preset position.
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of actions, select Go to preset position.
4. Select the preset position you want the camera to go to.
5. Click Save.
Zoom in on a specific area automatically with gatekeeper
This example explains how to use the gatekeeper functionality to make the camera zoom in automatically on the license plate of a
car that passes through a gate. When the car has passed, the camera zooms out to the home position.
Create the preset positions:
1. Go to PTZ > Preset positions.
2. Create the home position that includes the entrance of the gate.
3. Create the zoomed-in preset position so that it covers the area in the image where you assume that the license plate
will appear.
Create a rule:
1. Go to System > Events and add a rule.
2. Name the rule "Gatekeeper".
3. In the list of actions, under Preset positions, select Go to preset position.
4. Select a Video channel.
5. Select the Preset position.
6. To make the camera wait a while before it returns to the home position, set a time for Home timeout.
7. Click Save.
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
Turn on shock detection:
1. Go to System > Detectors > Shock detection.
2. Turn on shock detection, and adjust the shock sensitivity.
Create a rule:
3. Go to System > Events > Rules and add a rule.
4. Type a name for the rule.
5. In the list of conditions, under Device status, select Shock detected.
6. Click + to add a second condition.
11