Datalogic MAGELLAN 1500i Quick Reference Manual page 11

PRESS
DURATION
4 Seconds
10 Seconds
a. By standard default, this function is normally disabled to prevent acciden-
tal activation by users.
b. Users should not perform scanner resets except under the direction of
trained systems support personnel.
Volume changes made using the Scanner Button are
lost when the scanner is powered down and are reset
to the configured setting. If you wish to permanently
change the volume, use the special programming
NOTE
labels in the Product Reference Guide.
FUNCTION
Scanner Diagnostics
a
Mode
b
Resets Scanner
COMMENT
This mode allows system
support personnel to
troubleshoot problems with the
scanner and is used to
determine if it can read bar
codes. Press the button for 8
seconds or cycle power to exit
Scanner Diagnostics Mode and
reset the scanner.
Only system support personnel
should perform a reset.
QUICK REFERENCE GUIDE
7