Surface Care; Cover Care; Cabinet Care; Spa Led Replacement - Fantasy Spas Aspire Owner's Manual

Table of Contents

Advertisement

SURFACE CARE

Do not use solvents or abrasive cleaners to clean
the spa. Typically, a mild detergent and water will
resolve cleaning issues.

COVER CARE

The cover is made with a solution dyed
polyester fabric and is an attractive, durable
foam insulation product. Monthly cleaning is
recommended to maintain its beauty and a
longer fabric life.
To clean and condition the polyester cover:
1. Remove and gently lean against a wall or
fence. If a cover lifter has been
installed keep cover closed and make
sure all seams are closed to prevent any
soap from entering the swim spa.
2. With a garden hose, spray the covers to
loosen and rinse away dirt or debris.
3. Add four tablespoons of mild soap or mild
dishwashing liquid with one gallons
(4 liters) of lukewarm water. Clean using
a soft bristle brush. Rinse thoroughly with
cold water and air dry.
IMPORTANT: Do not let the polyester
dry with a soap film on it before it can be
rinsed clean.
4. Scrub the cover's perimeter and side
flaps. Rinse clean with cold water.
5. Rinse off the underside of the cover with
water only (use no soap), and wipe it
clean with a dry rag.

CABINET CARE

Little maintenance is required to keep your spa
cabinet looking good.
Spa cabinet product should be cleaned as needed
to remove dirt and debris.
NO abrasive or harsh chemicals should be
used on the spa's cabinet.
NO solvents or cleaners containing aromatic
solvents should be used on the spas cabinet.
Hot soapy water is the best choice for cleaning
the spa's cabinet.
SPA MAINTENANCE
For further inquiries, please contact our Customer Service Team
Email: ahsservice@watkinsmfg.com
AVOID PROLONGED EXPOSURE TO DIRECT
SUNLIGHT OR EXCESSIVE TEMPERATURES
100ºF (38ºC) TO AVOID YOUR SPA CABINET
FROM BUCKLING.

SPA LED REPLACEMENT

Turn OFF the power to the spa.
Remove the equipment compartment access
door.
Locate the rear of the spa light.
To remove the LED board, turn outside
housing counter clockwise ¼ turn, and pull out
and remove LED board from socket.
Replace by reversing the above steps.
Phone: 888-961-7727
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

EmbraceDriftEnamorEnticeSplendorPremier

Table of Contents