Cover Care; Spa Light Bulb Replacement - Fantasy Spas ILLUSION Owner's Manual

Spas

COVER CARE

Please keep your cover free from dirt at all times. Use a cover cleaner or a warm mild soapy water to clean the

surface. Do not use any silicone-based products, as it will dry and may eventually crack the vinyl.

NOTE: Do not stand on the cover at any time. The cover must be removed when adding chemicals

to your hot tub. This will extend the life of your cover. The gases from burned off chemicals will be

trapped under the cover, if not removed. These gases will eat away at the protective lining of the

foam inserts. Eventually, the foam inserts will absorb the moisture from the hot tub and become

very heavy. This will not be covered under warranty.

SPA COLORED LIGHT LENS INSTALLATION

Colored lenses, red and blue, are included with the spa light. Colored lenses pop on and pull off

permanent clear light lens.

Turn OFF the power to the spa.

Remove the equipment compartment access door.

Locate the rear of the spa light.

To remove the bulb, turn outside housing counter clockwise ¼ turn, and remove bulb from socket.

(Replacement bulb part # FF21091 or part # FFLSL9-1 LED Multi-color Light)

Replace the bulb by reversing the above steps.

CAUTION: The replacement bulb must be the same rating as the factory

installed bulb. Check with your dealer or Fantasy for the correct replacement part.

SHELL COLOR AND APPEARANCE

Your hot tub shell has been designed to have the appearance of natural granite. Freeflow Products, Inc.

uses a technique which produces a unique look to every hot tub finish. Natural granite is not consistent in

appearance and your hot tub will duplicate that natural look. These inconsistencies in the granite serve to

enhance the individuality of each hot tub.

Notes:

_____________________________________________________________________________________

Table of Contents

Show Quick Links

Mirage Vision Espirit