EQUIPMENT ACCESS PANEL
Screw
Spa without wood siding:
To access the equipment compartment:
•
Remove 4 screws from Equipment Access Panel Door then remove door.
1
Equipment Access
Outside Wood Panel
Screw
3
Equipment Access
Inside Panel Door
Screw
Spa with wood siding:
To access the equipment compartment:
1. Remove screws from wood panel then slightly remove wood siding from spa knowing light
wires are still attached.
2. Pull on each light wire to remove from base. Remove wood panel from spa and set aside.
3. Remove screws from inside door panel, then remove inside panel and set aside.
7
EQUIPMENT ACCESS
Equipment Access
Panel Door
For further inquiries, please contact our Customer Service Team
Email: ahsservice@watkinsmfg.com
Serial Number
Equipment Compartment
Electrical Recess
& Drain Hose
(Cut-Outs may also be
located under door)
2
Pull on Wire to Remove
Equipment Compartment
Phone: 888-961-7727
Topside Control Panel