Enable Mode; Table 71 Command Summary: Enable Mode - ZyXEL Communications ZyXEL Dimension ES-2024 User Manual

ES-2024 Series User's Guide
Table 70 Command Summary: User Mode (continued)
COMMAND
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help

30.11.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 71 Command Summary: Enable Mode

COMMAND
baudrate <1|2|3|4|5>
boot config
cable- <port-list>
diagnostics
configure
copy running-config
tftp
disable
enable
erase running-config
191
DESCRIPTION
Determines the path a packet takes to a device in a
VLAN.
Displays command help information.
DESCRIPTION
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
Restarts the system.
Performs a basic connectivity test
on the ports. Displays "Ok" if
connector is inserted in the port,
"Open" if no connector is inserted
in the port or "Unknown" if this test
cannot determine the status.
Accesses Configuration mode. See
Section 30.11.3 on page
Displays command help
help
information.
Copies the specified attributes
interface port-
from one port to other ports.
channel <port-
list>[bandwidth
-limit ....]
Backs up running configuration to
tftp <ip>
the specified TFTP server with the
<remote-file>
specified file name.
Restores configuration with the
config <index>
specified filename from the
<ip> <remote-
specified TFTP server.
file>
Restores firmware via TFTP.
flash <ip>
<remote-file>
Exits Enable (or privileged) mode.
Accesses Enable (or privileged)
mode.
Displays command help
help
information.
196.
Chapter 30 Introducing the Commands
PRIVILEGE
0
0
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13