Configuring Switch Management Ip Address; Figure 23 Initial Setup Example: Management Ip Address - ZyXEL Communications ZyXEL Dimension ES-2024 User Manual

1 Click Advanced
Applications and VLAN
in the navigation panel.
Then click the VLAN
Port Setting link.
2 Enter 2 in the PVID field
for port 10 and click
Apply to set the VLAN
port setting and click the
Save button to save the
settings.

5.1.3 Configuring Switch Management IP Address

The default management IP address of the switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an
example.

Figure 23 Initial Setup Example: Management IP Address

1 Connect your computer to any Ethernet port on the switch. Make sure your computer is
in the same subnet as the switch.
2 Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar
to access the web configurator. See
Chapter 5 Initial Setup Example
Section 4.2 on page 48 for more information.
ES-2024 Series User's Guide
58