Appendix A System Parameters - ZyXEL Communications PES-1014 User Manual

Zyxel communications phoneline-ethernet switch user's guide
Table of Contents

Advertisement

CATEGORY
DEFAULT
VALUE
System
System Info.
Device Name
Device Location
Contact
System Configure
SuperMAC
Aging Control
Aging Time
Broadcast Storm
Control Threshold
Panel-Refresh
Time Interval
Counter-Refresh
Time Interval
Port Monitoring
Monitored Port ID
Snooping Port for
incoming packet
flow
Snooping Port for
outgoing packet
flow
Status
unchecked
Networking
IP Address
Subnet Mask
Default Gateway
System Parameters
OPTIONS
N/A
1-255 characters
N/A
1-255 characters
N/A
1-255 characters
disable
enable/disable
enable
enable/disable
10 min.
0-30 min.
48
16,32,48,64
10 sec.
1-60 sec.
10 sec.
1-60 sec.
N/A
any one port
N/A
a port except the
monitored port
N/A
a port except the
monitored port
checked/unchecked To activate/deactivate the function of the snooping port
N/A
Device IP
N/A
Device IP Mask
N/A
Default Gateway A gateway IP is used for the switch to connect to a non-
System Parameters
System Parameters
Give the system a name (case-sensitive)
Indicate the location of the system (case-sensitive)
Name of the person to contact for help (case-sensitive)
The capability to use an aggressive backing off algorithm
as collisions occur.
Capability to age the entries in the dynamic learning
address table
The time period a source MAC address can stay in the
address table
Limits the number of consecutive broadcast packets
received by the switch
Refresh time interval of the switch panel
Refresh time interval of the switch counter
A port to be monitored for its incoming and outgoing
packet flow
Assign a port to snoop the monitored port's incoming
packet flow
Assign a port to snoop the monitored port's outgoing packet
flow
The IP addresses of the devises included in the network
Set up a subnet mask
local IP
PES-1014 User's Guide
Appendix A
NOTE
A

Advertisement

Table of Contents
loading

Table of Contents