Table of Contents
Advertisement
SPEED/DUPLEX
100/FULL
10/FULL
100/HALF
10/HALF
5.3
Port Configuration
Click on a port's Port NO. in the All Ports Status screen to bring up the Port Configuration screen. Use this
screen to configure the specified port.
FIELD
Port ID
The letter or number that identifies this port.
Port Name
Give each port a name (up to 255 characters) for identification purposes.
This field is case sensitive.
Access Status
Select Enable or Disable to enable or disable port access.
Connector
This read-only field shows the port's connector type. There are RJ-11
phone connectors for the phoneline networking ports and TX (RJ-45)
Ethernet connectors for the Ethernet ports.
Port
Table 5-2 Speed/Duplex Settings
This port is simultaneously sending and receiving transmissions at
100 Mbps (full duplex).
This port is simultaneously sending and receiving transmissions at
10Mbps (full duplex).
This port is sending or receiving at 100Mbps in one direction only
at a time (half duplex).
This port is sending or receiving at 10Mbps in one direction only at
a time (half duplex).
Figure 5-3 Port Configuration
Table 5-3 Port Configuration Description
DESCRIPTION
DESCRIPTION
PES-1014 User's Guide
EXAMPLE
A
myportname
Enable
(default)
TX
5-3
Advertisement
Table of Contents
