All Ports Status; Figure 5-2 All Ports Status; Table 5-1 All Ports Status Description - ZyXEL Communications PES-1014 User Manual

PES-1014 User's Guide
5.2

All Ports Status

Move the cursor over the Port link and then click All Ports to display the All Ports Status screen shown next. This
screen shows the link status, transmission speed and duplex mode of the current ports. Click a port's number to link
directly to the selected port.
FIELD
Port NO. Click Port NO. to go to a port's configuring screen.
Port Name Give each port a name (up to 255 characters) for identification purposes.
This field is case sensitive.
Link This column indicates the current link status of each port. UP represents
connected DOWN represents disconnected.
Speed/Duplex This column shows each port's current transmission speed of 10 Mbps or
100 Mbps, as well as its duplex. Refer to Table 5-2 for more information.
Duplex- "Full" indicates simultaneously sending and receiving
transmissions at 10Mbps or 100Mbps. "Half" indicates sending or
receiving at 10Mbps or 100Mbps in one direction only at a time.
STP Port Status This column represents the port's status in STP (Spanning Tree
Protocol). Possible states are forwarding, listening, learning, blocking and
"–" (which means the Spanning Tree Protocol is
Chapter 10 for more information on STP.
5-2

Figure 5-2 All Ports Status

Table 5-1 All Ports Status Description

DESCRIPTION
disabled). Refer to
EXAMPLE
A
myport
Up
100/FULL
-
Port