Table of Contents
Advertisement
3.7.1 Connect the RJ45 test jack to one end of the cable to be tested.
3.7.2 Connect the remote unit to the other end of the cable.
3.7.3 Push TEST button to perform test. Example: The Cable Fault is a SHORT on Pair 1-2 and Pair 3-6,
the LCD status will be as follows:
Pair 1-2, Pair 3-6, Pair 4-5, Pair 7-8, SHIE and SHO will display at the same time.
3.7.4 Push TEST button again, Pair 1-2, Pair 3-6 and SHO will display. Continue to Push TEST button, the
next pairs will display.
4. SPECIFICATIONS
Accuracy is specified for a period one year after calibration and at 18 ⁰C to 28 ⁰C (64⁰F to 82 ⁰F) with
relative humidity to 80 %.
4.1 GENERAL
MAXIMUM VOLTAGE
FUSE PROTECTION
POWER SUPPLY
OPERATING TEMPERATURE
STORAGE TEMPERATURE
DIMENSION
WEIGHT
4.2 VOLTAGE
DC VOLTAGE
Range
Resolution
200m V
0.1mV
2V
1mV
20V
10mV
200V
100mV
1000V
1V
1000V DC or 700V AC
mA: F 200mA/250V 10A: no
9V battery, NEDA 1604 or 6F22
0 ⁰C to 40 ⁰C (32 ⁰F to 104 ⁰F)
-10 ⁰C to 50 ⁰C (14 ⁰F to 122 ⁰F)
185 x 85 x 44 mm
360 g
Accuracy
± 0.8 % of rdg ± 2 digits
± 1.2 % of rdg ± 3 digits
Advertisement
Table of Contents
