Battery And Fuse Replacement - Aktakom AM-1016 User Manual

Overload Protection: F 200Ma/250V fuse for 200μA to 200mA ranges
Frequency Range: 40Hz to 400Hz (for AC)
Response: Average, Calibrated in rms of sine wave
4.4 RESISTANCE
Range Resolution
200Ω 0.1Ω
2KΩ 1Ω
20KΩ 10Ω
200KΩ 100Ω
2MΩ 1KΩ
20MΩ 10KΩ
200MΩ 100KΩ
Maximum Open Circuit Voltage: 700mV (3V for200MΩ range).
Note: On 200MQ range, if short input, display will read 1 MQ, this 1 MQ should be subtracted from
measurement results.
Overload Protection: 250V dc or 250V ac rms
4.5 DIODE/CONTINUTY
Range I Description
Diode Shows the approximate forward
voltage drop
Continuit
Built - in buzzer will sound, if the
resistance under test is less than
about 70Ω
Overload Protection: 250V dc or 250V ac rms
5. BATTERY & FUSE REPLACEMENT
If the sign" "appears on the LCD display, it indicates that battery should be replaced.
Remove screws on the back cover and open the case (see the right photo). Replace the exhausted
battery with a new one.
Accuracy
± 0.8 % of rdg ± 3 digits
± 0.8 % of rdg ± 2 digit
± 0.8 % of rdg ± 2 digit
± 0.8 % of rdg ± 2 digit
± 0.8 % of rdg ± 2 digit
± 1.0 % of rdg ± 2 digit
± 5.0 % of (rdg-10digits)
± 10 digits