Advertisement
Step 15
Insert two SLIDE CAMS (10A) into the DRAWER SIDES (D26 and D27).
å
Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to the
å
DRAWER SIDES (D26 and D27). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Roller end
1
2
3
Page 20
10A
D27
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
418662
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D26
2
3
3S
Roller end
1
www.sauder.com/services
Advertisement
