Table of Contents
Advertisement
8.6.2 Set IR Light
When the environment is dim or dark, you can enable IR light to get a clear video.
Steps
1. Click Device Configuration → System Settings .
2. Select Infrared Settings.
Close
Disable IR light.
Open
Only when record starts, will IR light be enabled.
Auto
IR light will be enabled automatically.
3. Click Save.
8.6.3 Set Auto-Logout Time
You can set auto-logout time during which the device will sleep if there is no operation.
Steps
1. Click Device Configuration → System Settings .
2. Select Auto-Logout.
3. Click Save.
Result
During the set time, if there is no operation, the device will sleep automatically.
8.6.4 Set Video Stream Parameters
You can set the local record parameters, such as pre-record, post-record, and video clip time.
Steps
1. Click Device Configuration → System Settings .
2. Set the following parameters.
Pre-Record
The time before the record starts.
Post-Record
The time after the record ends.
Video Clip Time
The max. time length of the video file.
Body Camera User Manual
24
Advertisement
Table of Contents
