Product Recycling Information - ABB AquaProbe FEA200 User Manual

AquaProbe FEA100 / FEA200
Electromagnetic flowmeter – insertion-type flow sensors
The equipment is protected through double insulation.
This symbol, when noted on a product, indicates a potential hazard which could cause serious
personal injury and/or death.
The user should reference this instruction manual for operation and/or safety information.
This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical
shock and/or electrocution exists and indicates that only individuals qualified to work with
hazardous voltages should open the enclosure or remove the barrier.
This symbol indicates that the marked item can be hot and should not be touched without care.
This symbol indicates the presence of devices sensitive to electrostatic discharge and indicates
that care must be taken to prevent damage to them.
This symbol identifies a risk of chemical harm and indicates that only individuals qualified and
trained to work with chemicals should handle chemicals or perform maintenance on chemical
delivery systems associated with the equipment.
This symbol indicates the need for protective eye wear.
This symbol indicates the need for protective hand wear.
Electrical equipment marked with this symbol may not be disposed of in European public
disposal systems. In conformity with European local and national regulations, European
electrical equipment users must now return old or end-of-life equipment to the manufacturer for
disposal at no charge to the user.
Products marked with this symbol indicates that the product contains toxic or hazardous
substances or elements. The number inside the symbol indicates the environmental protection
use period in years.

1.4 Product Recycling Information

Electrical equipment marked with this symbol may not be disposed of in European public
disposal systems after 12 August 2005. In conformity with European local and national
regulations (EU Directive 2002/96/EC), European electrical equipment users must now return
old or end-of-life equipment to the manufacturer for disposal at no charge to the user.
Note. For return for recycling, please contact the equipment manufacturer or supplier for instructions on
how to return end-of-life equipment for proper disposal.
4
1 Safety
OI/FEA100/200–EN Rev. C