Panasonic LUMIX DC-FT7 Operating Instructions For Advanced Features page 184

13. Others
The recorded picture is too bright or dark.
• Check that the exposure is correctly compensated.
Multiple pictures are taken at one time.
• Is the drive mode set to a mode other than [Single]?
The subject is not focused properly.
• The subject is beyond the focus range of the camera.
The recorded picture is blurred.
The Image Stabiliser is not effective.
• The shutter speed will become slower and the Image Stabiliser function may not work properly
when taking pictures especially in dark places.
> We recommend using a tripod and the self-timer
shutter speed.
The recorded picture looks rough.
Noise appears on the picture.
• Try the following:
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction].
The subject appears distorted on the picture.
• If you record a moving subject when using the electronic shutter or recording motion picture or
a 4K photo, the subject may appear distorted on the picture. This is characteristic of MOS
sensors which serve as the camera's pickup sensors. This is not a malfunction.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
• This is characteristic of MOS sensors which serve as the camera's
pickup sensors.
This is not a malfunction.
• When using the electronic shutter (P127), lowering the shutter speed
may reduce the effect of the horizontal stripes.
(P70)
(P86)
(P35)
(P91)
(P71)
(P123)
184
when taking pictures with a slow