5. 4K Photo and Drive Settings
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
Press 4 (
2
Press 2/1 to select the drive mode, and then
press [MENU/SET].
A Drive mode
1 [Single]
2 [Burst]
(P139)
3 [4K PHOTO]
4 [Post Focus]
5 [Self Timer]
3
Focus on the subject and take a picture.
To cancel the drive mode
∫
Select [
] ([Single]) or [
• You can also cancel the self-timer by turning off the camera. (When [Self Timer Auto Off]
(P218)
is set to [ON])
).
When the shutter button is pressed, only one picture is
recorded.
Recordings are made in succession while the shutter
button is pressed.
When the shutter button is pressed, a 4K photo is
(P122)
recorded.
When the shutter button is pressed, Post Focus
(P132)
recording is performed.
When the shutter button is pressed, recording takes
(P141)
place after the set time has elapsed.
2
] in step
.
138
H