Introduction - Teledyne SP-F-SIM User Manual

2 Introduction

This manual describes the Spyglass Flame Simulators that are part of the Spyglass family of
products. Three different models of simulator are available for testing each type of Spyglass
Detector (IR3, IR3-H2 and UV-IR). Spyglass Flame Simulators provide fast and convenient means for
periodic flame detector and end-to-end system verification in the field without removing the detector
from the location or hazardous area. Maintenance costs are therefore reduced.
Spyglass Flame Simulators emit either IR or UV - IR radiation (according to the model) in a special
electromagnetic radiation pattern which simulates a fire to the detectors. The simulators are
lightweight, easy to use, with testing distances of up to 23 ft. (7m). The IR3 version is capable of
more than 1000 activations between battery charging. Spyglass Flame Simulators are ATEX
approved for use in hazardous Zone 1, Zone 2, Zone 21, Zone 22 areas.
Each simulator kit contains a carrying case, simulator, carrying strap, battery charger, user manual,
Allen key and a tool for removing the simulator rear cover.
SP-F-SIM-EN
Revision 1.0
Figure 1 - Flame Simulator Kit Layout
SP-F-SIM
Flame Simulators
USER MANUAL
9