Authentication Details - Check Point QUANTUM SPARK 1535 Getting Started Manual

Authentication Details

In the Authentication Details
wizard terminates abnormally:
Administrator Name
n
administrator. The name is case sensitive.
Password - A strong password has a minimum of 8 characters with at least one capital letter, one
n
lower case letter, and a special character. Use the Password strength meter to measure the strength
of your password.
Note - The meter is only an indicator and does not enforce creation of a password with a
specified number of character or character combination. To enforce password complexity,
click the checkbox.
Confirm Password
n
Country - Select a country from the list (for wireless network models).
n
The country where the license is set determines the wireless frequency and parameters, as the
regulations vary according to region.
If you are using a trial license, only basic radio settings, are allowed in all zones. A warning that
selected wireless radio settings are not applied shows on the
> License page. For more information on basic wireless radio settings, see sk159693.
If you select a country and install a valid license, but the wireless region of the device does not match
the selected country, a warning message shows and you must edit the country information. When the
country and wireless region match, you see the full settings.
page, enter the required details to log in to the appliance WebUI, or if the
- We recommend that you change the default "admin" login name of the
- Enter the password again.
Quantum Spark 1535 / 1555 Appliance Getting Started Guide | 22
Authentication Details
Summary page and also on the Device