Electrical Panel Description - Riello 20074125 Installation, Use And Maintenance Instructions

4.12

Electrical panel description

STAR/TRIANGLE
STARTER
DIRECT START
20078856
1 Ignition transformer
2 Burner state indicator light and reset button. For further
information see section "Burner ignition" on page 30
3 OFF-automatic-manual selector
4 Electrical control box
5 Power increase - power reduction selector
6 Earth terminal
7 Air pressure switch
8 Bracket for applying the kits
9 Relay with clean contacts for signalling the burner is operat-
ing
10 Relay with clean contacts for signalling the burner is in lock-
out
11 Auxiliary circuits fuse (includes a spare fuse)
12 Timer for star/triangle start up
13 Main terminal supply board
14 Supply cables and external connections passage. See sec-
tion "Electrical wiring" on page 27
15 Motor cables sheath
16 Maximum gas pressure switch sheath
17 Servomotor sheath
18 Direct start up line contactor
19 Thermal relay (with reset button)
20 Triangle contactor (Star/triangle start up)
21 Star contactor (Star/triangle start up)
22 Auxiliary contacts (Star/triangle start up)
23 Ionisation probe cable
24 Star/triangle start-up line contactor
Technical description of the burner
15 GB
20078857
Fig. 6
Fig. 7
20079034