Tuthill Fill-Rite TT10PB Operation And Safety Manual
  1. Manuals
  2. Brands
  3. Tuthill Manuals
  4. Measuring Instruments
  5. TT10P
  6. Operation and safety manual

Tuthill Fill-Rite TT10PB Operation And Safety Manual

In-line turbine meter
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Operation and Safety Manual
TT10P In-line Turbine Meter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fill-Rite TT10PB and is the answer not in the manual?

Questions and answers

Related Manuals for Tuthill Fill-Rite TT10PB

Summary of Contents for Tuthill Fill-Rite TT10PB

  • Page 1 Operation and Safety Manual TT10P In-line Turbine Meter...

  • Page 2: Safety Instructions

    TT10P (Chemical) Technical Information Dear Tuthill Customer, Thank you for buying a Tuthill product. Tuthill represents a new age in transfer and measuring Flow Ports 1" NPT or BSPP female inlet and equipment. This manual contains valuable outlet ports information about your new equipment and its Flow Range 2 to 35 U.S.

  • Page 3: General Description

    2. Thread the hose or pipe into ports until snug. General Description Be careful not to cross thread when starting threads or over-tighten the meter. The TT10 Series Meters are electronic turbine meters suitable for use in Hazardous Locations and extreme temperatures.

  • Page 4: Operational Functions

    Operational Functions Press Calibration/Fluid Type Factor (CAL) The TT10 Series Meters provide 20 preset factors for • Turns meter on. different fluid types/viscosities. • Displays accumulated total while pressed. Use of calibration factors is intended to provide the most If the accumulated total is larger than accurate metering solution for a specific fluid.

  • Page 5: Battery Replacement

    Fluid Calibration Flush Mode (FLSH) Fluid calibration requires a container of a known volume Use of Flush mode allows you to flush the meter without at least 5 gallons or larger that is compatible with the fluid adding volume to the meter totals. This is useful when being metered.

  • Page 6: Maintenance And Storage

    The batteries are accessed by removing the display as Regulatory described in the section showing how to rotate the display. The Battery Foam may be stuck to the batteries. Carefully Safety Testing Approvals remove it and reinstall at assembly. The Battery Foam protects the batteries and prevents them from becoming The Fill-Rite TT10 Series meters have been tested dislodged if the meter is handled roughly.
  • Page 7 Table 2: Troubleshooting Guide Problem Possible Cause Solution Notes • Dead batteries • Replace batteries Seal to electronics is Meter won't turn on • Damaged electronics • Replace the meter broken if the display is removed or punctured. Counter has exceeded Reset display to zero by Meter will continue to Flashing decimals...

This manual is also suitable for:

Fill-rite tt10 seriesFill-rite tt10p

Table of Contents