Page 1 USER MANUAL KS-M331 32” Multi-Functional Kiosk System KS-M331 M1...
Page 2 32” Multi-Functional Kiosk System COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted in Jan. 2023. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 4: Table Of Contents
Contents Revision History .................... vi Introduction ..................1-1 About This Manual ..............1-2 Getting Started ..................2-1 Package List ................2-2 System Overview ............... 2-3 2.2.1 Front View ................2-3 2.2.2 Rear View ................2-4 2.2.3 Side View ................2-5 2.2.4 Top View ................
Page 5 3.5.7 Dual USB 2.0 Ports (USB2) ..........3-12 3.5.8 Dual USB 3.0 Ports (USB1) ..........3-12 3.5.9 2nd Display Port (MDP2) ..........3-13 3.5.10 HDMI Port Connector (HDMI1) ......... 3-14 3.5.11 Cash Drawer Port (DRW) ..........3-15 3.5.12 Internal USB Wafer (JUSB1, JUSB9) ....... 3-18 3.5.13 Internal USB Wafer (JUSB7) ..........
Page 6 3.8.5 LVDS Connector (LVDS1) ..........3-37 3.8.6 USB 2.0 Connector (JUSB1, JUSB2, JUSB3) ....3-38 3.8.7 Backlight Voltage Selection (JP_INV1) ......3-39 3.8.8 LVDS Panel Voltage Control Selection (JP_VDD1) ..3-39 3.8.9 LVDS Backlight Control Selection (JP1) ......3-40 Software Utilities ................. 4-1 4.1.1 Introduction .................
Page 7 5.1.3.4 Advanced - ACPI Settings ..........5-17 5.1.3.5 Advanced - SMART Settings ........5-19 5.1.3.6 Advanced - F81967 Super IO Configuration ....5-20 5.1.3.7 Advanced - Hardware Monitor ........5-25 5.1.3.8 Advanced - F81967 Watchdog ........5-29 5.1.3.9 Advanced - USB Configuration ........5-31 5.1.3.10 Advanced - NVMe Configuration ........
Page 8 Appendix B Technical Summary ..........B-1 Block Diagram ..................B-2 Interrupt Map ....................B-3 I/O MAP ....................B-18 Memory Map ...................B-19 Configuring WatchDog Timer ..............B-22 Flash BIOS Update .................B-24...
Page 9: Revision History
Revision History The revision history of KS-M331 User Manual is described below: Version No. Revision History Date Initial Release 2023/01/06...
Page 10: Introduction
Introduction This chapter provides the introduction for KS-M331 system as well as the framework of the user manual. The following topic is included: • About This Manual Page: 1-1 KS-M331 SERIES USER MANUAL...
Page 11: About This Manual
Chapter 1 Introduction 1.1 About This Manual Thank you for purchasing our KS-M331 system. The KS-M331 is an updated system designed to be comparable with the highest performance of IBM AT personal computers. The KS-M331 provides faster processing speed, greater expandability and can handle more tasks than before.
Page 12: Getting Started
Getting Started This chapter provides the introduction for the KS-M331 system as well as the framework of the user manual. The following topics are included: • Package List • System Overview • System Specifications • Safety precautions Experienced users can jump to Chapter 3 on page 3-1 for a quick start.
Page 13: Package List
2.1 Package List If you discover any of the items listed below are damaged or lost, please contact your local distributor immediately. Item Q’ty KS-M331 Kiosk System Quick Reference Guide Manual / Driver DVD Door Key Page: 2-2 KS-M331 Series User Manual...
Page 14: System Overview
2.2 System Overview Unit: mm 2.2.1 Front View 2.1M Face Camera 32” FHD Display 32” P-CAP Touch Unattended Credit Card Holder Attended Credit Card Holder Available 2” or 3” 1D/2D Barcode Scanner Thermal Printer Page: 2-3 KS-M331 Series User Manual...
Page 15: Rear View
Chapter 2 Getting Started 2.2.2 Rear View LED Indication Light Rear I/O Ports Page: 2-4 KS-M331 Series User Manual...
Page 16: Side View
Chapter 2 Getting Started 2.2.3 Side View Unit: mm 156.25 Page: 2-5 KS-M331 Series User Manual...
Page 17: Top View
Chapter 2 Getting Started 2.2.4 Top View Unit: mm 2.2.5 Bottom View Page: 2-6 KS-M331 Series User Manual...
Page 18: System Specifications
 2" or 3" Standalone Thermal printer for 80mm paper Thermal Printer roll with paper near end  Resolution 203dpi / Printing Speed:170mm/s  Intel AC 9260 802.11a/b/g/n/ac WiFi/BT 5.1 Module, Wi-Fi Bluetooth Module M.2 2230,2x2 Antenna Page: 2-7 KS-M331 Series User Manual...
Page 19 Chapter 2 Getting Started Environment  0°C ~ 40°C (32°F~ 104°F) Operating Temp.  0°C ~ 60°C (32°F~ 140°F) Storage Temp.  20%~ 85% (no condensation) Humidity Page: 2-8 KS-M331 Series User Manual...
Page 20: Safety Precautions
Avoid direct sunlight exposure for a long period of time (for example, in a closed car in summer time. Also avoid the system from any heating device.). Or do not use KS-M331 when it has been left outdoors in a cold winter day. •...
Page 21: System Configuration
System Configuration This chapter provides the information for the KS-M331 system. It describes the jumper and connector settings, component locations, and pin assignment. The following topics are included: • System External I/O Port Diagram • Mainboard Component Locations & Jumper Setting •...
Page 22: System External I/O Ports Diagram
Chapter 3 System Configuration 3.1 System External I/O Ports Diagram Rear I/O Payment LAN (RJ45) (for credit card use) System LAN (RJ45) (for system use) AC Power Socket KS-M331 Series User Manual Page: 3-2...
Page 23: Mainboard Component Locations & Jumper Setting
JUSB7 M.2 E Key M.2 M Key USB7 M2_M2 M2_E1 JCMOS1 JRST1 JUSB1 JBAT1 HDMI1 DC_IN1 USB-C MDP2 MDP1 USB2 USB1 LAN1 DRW1 COM2 COM1 COM2 COM1 HDMI MDP1 MDP2 DC IN Type C Page: 3-3 KS-M331 Series User Manual...
Page 24: How To Set Jumpers
PIN1 and PIN2 to create one setting and shorting. You can also select to connect PIN2 and PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 3-4 KS-M331 Series User Manual...
Page 25 Chapter 3 System Configuration Jumper diagrams Jumper settings Page: 3-5 KS-M331 Series User Manual...
Page 26: Main Board Connector & Jumper Quick Reference Table
Power Output 24V Wafer 24V_OUT1 System LED Wafer JSYS_LED1 CPU FAN Wafer CPU_FAN1 Power Button Wafer JPWRBTN1 Battery Wafer JBAT1 System Reset Wafer JRST1 M.2 M-Key Connector for SSD M2_M1, M2_M2 M.2 E-Key Connector for Wi-Fi M2_E1 Page: 3-6 KS-M331 Series User Manual...
Page 27 3.5 Setting Main Board Connectors and Jumpers 3.5.1 Power Switch Connector Location: Power Switch Description: To turn on the system, open up the cover from the right side of KS-M331 Box and press the power switch briefly. ACTION ASSIGNMENT Click Release +3.3V...
Page 28 Chapter 3 System Configuration 3.5.3 1st Display Port (MDP1) Connector Location: MDP1 Description: 1st Display Port Proprietary Pin Assignment for Protech Original Display Only: ASSIGNMENT EDP_HPD_C_A DDIA_LANE0_DP_C EDP_BKLT_EN_R DDIA_LANE0_DN_C EDP_BKLT_CTRL_R MDP1 EDP_VDD_EN_R DDIA_LANE1_DP_C USB2_P3_DN_C DDIA_LANE1_DN_C USB2_P3_DP_C HD_GND LINE-OUT-R DDIA_AUX_DP_C LINE-OUT-L...
Page 29: Com Ports (Com1, Com2)
The voltage of external ports "COM1 and COM2" is made to control on BIOS for your convenience. Please refer to the descriptions of Serial Port 1 and Serial Port 2 Configuration under Advanced > F81967 Super IO Configuration menu in Chapter 5 BIOS Setup. Page: 3-9 KS-M331 Series User Manual...
Page 30: Lan Port (Lan1)
LAN1_MDI3_DP LAN1_MDI3_DN LAN1 LAN LED Indicator: Left Side LED Orange Color Blinking Giga LAN Message Active Green Color Blinking 10/100Mbps LAN Message Active Right Side LED Green Color On LAN switch / hub connected. Page: 3-10 KS-M331 Series User Manual...
Page 31: Usb Type C Port (Usb Type C)
USB Type C Port (USB Type C) Connector Location: USB Type C Description: USB Type C USB Type C ASSIGNMENT ASSIGNMENT USB31_P3_TX_DP_R USB31_P4_TX_DP_R USB31_P3_TX_DN_R USB31_P4_TX_DN_R TYPEC_PWR TYPEC_PWR USB2_P4_DP_R USB2_P4_DP_R USB2_P4_DN_R USB2_P4_DN_R TYPEC_PWR TYPEC_PWR USB31_P4_RX_DN_R USB31_P3_RX_DN_R USB31_P4_RX_DP_R USB31_P3_RX_DP_R Page: 3-11 KS-M331 Series User Manual...
Page 32: Dual Usb 2.0 Ports (Usb2)
Dual USB 3.0 Ports (USB1) Connector Location: USB1 Description: USB 3.0 Type A Ports USB 3.0 ASSIGNMENT ASSIGNMENT USB_PWR1 USB_PWR2 USB2_P1_DN USB2_P2_DN USB2_P1_DP USB2_P2_DP USB31_P1_RX_DN USB31_P2_RX_DN USB31_P1_RX_DP USB31_P2_RX_DP USB1 USB31_P1_TX_DN USB31_P2_TX_DN (USB3.0) USB31_P1_TX_DP USB31_P2_TX_DP Page: 3-12 KS-M331 Series User Manual...
Page 33: 2Nd Display Port (Mdp2)
Chapter 3 System Configuration 3.5.9 2nd Display Port (MDP2) Connector Location: MDP2 Description: 2nd Display Port Proprietary Pin Assignment for Protech Original Display Only: ASSIGNMENT EDP_HPD_C_B DDIB_LANE0_DP_C 2ND_BKLT_EN DDIB_LANE0_DN_C 2ND_BKLT_CTRL MDP2 2ND_VDD_EN DDIB_LANE1_DP_C USB2_P6_DN_C DDIB_LANE1_DN_C USB2_P6_DP_C DDIB_AUX_DP_C DDIB_AUX_DN_C V24P0 Page: 3-13...
Page 34: Hdmi Port Connector (Hdmi1)
Chapter 3 System Configuration 3.5.10 HDMI Port Connector (HDMI1) Connector Location: HDMI1 Description: Display Port Connector HDMI1 ASSIGNMENT ASSIGNMENT HDMI_P2 HDMI_N2 HDMI_P1 HDMI_N1 HDMI_P0 HDMI_N0 HDMI_CLKP HDMI_CLKN HDMI_SCL_5V HDMI_SDA_5V V5P0S_HDM HDMI_HPD Page: 3-14 KS-M331 Series User Manual...
Page 35: Cash Drawer Port (Drw)
2E (hex), then write/read data to/from the assigned register through data port 2F (hex). SIO Address LDN06, Cash drawer Open 0x81, bit1 LDN06, Cash drawer Status 0x81, bit0 Page: 3-15 KS-M331 Series User Manual...
Page 36 To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. Page: 3-16 KS-M331 Series User Manual...
Page 37 ; ------------------------- Enter to extended function mode ------------------------------- ; ----------------------- Select Logical Device 6 of Cash Drawer --------------------- ;---------------------------------Open the Cash Drawer ------------------------------ ;---------------------------------Close the Cash Drawer ------------------------------ ;---------------------------------Exit the extended function mode ------------------------- Page: 3-17 KS-M331 Series User Manual...
Page 38: Internal Usb Wafer (Jusb1, Jusb9)
Chapter 3 System Configuration 3.5.12 Internal USB Wafer (JUSB1, JUSB9) Connector Location: JUSB1, JUSB9 Description: Internal USB Wafer JUSB1 ASSIGNMENT USB_PWR9 USB2_P9_DN JUSB1 USB2_P9_DP JUSB9 ASSIGNMENT USB_PWR9 USB2_P9_DN JUSB9 USB2_P9_DP Page: 3-18 KS-M331 Series User Manual...
Page 39: Internal Usb Wafer (Jusb7)
Chapter 3 System Configuration 3.5.13 Internal USB Wafer (JUSB7) Connector Location: JUSB7 Description: Internal USB Wafer (Co-lay with side I/O USB7) JUSB7 ASSIGNMENT JUSB7 Page: 3-19 KS-M331 Series User Manual...
Page 40: M-Key Connector For Ssd (M2_M1)
Description: M.2 M-Key Connector for SSD M2_M1 ASSIGNMENT ASSIGNMENT V3P3S_M2_CPU V3P3S_M2_CPU PCIE4_RX_N3 PCIE4_RX_P3 M2_LED1 V3P3S_M2_CPU PCIE4_TX_N3 V3P3S_M2_CPU PCIE4_TX_P3 V3P3S_M2_CPU V3P3S_M2_CPU PCIE4_RX_N2 PCIE4_RX_P2 PCIE4_TX_N2 PCIE4_TX_P2 PCIE4_RX_N1 PCIE4_RX_P1 PCIE4_TX_N1 PCIE4_TX_P1 PCIE4_RX_N0_SATA1_RXP PCIE4_RX_P0_SATA1_RXN PCIE4_TX_N0_SATA1_TXN M2_KEYM_CPU_SSD_RST_R_N PCIE4_TX_P0_SATA1_TXP GPPC_D5_SRCCLKREQ0_N WAKE_N CLK_SRC0_DN Page: 3-20 KS-M331 Series User Manual...
Page 41 Chapter 3 System Configuration ASSIGNMENT ASSIGNMENT CLK_SRC0_DP M_KEY M_KEY M_KEY M_KEY V3P3S_M2_CPU PCIE_SEL V3P3S_M2_CPU V3P3S_M2_CPU Page: 3-21 KS-M331 Series User Manual...
Page 42 M.2 M-Key Connector for SSD (M2_M2) Connector Location: M2_M2 Description: M.2 M-Key Connector for SSD M2_M1 ASSIGNMENT ASSIGNMENT V3P3S_M2_CPU V3P3S_M2_CPU M2_LED2 V3P3S_M2_CPU V3P3S_M2_CPU V3P3S_M2_CPU V3P3S_M2_CPU PCIE4_RX_N1 SATA_0_RX_DP SATA_0_RX_DN SATA_0_TX_DN M2_KEYM_CPU_SSD_RST_R_N SATA_0_TX_DP GPPC_D5_SRCCLKREQ0_N WAKE_N CLK_SRC1_DN Page: 3-22 KS-M331 Series User Manual...
Page 43 Chapter 3 System Configuration ASSIGNMENT ASSIGNMENT CLK_SRC1_DP M_KEY M_KEY M_KEY M_KEY V3P3S_M2_1 V3P3S_M2_1 V3P3S_M2_1 Page: 3-23 KS-M331 Series User Manual...
Page 44: E-Key Connector For Wi-Fi (M2_E1)
CNV_RF_RESET_N CNVI_WR_D1N CNVI_WR_D1P CRF_XTAL_CLKREQ M.2_BT_LED2_N CNVI_WR_D0N CNVI_WR_D0P CNV_BRI_RSP CNVI_WR_CLKN E-KEY CNVI_WR_CLKP E-KEY E-KEY E-KEY E-KEY E-KEY E-KEY CNV_RGI_DT E-KEY CNV_RGI_RSP CNV_BRI_DT PCIE3_P10_UFS_11_TX_DP MLK_RST_N PCIE3_P10_UFS_11_TX_DN MLK_DATA MLK_CLK PCIE3_P10_UFS_11_RX_DP PCIE3_P10_UFS_11_RX_DN CLK_SRC5_DP SUS_CLK CLK_SRC5_DN M.2_WLAN_PERST_R_N GPPC_A13_BT_RF_KILL_N GPPC_H11_SRCCLKREQ5_N Page: 3-24 KS-M331 Series User Manual...
Page 45 Chapter 3 System Configuration ASSIGNMENT ASSIGNMENT GPPC_B15_WIFI_RF_KILL_N GPPC_C23_WIFI_WAKE_N CNVI_WT_D1N CNVI_WT_D1P TP11 CNVI_WT_D0N CNVI_WT_D0P V3.3A_WLAN CNVI_WT_CLKN V3.3A_WLAN CNVI_WT_CLKP Page: 3-25 KS-M331 Series User Manual...
Page 46: Speaker Wafer (Jspk1)
VOUTN JSPK1 3.5.18 Microphone Connector (JMIC1) Connector Location: JMIC1 Description: Mic Pin Header ASSIGNMENT HD_MIC1-R_L HD_GND JMIC1 HD_MIC1-L_L 3.5.19 Power Output 24V Wafer (J24V_OUT1) Connector Location: J24V_OUT1 Power Output 24V Wafer Description: ASSIGNMENT J24V_OUT1 Page: 3-26 KS-M331 Series User Manual...
Page 47: System Led Wafer (Jsys_Led1)
Chapter 3 System Configuration 3.5.20 System LED Wafer (JSYS_LED1) Connector Location: JSYS_LED1 Wafer Description: System LED ASSIGNMENT V5P0 JSYS_LED1 3.5.21 CPU Fan Wafer (CPU_FAN1) Connector Location: CPU_FAN1 Description: CPU Fan Wafer ASSIGNMENT CPU_FAN1 V12P0 sense Control Page: 3-27 KS-M331 Series User Manual...
Page 48: Power Button Wafer (Jpwrbtn1)
Description: Power Button Wafer ASSIGNMENT V3P3A JPWRBTN1 3.5.23 Battery Wafer (JBAT1) Connector Location: JBAT1 Description: Battery Wafer ASSIGNMENT VRTC_BATT JBAT1 3.5.24 System Reset Wafer (JRST1) Connector Location: JRST1 Description: System Reset Wafer ASSIGNMENT RST_SW JRST1 Page: 3-28 KS-M331 Series User Manual...
Page 49: Usb Signal Selection (Jp1)
(for M2_E1) (Default Setting) JUSB1-USB2.0 D+ (for JUSB1) 3.5.26 USB Signal Selection (JP2) Jumper Location: JP2 Description: USB Signal Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION M2_E1-USB2.0 D- (for M2_E1) (Default Setting) JUSB1-USB2.0 D- (for JUSB1) Page: 3-29 KS-M331 Series User Manual...
Page 50: Cash Drawer Voltage Selection (Jp3)
Chapter 3 System Configuration 3.5.27 Cash Drawer Voltage Selection (JP3) Jumper Location: JP3 Description: Cash Drawer Voltage Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION (Default Setting) Page: 3-30 KS-M331 Series User Manual...
Page 51: Clear Cmos Data Selection (Jpcmos1)
Note: To clear CMOS data, you must power off the computer and set the jumper to “Clear CMOS” as illustrated above. After five to six seconds, set the jumper back to “Normal” and power on the computer. Page: 3-31 KS-M331 Series User Manual...
Page 52: A/D Board Component Locations & Jumper Setting
Chapter 3 System Configuration 3.6 A/D Board Component Locations & Jumper Setting A/D Board: PR-J500 JSPK1 MDP1 JEDP2 JP_VDD1 JP_INV1 LVDS1 JUSB1 JUSB3 JUSB2 Page: 3-32 KS-M331 Series User Manual...
Page 53: A/D Board Connector & Jumper Quick Reference Table
LVDS Panel Voltage Selection JP_VDD1 LVDS Backlight Control CONNECTOR NAME 1st Display Port Connector MDP1 Embedded DisplayPort JEDP2 Connector Speaker Connector JSPK1 Inverter Connector JINV1 LVDS Connector LVDS1 USB 2.0 Connector JUSB1, JUSB2, JUSB3 Page: 3-33 KS-M331 Series User Manual...
Page 54 Chapter 3 System Configuration 3.8 Setting A/D Board Connectors and Jumpers 3.8.1 1st Display Port Connector (MDP1) Connector Location: MDP1 Description: 1st Display Port Connector Proprietary Pin Assignment for Protech Original Display Only: ASSIGNMENT EDP_HPD_C_A DDIA_LANE0_DP_C EDP_BKLT_EN_R DDIA_LANE0_DN_C EDP_BKLT_CTRL_R EDP_VDD_EN_R...
Page 55: Embedded Displayport Connector (Jedp2)
Embedded DisplayPort Connector (JEDP2) Connector Location: JEDP2 Description: Embedded DisplayPort Connector JEDP2 ASSIGNMENT ASSIGNMENT LVDS_VDD EDP_SELF_TEST EDP_HPD NGND EDP_LANE1_DN_C EDP_LANE1_DP_C EDP_LANE0_DN_C EDP_BKLT_EN EDP_LANE0_DP_C DP_BKLT_CTRL EDP_DCR_EN EDP_AUX_DN_C EDP_AUX_DP_C INV_VCC INV_VCC LVDS_VDD INV_VCC LVDS_VDD INV_VCC LVDS_VDD Page: 3-35 KS-M331 Series User Manual...
Page 56: Speaker Connector (Jspk1)
Chapter 3 System Configuration 3.8.3 Speaker Connector (JSPK1) Connector Location: JSPK1 Description: Speaker Connector ASSIGNMENT VOUTP VOUTN JSPK1 3.8.4 Inverter Connector (JINV1) Connector Location: JINV1 Description: Inverter Connector ASSIGNMENT INV_VCC INV_VCC LVDS_BKLCTL LVDS_BKLTEN JINV1 Page: 3-36 KS-M331 Series User Manual...
Page 57: Lvds Connector (Lvds1)
LVDS Connector (LVDS1) Connector Location: LVDS1 Description: LVDS Connector ASSIGNMENT ASSIGNMENT LVDS_VDD LVDS_CLKB_DN LVDS_CLKB_DP LVDS_B2_DN LVDS_B2_DP LVDS_B1_DN LVDS_B1_DP LVDS_B3_DP LVDS_B3_DN LVDS_B0_DP LVDS_B0_DN LVDS_CLKA_DP LVDS_CLKA_DN LVDS_A2_DP LVDS_A2_DN LVDS_A1_DP LVDS_A1_DN LVDS_A0_DP LVDS_A0_DN LVDS1 LVDS_A3_DP LVDS_A3_DN LVDS_VDD LVDS_VDD Page: 3-37 KS-M331 Series User Manual...
Page 58: Usb 2.0 Connector (Jusb1, Jusb2, Jusb3)
USB 2.0 Connector (JUSB1, JUSB2, JUSB3) Connector Location: JUSB1, JUSB2, JUSB3 Description: USB 2.0 Connector JUSB1 ASSIGNMENT ASSIGNMENT V5P0S_USB2 V5P0S_USB1 HUB1_DN2 HUB1_DN1 HUB1_DP2 HUB1_DP1 JUSB1 JUSB2 ASSIGNMENT V5P0S_USB3 HUB1_DN3 HUB1_DP3 JUSB2 JUSB3 ASSIGNMENT V5P0S_USB4 HUB1_DN42 HUB1_DP42 JUSB3 Page: 3-38 KS-M331 Series User Manual...
Page 59: Backlight Voltage Selection (Jp_Inv1)
(Default Setting) JP_INV1 (VIN_INV) JP_INV1 3.8.8 LVDS Panel Voltage Control Selection (JP_VDD1) Jumper Location: JP_VDD1 LVDS Panel Voltage Control Selection Description: SELECTION JUMPER SETTING JUMPER ILLUSTRATION 3.3V (LVDS_VDD) JP_VDD1 (LVDS_VDD) JP_VDD1 (LVDS_VDD) (Default Setting) JP_VDD1 Page: 3-39 KS-M331 Series User Manual...
Page 60: Lvds Backlight Control Selection (Jp1)
Chapter 3 System Configuration 3.8.9 LVDS Backlight Control Selection (JP1) Jumper Location: JP1 LVDS Backlight Control Selection Description: SELECTION JUMPER SETTING JUMPER ILLUSTRATION 3.3V (LVDS_BKLCTL) (Default Setting) (LVDS_BKLCTL) Page: 3-40 KS-M331 Series User Manual...
Page 61: Software Utilities
• Installing Intel ® Management Engine Components Driver Installer • Installing Intel ® Serial I/O Driver Utility • Installing Intel ® Wireless Driver Utility • Installing Intel ® Bluetooth Driver Utility • LED Indicator Control API KS-M331 Series User Manual Page 4-1...
Page 62 Chapter 4 Software Utilities 4.1.1 Introduction Enclosed with the KS-M331 Series package is our driver utilities, which comes in a DVD-ROM format. Refer to the following table for driver locations Windows 11 IoT Ent 22H2 GAC Filename (Assume that Purpose...
Page 63 The utility pack is to be installed only for Windows 10 64Bit, and it should be installed immediately after the OS installation is finished. Please follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk. Enter the “Chipset” folder where the Chipset driver is located.
Page 64 4.1.3 Installing Graphics Driver Utility To install the Graphics driver utility, follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk. Enter the “Graphics” folder where the driver is located Click the “Installer.exe” file for driver installation.
Page 65 4.1.4 Installing Sound Driver Utility To install the Sound Driver, follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk. Open the “Sound” folder where the driver is located. Click the “Setup.exe” file for driver installation.
Page 66 Once the installation is completed, shut down the system and restart KS-M331 for the changes to take effect. For more details on the installation procedure, refer to the Readme.txt file that you can find on LAN Driver Utility.
Page 67: Intel Management Engine Components Installer Installation
Intel Management Engine Components Installer Installation To install the ME Driver, follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk Enter the “ME” folder where the driver is located Click “SetupME.exe” file for driver installation.
Page 68: Installing Intel Serial I/O Driver Utility
Installing Intel Serial I/O Driver Utility To install the Serial I/O Driver, follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk. Open the “Serial IO” folder where the driver is located. Click the “SetupSerialIO.exe” file for driver installation.
Page 69: Installing Intel Wireless Driver Utility
Installing Intel Wireless Driver Utility To install the Wireless Driver, follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk. Open the “Wireless” folder where the driver is located. Click the “WiFi-22.170.0-Driver64-Win10-Win11.exe” file for driver installation.
Page 70: Installing Intel Bluetooth Driver Utility
Installing Intel Bluetooth Driver Utility To install the Bluetooth Driver, follow the steps below: Connect the USB DVD-ROM device to KS-M331 and insert the driver disk. Open the “Bluetooth” folder where the driver is located. Click the “BT-22.170.0-32-64UWD-Win10-Win11.exe” file for driver installation.
Page 71: Led Control Api
H/W : KR-7230RD-00N Model : KS-M331 4.2.2 Package Content Operation System Windows 10 / Windows 11 Directory Contents / File Name Description KS-M331\KS-M331 KS-M331 LED control API User V1.0\Driver\Device\ User Guide Guide_P01-7230-000-01-221130.doc KR7230 Directory Function File Name Description KS-M331\KS-M331 LED function A01-7230-000-01-221130.dll...
Page 72: Demo Program
Chapter 4 Software Utilities 4.2.3 Demo Program 1. Select Console Port and Open to active KS-M331 Series User Manual Page 4-12...
Page 73 Chapter 4 Software Utilities 2. FW & API version Information • FW will show the version by example F00-7290-000-01-221130. • API will show the version by example A01-7230-000-01-221130. KS-M331 Series User Manual Page 4-13...
Page 74 Chapter 4 Software Utilities 3. Function Test : Blink timing setting • Blink time span = 100ms * value KS-M331 Series User Manual Page 4-14...
Page 75 • Tick the box to trigger the LED to blink. • Turn on the LED by clicking the Low button to trigger. • Turn off the LED by clicking the High button to trigger. KS-M331 Series User Manual Page 4-15...
Page 76: Led Control Api Function List
Return Value mode : 1, 0 -1 : fail 1, 0 : gpio status mode : 2 -1 : fail 2 : enter the blink status 0 : stop the blink status KS-M331 Series User Manual Page 4-16...
Page 77 Chapter 4 Software Utilities Example KS-M331 Series User Manual Page 4-17...
Page 78 - Blink 1s => MC_API_USB_SINGLE_WRITE(4, 2, 10) Suppose you want to control orange LED (port 3-1) - ON => MC_API_USB_SINGLE_WRITE(5, 1, 0) - OFF => MC_API_USB_SINGLE_WRITE(5, 0, 0) - Blink 1s => MC_API_USB_SINGLE_WRITE(5, 2, 10) KS-M331 Series User Manual Page 4-18...
Page 79: Bios Setup
The BIOS Setup Utilities consist of the following menu items: • Main Menu • Advanced Menu • Chipset Menu • Security Menu • Boot Menu • Save & Exit Menu KS-M331 Series User Manual Page 5-1...
Page 80: Introduction
Chapter 5 BIOS Setup 5.1 Introduction The KS-M331 uses an AMI Aptio BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated. The SPI Flash contains the BIOS Setup program, Power-on Self-Test (POST), the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.
Page 81 3. The system configuration is reset after the user configures to clear CMOS data via the JPCMOS1 jumper. 4. The power of the CMOS RAM became lost and the system configuration has been erased. All the menu settings are described in details in this chapter. KS-M331 Series User Manual Page 5-3...
Page 82: Accessing Setup Utility
Setup program. In a moment, the main menu of the Aptio Setup Utility will appear on the screen: KS-M331 Series User Manual Page 5-4...
Page 83 Chapter 5 BIOS Setup BIOS Setup Menu Initialization Screen KS-M331 Series User Manual Page 5-5...
Page 84 Load the previous configuration values. <F3> Load the default configuration values. <F4> Save the current values and exit the BIOS setup menu. Close the sub-menu. <Esc> Trigger the confirmation to exit BIOS setup menu. KS-M331 Series User Manual Page 5-6...
Page 85: Main
The Main menu allows you to view the BIOS Information and change the system date and time. Use tab to switch between date elements. This screen also displays the BIOS version (project) and BIOS Build Date and Time. BIOS Main Menu KS-M331 Series User Manual Page 5-7...
Page 86 Sets the clock of the system. The format is [Hour: Minute: Second]. Users can directly System Time hour, minute, second enter values or use <+> or <-> arrow keys to increase/decrease it. KS-M331 Series User Manual Page 5-8...
Page 87: Advanced
This menu provides advanced the sub-menu items such as CPU Configuration, PCH-FW Configuration, Trusted Computing, ACPI Settings, SMART Settings, F81967 Super IO Configuration, Hardware Monitor, F81967 Watchdog, USB Configuration and NVMe Configuration. BIOS Advanced Menu KS-M331 Series User Manual Page 5-9...
Page 88 F81967 Super IO System Super IO Chip parameters. Sub-Menu Configuration Hardware Monitor Monitor hardware status Sub-Menu F819676 Watchdog F81967 Watchdog parameters Sub-Menu USB Configuration USB Configuration Parameters. Sub-Menu NVMe Configuration NVMe Device Options Settings. Sub-Menu KS-M331 Series User Manual Page 5-10...
Page 89: Advanced - Cpu Configuration
Chapter 5 BIOS Setup 5.1.3.1 Advanced - CPU Configuration Menu Path Advanced > CPU Configuration The CPU Configuration provides advanced CPU settings and some information about CPU. CPU Configuration Screen KS-M331 Series User Manual Page 5-11...
Page 90 When enabled, VMM can utilize the Disabled Virtualization additional hardware capabilities provided - Enabled (Default) Technology by Vanderpool Technology Disabled When Disabled, only one thread per Hyper-threading - Enabled (Default) enabled core is enabled. KS-M331 Series User Manual Page 5-12...
Page 91: Advanced - Pch-Fw Configuration
Advanced > PCH-FW Configuration The PCH-FW allows users to view the information about ME (Management Engine) firmware information, such ME firmware version, firmware mode and firmware SKU, and set PTT configuration. PCH-FW Configuration Screen KS-M331 Series User Manual Page 5-13...
Page 92 ME Firmware SKU No changeable options Displays the ME Firmware SKU. PTT Configuration Sub-Menu Configures PTT. Advanced - PCH-FW Configuration - PTT Configuration Menu Path Advanced > PCH-FW Configuration > PTT Configuration PTT Configuration Screen KS-M331 Series User Manual Page 5-14...
Page 93: Advanced - Trusted Computing
The Trusted Computing allows users to enable / disable BIOS support for security device. The operating system will now show Security Device. The TCG EFI protocol and INT1A interface will not be available. Trusted Computing Screen KS-M331 Series User Manual Page 5-15...
Page 94 TPM 1.2 TPM 2.0 devices, Auto will support both Device Select - TPM 2.0 with the default set to TPM 2.0 devices if - Auto (Default) not found, TPM 1.2 devices will be enumerated. KS-M331 Series User Manual Page 5-16...
Page 95: Advanced - Acpi Settings
The ACPI Settings allows users to configure relevant ACPI (Advanced Configuration and Power Management Interface) settings, such as enable / disable ACPI Auto Configuration, enable / disable Hibernation, ACPI Sleep State and S3 Video Repost. ACPI Settings Screen KS-M331 Series User Manual Page 5-17...
Page 96 Selects the highest ACPI sleep state the ACPI Sleep State - S3 (Suspend to RAM) system will enter when the SUSPEND (Default) button is pressed. - Disabled (Default) S3 Video Repost Enables or Disables S3 Video Repost. - Enabled KS-M331 Series User Manual Page 5-18...
Page 97: Advanced - Smart Settings
The SMART Settings allows users to configure relevant System SMART settings, such as SMART Self Test. SMART Settings Screen BIOS Setting Options Description/Purpose - Disabled (Default) Run SMART Self Test on all HDDS during SMART Self Test - Enabled POST. KS-M331 Series User Manual Page 5-19...
Page 98: Advanced - F81967 Super Io Configuration
F81967 Super IO Configuration Screen BIOS Setting Options Description/Purpose Configure the parameters of Serial Port 1 Serial Port 1 Configuration Sub-Menu (COMA). Configure the parameters of Serial Port 2 Serial Port 2 Configuration Sub-Menu (COMB). KS-M331 Series User Manual Page 5-20...
Page 99 Chapter 5 BIOS Setup F81967 Super IO Configuration – Serial Port 1 Configuration Menu Path Advanced > F81967 Super IO Configuration > Serial Port 1 Configuration Serial Port 1 Configuration Screen KS-M331 Series User Manual Page 5-21...
Page 100 - IO=3F8h; IRQ=4; settings for Serial Port 1. - IO=3F8h; IRQ=3,4,5,6,7,10,11; Change Settings - IO=2F8h; IRQ=3,4,5,6,7,10,11; - IO=3E8h; IRQ=3,4,5,6,7,10,11; - IO=2E8h; IRQ=3,4,5,6,7,10,11; - RI (Default) Select COM port voltage Voltage - 5V - 12V KS-M331 Series User Manual Page 5-22...
Page 101 Chapter 5 BIOS Setup F81967 Super IO Configuration – Serial Port 2 Configuration Menu Path Advanced > F81967 Super IO Configuration > Serial Port 2 Configuration Serial Port 2 Configuration Screen KS-M331 Series User Manual Page 5-23...
Page 102 - IO=2F8h; IRQ=3; settings for Serial Port 2. - IO=3F8h; IRQ=3,4,5,6,7,10,11; Change Settings - IO=2F8h; IRQ=3,4,5,6,7,10,11; - IO=3E8h; IRQ=3,4,5,6,7,10,11; - IO=2E8h; IRQ=3,4,5,6,7,10,11; - RI (Defaults) Select COM port voltage Voltage - 5V - 12V KS-M331 Series User Manual Page 5-24...
Page 103: Advanced - Hardware Monitor
Advanced > Hardware Monitor The Hardware Monitor allows users to monitor the health and status of the system such as CPU temperature, system temperature, CPU fan speed, and voltage levels in supply. Hardware Monitor Screen KS-M331 Series User Manual Page 5-25...
Page 104 VSB5V in supply. Detects and displays the voltage level of VCC12V No changeable options the VCC12 in supply. Detects and displays the voltage level of VBAT No changeable options the VBAT in supply. KS-M331 Series User Manual Page 5-26...
Page 105 Chapter 5 BIOS Setup Smart Fan Mode Configuration Menu Path Advanced > Hardware Monitor > Smart Fan Mode Configuration Smart Fan Mode Configuration Screen KS-M331 Series User Manual Page 5-27...
Page 106 - Auto Duty-Cycle Mode Smart Fan Mode select for CPU Fan. Control (Defaults) Manual mode fan control, user can Manual Duty Mode Numeric (from 1 to 100) write expected duty cycle (PWM fan type) 1-100. KS-M331 Series User Manual Page 5-28...
Page 107: Advanced - F81967 Watchdog
Advanced - F81967 Watchdog Menu Path Advanced > F81967 Watchdog If the system hangs or fails to respond, enable the F81967 watchdog function to trigger a system reset via the 255-level watchdog timer. F81967 Watchdog Screen KS-M331 Series User Manual Page 5-29...
Page 108 Chapter 5 BIOS Setup BIOS Setting Options Description/Purpose - Enabled Enable/Disable Super IO Watchdog Enable WatchDog - Disabled (Defaults) timer settings. Watchdog Timer Count Numeric (from 10 to 255) The number of count for Timer. KS-M331 Series User Manual Page 5-30...
Page 109: Advanced - Usb Configuration
Chapter 5 BIOS Setup 5.1.3.9 Advanced - USB Configuration Menu Path Advanced > USB Configuration The USB Configuration allows users to configure advanced USB settings such as USB mass storage driver support. USB Configuration Screen KS-M331 Series User Manual Page 5-31...
Page 110 - Floppy their media format. Optical drives are STORAGE - Forced FDD emulated as 'CD-ROM', drives with no DEVICES: - Hard Disk media will be emulated according to a drive [drive(s)] - CD-ROM type. KS-M331 Series User Manual Page 5-32...
Page 111: Advanced - Nvme Configuration
Advanced - NVMe Configuration Menu Path Advanced > NVMe Configuration The NVMe Configuration allows users to view the information about NVMe Device. NVMe Configuration Screen BIOS Setting Options Description/Purpose NVMe Configuration No changeable options Displays NVMe device. KS-M331 Series User Manual Page 5-33...
Page 112: Chipset
(SA) and PCH-IO configuration parameters. Chipset Menu Screen BIOS Setting Options Description/Purpose System Agent (SA) Sets the Parameter for System Agent (SA) Sub-Menu Parameters configuration. PCH-IO Configuration Sub-Menu Sets the Parameter for PCH configuration. KS-M331 Series User Manual Page 5-34...
Page 113: System Agent (Sa) Configuration
Chapter 5 BIOS Setup 5.1.4.1 System Agent (SA) Configuration Menu Path Chipset > System Agent (SA) Configuration System Agent (SA) Configuration Screen KS-M331 Series User Manual Page 5-35...
Page 114 Memory Configuration parameters Configuration - Disabled VT-d Enables or Disables VT-d function. - Enabled (Default) System Agent (SA) Configuration – Memory Configuration Menu Path Chipset > System Agent (SA) Configuration > Memory Configuration Memory Configuration Screen KS-M331 Series User Manual Page 5-36...
Page 115: Pch Io Configuration
No changeable options Slot 0 Slot 0 Subtitle. Displays the size of Controller 0 Size No changeable options Channel 0 Slot 0. 5.1.4.2 PCH IO Configuration Menu Path Chipset > PCH IO Configuration PCH-IO Configuration Screen KS-M331 Series User Manual Page 5-37...
Page 116 Enable - Enabled (Default) wake the system. Specifies what state to go to when Restore AC Power - Power On power is re-applied following a power Loss - Power Off (Default) failure (G3 state). KS-M331 Series User Manual Page 5-38...
Page 117 Chapter 5 BIOS Setup PCH-IO Configuration – SATA And RST Configuration Menu Path Chipset > PCH-IO Configuration > SATA And RST Configuration SATA And RST Configuration Screen KS-M331 Series User Manual Page 5-39...
Page 118 Displays the SATA device’s name. - Disabled Enables or Disables SATA Port Port 0 - 1 - Enabled (Default) Device. - Disabled (Defaults) Enable or Disable SATA Port Device Hot Plug - Enabled Hot Plug function. KS-M331 Series User Manual Page 5-40...
Page 119: Security
Setup utility than a user. Heed that a user password does not provide access to most of the features in the Setup utility. Security Menu Screen KS-M331 Series User Manual Page 5-41...
Page 120 <Enter>, and the password dialog entry box appears. 2. Select the configured Administrator Password or User Password that you want to delete. Leave the dialog box blank and press <Enter>. 3. Press <Enter> again when the password confirmation box appears. KS-M331 Series User Manual Page 5-42...
Page 121: Boot
This menu provides control items for system boot configuration such as setting setup prompt timeout, enabling/disabling quiet boot and fast boot, changing the boot order from the available bootable device(s) and Screen Rotation policy. Boot Menu Screen KS-M331 Series User Manual Page 5-43...
Page 122 Enables or Disables Fast Boot options. - Enabled - Normal Screen Rotation - Right Rotation (Defaults) Controls Screen display direction. Policy - Left Rotation - Reversion Boot Option - [Drive(s)] Sets the system boot order. #1~#n - Disabled KS-M331 Series User Manual Page 5-44...
Page 123: Save & Exit
Discard Changes and Reset to discard any changes you have made and restore the factory BIOS defaults. Load User Defaults You may simply press F3 at any time to load the Optimized Values which resets all BIOS settings to the factory defaults. KS-M331 Series User Manual Page 5-45...
Page 124 Chapter 5 BIOS Setup Save & Exit Menu Screen KS-M331 Series User Manual Page 5-46...
Page 125 Saves the changes done so far as User No changeable options Defaults Defaults. Restore User Restores the User Defaults to all the setup No changeable options Defaults options. Boot Override - [Drive(s)] Forces to boot from selected [drive(s)]. KS-M331 Series User Manual Page 5-47...
Page 126: Appendix A System Diagrams
Appendix A System Diagrams This appendix includes the easy maintenance diagrams, exploded diagrams of the system and the parts list as well as the part numbers of KS-M331 system. • Easy Maintenance • Back Case Body Assembly Exploded Diagram •...
Page 127: Easy Maintenance
Step 2. From Back Case B Cover (No.4), unscrew 2 x M4 slip nuts (No.3) to remove the Cover. System Back Case M4 slip nut x 3 P/N: 23-142-40450801 Thermal Printer Back Case B Cover M3x6mm Washer Screw x 1 P/N:22-232-30060211 (continued on the next page) KS-M331 Series User Manual Page A-2...
Page 128 Step 3. Fasten Washers (x16) and M8 screws (x 8) to install Back Case onto the Tripod as shown and install back Thermal Printer to complete. M8 screw x 8 P/N: 22-252-80020011 Washer x 16 Tripod P/N: 23-202-08150191 KS-M331 Series User Manual Page A-3...
Page 129 Connector Step 2. Place the new AC Power Socket and LAN Connector (No.4) as shown into the proper position and tighten M4x5mm screw (No.3) to secure. (Please see the picture on the next page.) KS-M331 Series User Manual Page A-4...
Page 130 AC Blank Cover to complete. Step 3. Install AC Blank Cover. Step 2. Install AC Power Socket and LAN Connector. M3x6mm washer screw x 4 P/N:22-232-30060211 M4 slip nut x 2 P/N:23-142-40450801 M4x5mm screw x 1 P/N:22-275-40050911 KS-M331 Series User Manual Page A-5...
Page 131 Step 1. Determine the location of the wall mount bracket to be installed on the wall and use a pencil to mark the locations that the sleeve anchors will be fastened. 20-206-02116482 MOUNT BRACKET-RAIL KS-M331 Series User Manual Page A-6...
Page 132 P/N: 22-000-02000001 Sleeve Anchor 1/4” 37mm Sleeve Anchor 1/4” The sleeve part should be hiddened into the wall. Step 3. Fix the system body mount bracket-rail onto the wall: KS-M331 Series User Manual Page A-7...
Page 133 4 screws (M6x1.0Px12mm (P/N: 22-251-60012011). M6 x12mm screw x 4 System Back Case (P/N: 22-251-60012011) Mount Bracket-Hook (P/N: 20-206-02115482) Step 5. Attach the system installed with the mount bracket-hook onto the mount bracket-rail fixed on the wall. KS-M331 Series User Manual Page A-8...
Page 134 Appendix A System Diagrams Step 6. Adjust the system body to secure the mount bracket-hook into mount bracket-rail firmly. Step 7. Fasten the two M6x25mm (P/N: 22-225-60025031) screws to complete the installation. KS-M331 Series User Manual Page A-9...
Page 135: Back Case Body Assembly Exploded Diagram
Appendix A System Diagrams Back Case Body Assembly Exploded Diagram KS-M331 Series User Manual Page A-10...
Page 136 KF-7330 Door Hock Extension Spring 23-002-00000092 (ψ8.6) Round Washer Head Screw #2 / 22-232-30007011 M3x0.5Px7mm Slip Nuts (M4x0.7P,H=4.5mm) 23-142-40450801 Hex Head With Spring Washer Screw #3 22-252-60015011 / M6x1.0Px15mm Round Head Screw M4x0.7Px25mm 22-232-40025011 Hole Plug (Φ5mm) 30-067-04200000 KS-M331 Series User Manual Page A-11...
Page 137: Back Case Tp-808 Thermal Printer Assembly Exploded Diagram
Back Case TP-808 Thermal Printer Assembly Exploded Diagram ITEM Description Part No. Q’ty KS-M332-TP808 Printer Holder 20-229-03006524 Desktop 2" POS 52-701-00026012 Printer,Speed:260mm/sec Round Head With Spring Washer Screw 22-232-30060211 M3x0.5Px6mm Flat Head Screw 2/T3.0x8mm 22-112-30008311 Slip Nuts (M4x0.7P,H=4.5mm) 23-142-40450801 KS-M331 Series User Manual Page A-12...
Page 138: Back Case Wp837 Thermal Printer Assembly Exploded Diagram
KS-M332 WP837 Holder SUBIC SUB 20-229-03007524 3" Panel Thermal Printer,Speed:170mm/sec, USB and 52-701-01017000 RS-232C (w/2"紙捲用隔板) (English) (White) Round Head With Spring Washer Screw 22-232-30060211 M3x0.5Px6mm Round Washer Head Screw #2 / 22-232-40008011 M4x0.7Px8mm Slip Nuts (M4x0.7P, H=4.5mm) 23-142-40450801 KS-M331 Series User Manual Page A-13...
Page 139: Back Case Main Board Assembly Exploded Diagram
Appendix A System Diagrams Back Case Main Board Assembly Exploded Diagram KS-M331 Series User Manual Page A-14...
Page 140 Q’ty KS-M332 D Host Back Plate 20-205-03002524 PA-J500 System Sub Assembly KS-M332 PA-J500 SYS Top Cover 20-204-03009524 Fillister Head Screw M4x0.7Px5mm 22-275-40050911 (Black) Round Head With Spring Washer Screw 22-232-30060211 M3x0.5Px6mm CPU Box Sticker KS-M331 Series User Manual Page A-15...
Page 141: Back Case Power Supply Assembly Exploded Diagram
Appendix A System Diagrams Back Case Power Supply Assembly Exploded Diagram KS-M331 Series User Manual Page A-16...
Page 142 (White) KS-1130 Handle 20-035-35001410 M5 screw M6 screw Round Washer Head Screw #2 / 22-232-30007011 M3x0.5Px7mm Round Washer Head Screw 22-242-30005311 M3x0.5Px5mm Round Head With Spring Washer Screw 22-232-30060211 M3x0.5Px6mm Slip Nuts (M4x0.7P,H=4.5mm) 23-142-40450801 KS-M331 Series User Manual Page A-17...
Page 143: Pa-J500 Box Assembly Exploded Diagram
Appendix A System Diagrams PA-J500 Box Assembly Exploded Diagram M3 screw x 5 pcs P/N: 22-232-30060211 M3 screw x 2 pcs P/N: 22-215-30005311 KS-M331 Series User Manual Page A-18...
Page 144 HSF, PB-J500 M/B for PA-J500, Tiger lake-U Pentium 7505 with DDR4, HDMI, PB-J500-G1A-04N PT- DPx2, TPM, COMx2, USBx6, M.2(M&E key) Round Head With Spring Washer Screw 22-232-30060211 M3x0.5Px6mm Flat Head Screw #2 / 22-215-30005311 M3x0.5Px4mm(Black) KS-M331 Series User Manual Page A-19...
Page 145: Installing Body Onto Stand Assembly Exploded Diagram
Appendix A System Diagrams Installing Body Onto Stand Assembly Exploded Diagram KS-M331 Series User Manual Page A-20...
Page 146 Q’ty KS-M332 Front Door Sub-Asm KS-M332 Back Case Sub-Asm KS-M332 Stand Sub-Asm Door Stay 20-030-10031000 Fillister Head Screw M4x0.7Px5mm 22-275-40050911 (Black) Hex Head With Spring Washer Screw #3 22-252-80020011 / M8x1.25Px20mm Washer (OD=φ19mm,ID=φ8mmx1.5T) 23-202-08150191 KS-M331 Series User Manual Page A-21...
Page 147: Front Case Assembly Exploded Diagram
M4 slip nut x 34 pcs P/N: 23-142-40450801 ITEM Description Part No. Q’ty KS-M332 Front Case SUB 20-201-02061524 (w/Paint)(White) KS-M332 LCD Module KS-M332 KDS Touch Holder 20-229-02061524 (w/Paint)(White) 32" P-CAP Multi-Touch Panel (G/F) 52-380-07066801 KS-M331 Series User Manual Page A-22...
Page 148 MH-5100 Compression Spring 23-002-01000252 (ψ6.1x25) KS-M332 Release Spring Holder 20-229-03005524 CAM Lock 20-025-35002000 KS-M332 Printer Door Latch-A 20-247-03001524 KS-M332 Printer Door Latch-B 20-247-03002524 Flat Head Screw #2 / 22-215-30005311 M3x0.5Px4mm(Black) Fillister Head Screw M4x0.7Px4mm 22-272-40004911 KS-M331 Series User Manual Page A-23...
Page 149 LED Cable (5V240mA,JP24181-2, Wave Length: 620~635nm)(Red LED Light 27-018-52302072 Plate) (LED to 2F/P2.0/TIN) L=100mm KS-M332 Light Base 20-232-03001524 Slip Nuts (M4x0.7P, H=4.5mm) 23-142-40450801 MH-5100 Battery Lock Spring 23-002-00000332 (ψ0.3) KS-M332 Front Eva Sponge 30-013-15500524 (98x22x0.5mm) KS-M331 Series User Manual Page A-24...
Page 150: Front Case Assembly Exploded Diagram
M4 slip nut x 34 pcs P/N: 23-142-40450801 ITEM Description Part No. Q’ty KS-M332 Front Case SUB (w/Paint) 20-201-02061524 (White) KS-M332 LCD Module KS-M332 KDS Touch Holder 20-229-02061524 (w/Paint)(White) 32" P-CAP Multi-Touch Panel (G/F) 52-380-07066801 KS-M331 Series User Manual Page A-25...
Page 151 MH-5100 Compression Spring 23-002-01000252 (ψ6.1x25) KS-M332 Release Spring Holder 20-229-03005524 CAM Lock 20-025-35002000 KS-M332 Printer Door Latch-A 20-247-03001524 KS-M332 Printer Door Latch-B 20-247-03002524 Flat Head Screw #2 / 22-215-30005311 M3x0.5Px4mm(Black) Fillister Head Screw M4x0.7Px4mm 22-272-40004911 KS-M331 Series User Manual Page A-26...
Page 152 Length: 620~635nm)(Red LED Light 27-018-52302072 Plate) (LED to 2F/P2.0/TIN) L=100mm KS-M332 Light Base 20-232-03001524 Slip Nuts (M4x0.7P, H=4.5mm) 23-142-40450801 MH-5100 Battery Lock Spring 23-002-00000332 (ψ0.3) KS-M332 Front Eva Sponge 30-013-15500524 (98x22x0.5mm) Round Washer Head Screw 22-242-30005311 M3x0.5Px5mm KS-M331 Series User Manual Page A-27...
Page 153: Lcd Panel Display Assembly Exploded Diagram
32" TFT LCD Panel (LED 52-351-05320602 Backlight),400nits,FHD(1920x1080) KS-M332 LCD Holder-LL 20-229-03002524 KS-M332 LCD- Holder -S 20-229-03003524 KS-M332 LCD Holder -L 20-229-03001524 KS-M332 LCD Holder -SS 20-229-03004524 KS-M332 Camera Cover 20-204-03001524 Round Head Screw M2x0.4Px5mm 22-232-20005011 KS-M331 Series User Manual Page A-28...
Page 154 ELO E370668 HSF, PR-J500 AD Board, LVDS 12V VDD, P-cap Touch(USB), with speaker PR-J500-G1D-20N (Remove On Semi) KR-7232RD-00N KR-7232RD-00N LED Driver Board 52-152-29203175 PB-J500 to PR-J500 Mini DP Cable 27-072-52424111 (M/GOLD to M/GOLD) L=1200mm KS-M331 Series User Manual Page A-29...
Page 155: System Stand Assembly Exploded Diagram
Part No. Q’ty KS-M332 Stand Base (w/Paint)(Black) 20-232-29061524 KS-M332 Stand Base B Cover-B 20-204-03008524 KS-M332 Stand C Pillar (w/Paint) (Black) 20-232-29062524 KS-M332 Stand Base F Cover 20-204-02065524 (w/Paint)(Black) KS-M332 Stand Base B Cover 20-204-02064524 (w/Paint)(Black) KS-M331 Series User Manual Page A-30...
Page 156 Appendix A System Diagrams ITEM Description Part No. Q’ty KS-M332 Stand C Pillar Cover(w/Paint) 20-232-02061524 (Black) Fillister Head Screw M4x0.7Px5mm 22-275-40050911 (Black) Slip Nuts (M8x1.25P,H=7.5mm) 23-142-80801201 Flat Head Screw #2 / 22-215-30005311 M3x0.5Px4mm(Black) KS-M331 Series User Manual Page A-31...
Page 157: Appendix B Technical Summary
The following topics are included: • Block Diagram • Interrupt Map • I/O Map • DMA Channels Map • Memory Map • Configuring WatchDog Timer • Flash BIOS Update KS-M331 Series User Manual Page B-1...
Page 158: Block Diagram
Appendix B Technical Summary Block Diagram KS-M331 Series User Manual Page B-2...
Page 159: Interrupt Map
IRQ 65 Microsoft ACPI-Compliant System IRQ 66 Microsoft ACPI-Compliant System IRQ 67 Microsoft ACPI-Compliant System IRQ 68 Microsoft ACPI-Compliant System IRQ 69 Microsoft ACPI-Compliant System IRQ 70 Microsoft ACPI-Compliant System IRQ 71 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-3...
Page 160 IRQ 94 Microsoft ACPI-Compliant System IRQ 95 Microsoft ACPI-Compliant System IRQ 96 Microsoft ACPI-Compliant System IRQ 97 Microsoft ACPI-Compliant System IRQ 98 Microsoft ACPI-Compliant System IRQ 99 Microsoft ACPI-Compliant System IRQ 100 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-4...
Page 161 IRQ 123 Microsoft ACPI-Compliant System IRQ 124 Microsoft ACPI-Compliant System IRQ 125 Microsoft ACPI-Compliant System IRQ 126 Microsoft ACPI-Compliant System IRQ 127 Microsoft ACPI-Compliant System IRQ 128 Microsoft ACPI-Compliant System IRQ 129 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-5...
Page 162 IRQ 152 Microsoft ACPI-Compliant System IRQ 153 Microsoft ACPI-Compliant System IRQ 154 Microsoft ACPI-Compliant System IRQ 155 Microsoft ACPI-Compliant System IRQ 156 Microsoft ACPI-Compliant System IRQ 157 Microsoft ACPI-Compliant System IRQ 158 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-6...
Page 163 IRQ 181 Microsoft ACPI-Compliant System IRQ 182 Microsoft ACPI-Compliant System IRQ 183 Microsoft ACPI-Compliant System IRQ 184 Microsoft ACPI-Compliant System IRQ 185 Microsoft ACPI-Compliant System IRQ 186 Microsoft ACPI-Compliant System IRQ 187 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-7...
Page 164 IRQ 261 Microsoft ACPI-Compliant System IRQ 262 Microsoft ACPI-Compliant System IRQ 263 Microsoft ACPI-Compliant System IRQ 264 Microsoft ACPI-Compliant System IRQ 265 Microsoft ACPI-Compliant System IRQ 266 Microsoft ACPI-Compliant System IRQ 267 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-8...
Page 165 IRQ 290 Microsoft ACPI-Compliant System IRQ 291 Microsoft ACPI-Compliant System IRQ 292 Microsoft ACPI-Compliant System IRQ 293 Microsoft ACPI-Compliant System IRQ 294 Microsoft ACPI-Compliant System IRQ 295 Microsoft ACPI-Compliant System IRQ 296 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-9...
Page 166 IRQ 319 Microsoft ACPI-Compliant System IRQ 320 Microsoft ACPI-Compliant System IRQ 321 Microsoft ACPI-Compliant System IRQ 322 Microsoft ACPI-Compliant System IRQ 323 Microsoft ACPI-Compliant System IRQ 324 Microsoft ACPI-Compliant System IRQ 325 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-10...
Page 167 IRQ 348 Microsoft ACPI-Compliant System IRQ 349 Microsoft ACPI-Compliant System IRQ 350 Microsoft ACPI-Compliant System IRQ 351 Microsoft ACPI-Compliant System IRQ 352 Microsoft ACPI-Compliant System IRQ 353 Microsoft ACPI-Compliant System IRQ 354 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-11...
Page 168 IRQ 377 Microsoft ACPI-Compliant System IRQ 378 Microsoft ACPI-Compliant System IRQ 379 Microsoft ACPI-Compliant System IRQ 380 Microsoft ACPI-Compliant System IRQ 381 Microsoft ACPI-Compliant System IRQ 382 Microsoft ACPI-Compliant System IRQ 383 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-12...
Page 169 IRQ 406 Microsoft ACPI-Compliant System IRQ 407 Microsoft ACPI-Compliant System IRQ 408 Microsoft ACPI-Compliant System IRQ 409 Microsoft ACPI-Compliant System IRQ 410 Microsoft ACPI-Compliant System IRQ 411 Microsoft ACPI-Compliant System IRQ 412 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-13...
Page 170 IRQ 435 Microsoft ACPI-Compliant System IRQ 436 Microsoft ACPI-Compliant System IRQ 437 Microsoft ACPI-Compliant System IRQ 438 Microsoft ACPI-Compliant System IRQ 439 Microsoft ACPI-Compliant System IRQ 440 Microsoft ACPI-Compliant System IRQ 441 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-14...
Page 171 IRQ 464 Microsoft ACPI-Compliant System IRQ 465 Microsoft ACPI-Compliant System IRQ 466 Microsoft ACPI-Compliant System IRQ 467 Microsoft ACPI-Compliant System IRQ 468 Microsoft ACPI-Compliant System IRQ 469 Microsoft ACPI-Compliant System IRQ 470 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-15...
Page 172 IRQ 493 Microsoft ACPI-Compliant System IRQ 494 Microsoft ACPI-Compliant System IRQ 495 Microsoft ACPI-Compliant System IRQ 496 Microsoft ACPI-Compliant System IRQ 497 Microsoft ACPI-Compliant System IRQ 498 Microsoft ACPI-Compliant System IRQ 499 Microsoft ACPI-Compliant System KS-M331 Series User Manual Page B-16...
Page 173 Standard NVM Express Controller IRQ 4294967293 Standard NVM Express Controller IRQ 4294967294 Intel(R) PEG60 - 9A09 Note: These resource information were gathered using Windows 10. (The IRQ could be assigned differently depending on OS) KS-M331 Series User Manual Page B-17...
Page 174: I/O Map
0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B2-0x000000B3 Motherboard resources 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000002F8-0x000002FF Communications Port (COM2) 0x000003F8-0x000003FF Communications Port (COM1) 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000680-0x0000069F Motherboard resources KS-M331 Series User Manual Page B-18...
Page 175: Memory Map
Motherboard resources 0xFEE00000-0xFEEFFFFF Motherboard resources Intel(R) Ethernet Connection (13) 0xBFFE0000-0xBFFFFFFF I219-V Intel(R) Serial IO UART Host 0xFFCFB000-0xFFCFBFFF Controller - A0A8 Intel(R) USB 3.10 eXtensible Host 0x1310000-0x131FFFF Controller - 1.20 (Microsoft) 0xFED00000-0xFED003FF High precision event timer KS-M331 Series User Manual Page B-19...
Page 176 Intel(R) Serial IO GPIO Host 0xFD6D0000-0xFD6DFFFF Controller - INT34C5 Intel(R) Serial IO GPIO Host 0xFD6A0000-0xFD6AFFFF Controller - INT34C5 Intel(R) Serial IO GPIO Host 0xFD690000-0xFD69FFFF Controller - INT34C5 0xFED40000-0xFED44FFF Trusted Platform Module 2.0 Intel(R) Management Engine 0xFFCF9000-0xFFCF9FFF Interface #1 KS-M331 Series User Manual Page B-20...
Page 177 PCI Express Root Complex 0x50400000-0x50403FFF Standard NVM Express Controller 0x50400000-0x50403FFF PCI Express Root Complex 0x50400000-0x50403FFF Intel(R) PEG60 - 9A09 0x50520000-0x50521FFF Standard SATA AHCI Controller 0x50522000-0x505227FF Standard SATA AHCI Controller 0x50523000-0x505230FF Standard SATA AHCI Controller KS-M331 Series User Manual Page B-21...
Page 178: Configuring Watchdog Timer
To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. KS-M331 Series User Manual Page B-22...
Page 179 ; ---------------- Set timeout interval as 30seconds and start counting -------------- ;------------------------------- Enable Watch PME-------------------------------------------- ;-------------------------- Set second as counting unit -------------------------------------- ;-------------------------- Start the watchdog timer -------------------------------------- ;---------------------------------Exit the extended function mode ------------------------- KS-M331 Series User Manual Page B-23...
Page 180: Flash Bios Update
(2) Turn on the computer and press <ESC> or <DEL> key during boot to enter BIOS Setup. (3) Select [Boot] menu and set the USB bootable device to be the boot device. (4) Press <F4> key to save configuration and exit the BIOS setup menu. KS-M331 Series User Manual Page B-24...
Page 181 BIOS ROM and the system will be unable to boot up next time. After the BIOS update procedure is completed, the following messages will be shown: KS-M331 Series User Manual Page B-25...
Page 182 Restart the system and boot up with the new BIOS configurations. The BIOS Update is completed after the system is restarted. Reboot the system and verify if the BIOS version shown on the initialization screen has been updated. KS-M331 Series User Manual Page B-26...
Page 183 Appendix B Technical Summary KS-M331 Series User Manual Page B-27...

protech KS-M331 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for protech KS-M331

Summary of Contents for protech KS-M331

Table of Contents