1. Manuals
  2. Brands
  3. protech Manuals
  4. Digital Signage
  5. KS-1130
  6. User manual

protech KS-1130 User Manual

Self-service payment kiosk
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER
MANUAL
KS-1130 M1
KS-1130
Self-Service
Payment Kiosk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KS-1130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for protech KS-1130

Summary of Contents for protech KS-1130

  • Page 1 USER MANUAL KS-1130 Self-Service Payment Kiosk KS-1130 M1...
  • Page 2 KS-1130 Self-Service Payment Kiosk COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted in June 2018. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
  • Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Entry Level System............2-7 2.3.3 Safety Precautions ............2-9 System Configuration ................. 3-1 Rear I/O Ports Diagram ............. 3-2 KS-1130 High-End Level System Main Board ......3-3 3.2.1 DC-IN Port ................. 3-3 3.2.2 COM Ports & VGA Connector (COM1, COM2, VGA, COM3, COM3_1, COM4, COM5)...........
  • Page 5 JP_COM2, JP_COM3, JP_COM4) ....3-16 3.2.11.2 i-Button Connector (I-BUT) ......3-16 3.2.11.3 i-Buttion Function Selection (JP22, JP23, JP24) ................ 3-17 3.2.11.4 Internal USB 2.0 Connectors (USB6, USB7, USB9-1) ............3-18 3.2.11.5 Cash Drawer Selection (JP17) ...... 3-19 3.2.11.6 Cash Drawer Power Selection (JP16) ... 3-23 3.2.11.7 LED Connectors (PWR_LED, HDD_LED) ..
  • Page 6 3.2.11.28 Clear CMOS Data Selection (JCMOS1) ..3-45 3.2.12 GPIO Connector (GPIO1) ..........3-46 3.2.13 Audio Jack (LINE_OUT1) ..........3-46 KS-1130 Entry Level System Main Board ....... 3-47 3.3.1 DC-IN Port (DC-IN)............3-47 3.3.2 VGA Port (VGA) ............... 3-47 3.3.3 COM Ports (COM1, COM2, COM3) ........
  • Page 7 3.3.13.3 i-Button Connector (JI_BUTTON1)....3-56 3.3.13.4 i-Button Function Selection (JP20, JP21, JP22) ................. 3-57 3.3.13.5 Cash Drawer Control Selection (JP37) ..3-58 3.3.13.6 Cash Drawer Power Selection (JP29) ... 3-62 3.3.13.7 USB Connectors (USB1, USB2, USB6, USB7)................3-63 3.3.13.8 LED Connector (LED1_1)......
  • Page 8 JPWR_4P1, JPWR_4P2) ......3-70 3.3.13.23 Printer Connector (LPT1) ......3-71 3.3.13.24 Mini-PCIe Connector (SLOT1) ...... 3-72 Software Utilities ................. 4-1 Introduction ................4-2 4.1.1 Driver and OS Support For High-End Level System ..4-2 ® 4.1.1.1 Intel Chipset Software Installation Utility ..4-3 4.1.1.2 VGA Driver Utility ..........
  • Page 9 5.2.2.3 Advanced - PCH-FW Configuration ....5-12 5.2.2.4 Advanced - ACPI Settings ......5-13 5.2.2.5 Advanced - F81866 Super IO Configuration . 5-14 5.2.2.6 Advanced - Hardware Monitor ....... 5-20 5.2.2.7 Advanced - F81866 Watchdog Configuration 5-22 5.2.2.8 Advanced - S5 RTC Wake Settings ....5-23 5.2.2.9 Advanced - Network Stack Configuration ..
  • Page 10 5.3.6 Save & Exit ..............5-80 Appendix A System Diagrams ............ A-1 KS-1130 Front Door Assembly Exploded Diagram ........A-2 KS-1130 Back Case Assembly Exploded Diagram ........A-4 KS-1130 Free Stand Assembly Exploded Diagram ........A-6 KS-1130 Power Supply Assembly Exploded Diagram ......A-8 KS-1130 Thermal Printer Assembly Exploded Diagram ......A-9...
  • Page 11 Revision History The revision history of KS-1130 User Manual is described below: Version No. Revision History Page No. Date Initial Release 2018/06 viii...

  • Page 12: Introduction

    Introduction This chapter provides the introduction for KS-1130 as well as the framework of the user manual. The following topic is included: • About This Manual Page: 1-1 KS-1130 SERIES USER MANUAL...

  • Page 13: About This Manual

    It is not intended for general users. The following section outlines the structure of this user manual. Chapter 1 Introduction This chapter provides the introduction for KS-1130 as well as the framework of the user manual. Chapter 2 Getting Started This chapter describes the package contents and outlines KS-1130 specifications.

  • Page 14: Getting Started

    Getting Started This chapter provides the information for KS-1130 system. It describes the package contents and outlines the motherboard specifications. The following topics are included: • Package List • KS-1130 Specification • Safety Precautions Experienced users can go to Chapter 3 System Configuration on page 3-1 for a quick start.

  • Page 15: Packing List

    Chapter 2 Getting Started Packing List If you discover any of the items listed below are damaged or list, please contact your local distributor immediately. Item Q’ty KS-1130 Quick Reference Guide Manual / Driver DVD Page: 2-2 KS-1130 SERIES USER MANUAL...

  • Page 16: System Specifications

     1920 x 1080 Max. Resolution  500 cd/m Brightness  Projected capacitive touch Touchscreen  Horizontal: (R) 89° / (L) 89° View Angle  Vertical: (U) 89° / (L) 89° Estimated luminance  50,000 hours lifetime Page: 2-3 KS-1130 SERIES USER MANUAL...
  • Page 17  Read/write ISO 14443A Mifare RFID Reader (optional) Environment  CE / FCC EMC & Safety  0°C ~ 35°C (32°F~ 95°F) Operating Temperature  -5°C ~ 60°C (23°F~ 140°F) Storage Temperature  20%~ 85% (no condensation) Humidity Page: 2-4 KS-1130 SERIES USER MANUAL...

  • Page 18: 2.3 System Overview

    Chapter 2 Getting Started 2.3 System Overview Unit: mm 2.3.1 High-End Level System Page: 2-5 KS-1130 SERIES USER MANUAL...
  • Page 19 Chapter 2 Getting Started Page: 2-6 KS-1130 SERIES USER MANUAL...

  • Page 20: Entry Level System

    Chapter 2 Getting Started 2.3.2 Entry Level System Page: 2-7 KS-1130 SERIES USER MANUAL...
  • Page 21 Chapter 2 Getting Started Page: 2-8 KS-1130 SERIES USER MANUAL...

  • Page 22: Safety Precautions

    Avoid direct sunlight exposure for a long period of time (for example, in a closed car in summer time. Also avoid the system from any heating device.). Or do not use KS-1130 when it has been left outdoors in a cold winter day. •...

  • Page 23: System Configuration

    The following topics are included: • Rear I/O Ports Diagram • Main Board Jumper Settings and Component Locations • How to Set Jumpers • Setting Main Board Connectors and Jumpers Page: 3-1 KS-1130 SERIES USER MANUAL...

  • Page 24: 3.1 Rear I/O Ports Diagram

    Chapter 3 System Configuration 3.1 Rear I/O Ports Diagram Page: 3-2 KS-1130 SERIES USER MANUAL...

  • Page 25: Ks-1130 High-End Level System Main Board

    Chapter 3 System Configuration KS-1130 High-End Level System Main Board 3.2.1 DC-IN Port Port Location: DC-IN Description: DC Power-In Port (rear IO) ASSIGNMENT ASSIGNMENT +24V +24V DC-IN 3.2.2 COM Ports & VGA Connectors (COM1, COM2, VGA, COM3, COM3_1, COM4, COM5) There are multiple COM ports enhanced in this board: COM1, COM_VGA (COM2+VGA Port), COM3, COM3_1, COM4 and COM5.
  • Page 26 RI / +5V / +12V COM3_DTRJ_I selectable COM3 and COM3_1 can't be used simultaneously. Port Location: COM3_1 Description: COM3_1 Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT COM3_DCDJ_I COM3_DSRJ_I COM3_RX_I COM3_RTSJ_I COM3_TX_I COM3_CTSJ_I COM3_DTRJ_I COM3_RI_SEL COM3_1 Page: 3-4 KS-1130 SERIES USER MANUAL...
  • Page 27 ASSIGNMENT ASSIGNMENT COM4_DCDJ_I COM4_DSRJ_I COM4_RX_I COM4_RTSJ_I COM4_TX_I COM4_CTSJ_I COM4_DTRJ_I COM4_RI_SEL COM4_1 Port Location: COM5 Description: COM5 Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT COM5_DCDJ_I COM5_DSRJ_I COM5_RX_I COM5_RTSJ_I COM5_TX_I COM5_CTSJ_I COM5_DTRJ_I COM5_RI_SEL COM5 Page: 3-5 KS-1130 SERIES USER MANUAL...

  • Page 28: Lan & Usb Ports

    Orange Color Blinking LAN Message Active No LAN Message Active Right Side LAN LED Indicator Green Color On 10/100Mbps LAN Speed Indicator Orange Color On Giga LAN Speed Indicator No LAN switch / hub connected Page: 3-6 KS-1130 SERIES USER MANUAL...

  • Page 29: Usb 3.0 Connectors (Esata, Usb2, Usb3)

    (external Serial Advanced Technology Attachment) is a 7-wire/7-pin technology. The maximum cable length is 6 1/2 feet (2 meters). eSATA and SATA have the same number of wires/pins and their signal formats are the same. Page: 3-7 KS-1130 SERIES USER MANUAL...

  • Page 30: Cash Drawer Port (Drw1)

    Description: DC12V power supply for 2nd display ASSIGNMENT ASSIGNMENT VCC12 VCC12 2nd DIS 3.2.7 Printer Power Port (Option) Port Location: PRINT PWR Description: DC24V power supply for the stand-printer ASSIGNMENT +24V +24V PRINT PWR (Option) Page: 3-8 KS-1130 SERIES USER MANUAL...

  • Page 31: Jumper & Connector Quick Reference Table

    SATA & SATA Power Connector SATA1, SATA2 (option), SATA_PWR1, SATA_PWR2 (option) Touch Panel Connector TOUCH1 Touch Panel and USB9-1 JP18, JP19 Selection LVDS Output Resolution Selection JP8, JP9 Mini-PCIe/mSATA Connector M_PCIE1, M_PCIE2 (option) Mini-PCIe and USB6 Selection JP21 Page: 3-9 KS-1130 SERIES USER MANUAL...
  • Page 32 Chapter 3 System Configuration JUMPER / CONNECTOR NAME EDP Connector (option) Configuration / Recovery JP11 Selection VCCIO / REFIN Selection JP10 Clear CMOS Data Selection JCMOS1 General Purpose Input / Output GPIO1 (GPIO) Connector Audio Jack LINE_OUT1 Page: 3-10 KS-1130 SERIES USER MANUAL...

  • Page 33: Main Board Component Locations & Jumper Settings

    (option) SATA_PWR1 SATA1 SATA2 JP21 SATA_PWR2 PWR_LED M_PCIE1 SYS_FAN1 JP10 GPIO1 I-BUT COM5 USB6 JP19 JP25 JP18 JP26 LVDS JINV1 SPK1 USB7 PS2_1 HDD_LED SPK2 TOUCH1 USB9-1 PB-6980 Front Connector, Jumper and Component Locations Page: 3-11 KS-1130 SERIES USER MANUAL...
  • Page 34 Chapter 3 System Configuration M_PCIE2 PB-6980 Rear Connector, Jumper and Component Locations Page: 3-12 KS-1130 SERIES USER MANUAL...
  • Page 35 Make sure both the system and peripheral devices are turned OFF as sudden surge of power could damage sensitive components. Make sure KS-1130 is properly grounded. CAUTION: Observe precautions while handling electrostatic sensitive components. Make sure to ground yourself to prevent static charge while you are working on the connectors and jumpers.

  • Page 36: How To Set Jumpers

    PIN1 & PIN2 to create one setting by shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 3-14 KS-1130 SERIES USER MANUAL...
  • Page 37 Jumper Block looks like this Jumper Settings 2 pin Jumper close(enabled) Looks like this 3 pin Jumper 2-3 pin close(enabled) Looks like this Jumper Block 1-2 pin close(enabled) Looks like this Page: 3-15 KS-1130 SERIES USER MANUAL...

  • Page 38: Setting Connectors And Jumpers

    The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION (Default) VCC12 Note: Manufacturing Default is RI. 3.2.11.2 i-Button Connector (I-BUT) Connector Location: I-BUT Description: i-Button Connector The pin assignments are as follows: ASSIGNMENT COM3_DTR_R_I I-BUT COM3_RXD_R_I Page: 3-16 KS-1130 SERIES USER MANUAL...
  • Page 39 The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION COM2 (Default) JP22/JP23/JP24 i-Button* JP22/JP23/JP24 Note: Manufacturing Default is COM2. *When these jumpers are set as ‘i-Button’, the COM3_1 connector will not function. Page: 3-17 KS-1130 SERIES USER MANUAL...

  • Page 40: Internal Usb 2.0 Connectors

    USB6 signal is shared from "MINI-PCIE" port. USB9-1 USB6 could be functioned when JP21 are set 1-3, 2-4 [short]. USB9-1 signal is shared from "TOUCH" port. USB9-1 could be functioned when JP18, JP19 are set 1-2 [short]. Page: 3-18 KS-1130 SERIES USER MANUAL...

  • Page 41: Cash Drawer Selection (Jp17)

    Note: Manufacturing Default is Cash Drawer 1. Step 3. DRW1, DRW1-1, DRW1-2 shares the same power source. (Default: 12V). SIO Address Cash drawer 1 LDN 06, 0x91 bit 4 Cash drawer 2 LDN 06, 0x91 bit 5 Page: 3-19 KS-1130 SERIES USER MANUAL...
  • Page 42 To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. Page: 3-20 KS-1130 SERIES USER MANUAL...
  • Page 43 Code example for open the cash drawer 1 ;------ Enter to extended function mode -------------------------------------------------------- ;------ Select Logical Device 6 of Cash drawer -------------------------------------------- ;------ Open the Cash drawer 1 -------------------------------------------- ;------ Exit the extended function mode -------------------------------------------------------- 0aah Page: 3-21 KS-1130 SERIES USER MANUAL...
  • Page 44 Chapter 3 System Configuration ASSIGNMENT ASSIGNMENT +24V Drawer Open Drawer Sense DRW2 Hexadecimal Control Codes Function Codes <DLE EOT> 10 04 Real-time status transmission <DLE DC4> 10 14 Real-time output of the specified pulse Page: 3-22 KS-1130 SERIES USER MANUAL...

  • Page 45: Cash Drawer Power Selection (Jp16)

    Chapter 3 System Configuration 3.2.11.6 Cash Drawer Power Selection (JP16) Jumper Location: JP16 Description: Cash Drawer Power Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION JP16 (Default) JP16 Note: Manufacturing Default is 12V. Page: 3-23 KS-1130 SERIES USER MANUAL...
  • Page 46 Connector Location: PWR_LED Description: Power indication LED Connector The pin assignments are as follows: ASSIGNMENT PWR_LED VCC5 Connector Location: HDD_LED Description: HDD indication LED Connector The pin assignments are as follows: ASSIGNMENT VCC3_3 PCH_SATA_LED_N HDD_LED (option) Page: 3-24 KS-1130 SERIES USER MANUAL...
  • Page 47 System Fan and CPU FAN Connectors (SYS_FAN1, CPU_FAN1) Connector Location: SYS_FAN1 Description: System Fan Connector 1 ASSIGNMENT VCC12 SYS_FANIN SYS_FAN1 SYS_FANOUT Connector Location: CPU_FAN1 Description: CPU Fan Connector 1 ASSIGNMENT VCC12 CPU_FANIN CPU_FANOUT CPU_FAN1 Page: 3-25 KS-1130 SERIES USER MANUAL...

  • Page 48: Power Input Connectors (Pwr_In1, Pwr_In2)

    Connector Location: PWR_IN1 Description: Power Input Connector 1 The pin assignments are as follows: ASSIGNMENT 24VIN 24VIN PWR_IN1 Connector Location: PWR_IN2 Description: Power Input Connector 2 The pin assignments are as follows: ASSIGNMENT 24VIN 24VIN PWR_IN2 Page: 3-26 KS-1130 SERIES USER MANUAL...

  • Page 49: Power Connectors (Dc24V, Dc12V, Dc5V)

    Description: DC 12Voltage Provider Connector The pin assignments are as follows: ASSIGNMENT VCC12_GT DC12V Connector Location: DC5V Description: DC 5Voltage Provider Connector DC5V: DC 5Voltage Provider Connector The pin assignments are as follows: ASSIGNMENT V_5P0_A DC5V Page: 3-27 KS-1130 SERIES USER MANUAL...

  • Page 50: Power Switch Connectors (Sw1, Sw2)

    3.2.11.11 Power Switch Connectors (SW1, SW2) Connector Location: SW1 Description: Power Switch Connector 1 The pin assignments are as follows: ASSIGNMENT LPC_PWRBTNJ (option) Connector Location: SW2 Description: Power Switch Connector 2 The pin assignments are as follows: ASSIGNMENT LPC_PWRBTNJ Page: 3-28 KS-1130 SERIES USER MANUAL...

  • Page 51: External Speaker Connectors (Spk1, Spk2)

    Description: External Speaker Connector 1 The pin assignments are as follows: PIN ASSIGNMENT HD_FRONT-OUT1-R SPK1/ HD_FRONT-OUT1-L SPK2 (option) Connector Location: SPK2 Description: External Speaker Connector 2 The pin assignments are as follows: PIN ASSIGNMENT HD_FRONT-OUT2-R HD_FRONT-OUT2-L Page: 3-29 KS-1130 SERIES USER MANUAL...

  • Page 52: Speaker Selection (Jp13)

    Chapter 3 System Configuration 3.2.11.13 Speaker Selection (JP13) Jumper Location: JP13 Description: SPK1/SPK2 Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION SPK1&SPK2 JP13 (Default) Only SPK1 Open JP13 Note: Manufacturing Default is SPK1&SPK2. Page: 3-30 KS-1130 SERIES USER MANUAL...

  • Page 53: Inverter Connector (Jinv1)

    Chapter 3 System Configuration 3.2.11.14 Inverter Connector (JINV1) Connector Location: JINV1 Description: Inverter Connector The pin assignments are as follows: PIN ASSIGNMENT JINV1 VCC12 VCC12 VCC12 LED_PWM PANLE_BKLTEN Page: 3-31 KS-1130 SERIES USER MANUAL...

  • Page 54: Lvds Connector (Lvds1)

    Connector Location: LVDS1 Description: LVDS Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT LVDS_VCC LVDS_CLKAP LVDS_CLKAM LVDS_CLKBM LVDS_CLKBP LVDS_YAP2 LVDS_YAM2 LVDS_YBM2 LVDS_YBP2 LVDS_YAP1 LVDS_YBM1 LVDS_YBP1 LVDS_YAP0 LVDS_YBP3 LVDS_YAM0 LVDS_YBM3 LVDS_YAP3 LVDS_YBP0 LVDS_YAM3 LVDS_YBM0 LVDS_VCC LVDS_VCC Page: 3-32 KS-1130 SERIES USER MANUAL...

  • Page 55: Lvds Power Selection (Jp25)

    3.2.11.16 LVDS Power Selection (JP25) Jumper Location: JP25 Description: LVDS Panel Power Input Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION 3.3V (Default) JP25 JP25 Note: Manufacturing Default is 3.3V. Page: 3-33 KS-1130 SERIES USER MANUAL...

  • Page 56: Lvds Backlight Type Selection (Jp26)

    3.2.11.17 LVDS Backlight Type Selection (JP26) Jumper Location: JP26 Description: LVDS Backlight Type Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION 3.3V JP26 (Default) JP26 Note: Manufacturing Default is 3.3V. Page: 3-34 KS-1130 SERIES USER MANUAL...

  • Page 57: Msr/Card Reader Connector (Ps2_1)

    Chapter 3 System Configuration 3.2.11.18 MSR/Card Reader Connector (PS2_1) Connector Location: PS2_1 Description: MSR/Card Reader Connector The pin assignments are as follows: PIN ASSIGNMENT KCLK_KB (Output) PS2_1 KCLK_C (Input) KDAT_C (Input) KDAT_KB (Output) Page: 3-35 KS-1130 SERIES USER MANUAL...

  • Page 58: Sata & Sata Power Connectors

    Description: Serial ATA Connectors The pin assignments are as follows: SATA1/ PIN ASSIGNMENT SATA2 (option) Connector Location: SATA_PWR1, SATA_PWR2 (option) Description: Serial ATA Power Connectors The pin assignments are as follows: PIN ASSIGNMENT VCC12 SATA_PWR1 SATA_PWR2 (option) Page: 3-36 KS-1130 SERIES USER MANUAL...

  • Page 59: 3.2.11.20 Touch Panel Connector

    Chapter 3 System Configuration 3.2.11.20 Touch Panel Connector Connector Location: TOUCH1 Description: Touch Panel Connector The pin assignments are as follows: PIN ASSIGNMENT TOUCH1 Page: 3-37 KS-1130 SERIES USER MANUAL...

  • Page 60: Touch Panel & Usb9-1 Selection (Jp18, Jp19)

    Description: Touch Panel and USB9-1 Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION USB9-1 Connector (Capacitor Panel JP18/JP19 Selection) Touch Interface (Resistor Panel Selection) JP18/JP19 (Default) Note: Manufacturing Default is Touch interface. Page: 3-38 KS-1130 SERIES USER MANUAL...
  • Page 61 SETTING JP8 (3-5) 1024x768 JP8 (2-4) (24 bit) JP9 (3-5) JP9 (4-6) JP8 (1-3) 1024x768 JP8 (4-6) (18 bit) JP9 (3-5) JP9 (4-6) JP8 (3-5) 800x600 JP8 (4-6) (18 bit) JP9 (3-5) JP9 (4-6) Page: 3-39 KS-1130 SERIES USER MANUAL...

  • Page 62: Mini-Pcie/Msata Connector

    M_PCIE2 Reserved PETn2 (option) +1.5V SMB_DATA CLKREQ# PETp2 Reserved Reserved USB D- REFCLK1- Reserved USB D+ REFCLK1+ +3.3V Reserved +3.3V Reserved Reserved Reserved Reserved Reserved Reserved Reserved PERST# +1.5V PERn0 +3.3SB PERp0 Reserved +3.3V KS-1130 SERIES USER MANUAL Page: 3-40...

  • Page 63: Mini-Pcie And Usb6 Selection (Jp21)

    Description: Mini-PCIe and USB6 Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION USB signal to 1-3, 2-4 USB6 wafer JP21 USB6 (Disabled) signal to 3-5, 4-6 mini-PCIe (Default) JP21 *Note: Manufacturing Default is USB6 (Disabled) signal to mini-PCIe. Page: 3-41 KS-1130 SERIES USER MANUAL...

  • Page 64: Embedded Displayport (Edp) Connector (Edp)

    It has advanced power-saving features including seamless refresh rate switching. It has become the new mainstream display panel interface for LCD panels with the realized higher resolution. Page: 3-42 KS-1130 SERIES USER MANUAL...

  • Page 65: Configuration / Recovery Selectioin (Jp11)

    Chapter 3 System Configuration 3.2.11.26 Configuration / Recovery Selectioin (JP11) Jumper Location: JP11 Description: Configuration / Recovery Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION Normal (Default) JP11 Configure JP11 Recovery Open JP11 Page: 3-43 KS-1130 SERIES USER MANUAL...

  • Page 66: Vccio / Refin Selection (Jp10)

    3.2.11.27 VCCIO / REFIN Selection (JP10) Jumper Location: JP10 Description: VCCIO / Refin Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION 1.0V JP10 (Default) 0.95V JP10 1.0V Open JP10 Note: Manufacturing Default is 1.0V. Page: 3-44 KS-1130 SERIES USER MANUAL...

  • Page 67: Clear Cmos Data Selection (Jcmos1)

    Step 4. Power on the PC and the PC will then auto-reboot for once in order to set SoC’s register. Step 5. Done! JUMPTER SELECTION JUMPER ILLUSTRATION SETTING Normal Open (Default) JCMOS1 Clear CMOS Data JCMOS1 Note: Manufacturing Default is Normal. Page: 3-45 KS-1130 SERIES USER MANUAL...

  • Page 68: Gpio Connector (Gpio1)

    The pin assignments are as follows: ASSIGNMENT 3.3V(Maximum current: 0.5A) GPIO GPIO1 3.2.13 Audio Jack (LINE_OUT1) Connector Location: LINE_OUT1 Description: External audio phone jack port The pin assignments are as follows: ASSIGNMENT HD_GND LINE-OUT-R VCC_AUD LINE-OUT-L LINE_OUT1 Page: 3-46 KS-1130 SERIES USER MANUAL...

  • Page 69: Ks-1130 Entry Level System Main Board

    Chapter 3 System Configuration KS-1130 Entry Level System Main Board 3.3.1 DC-IN Port (DC-IN) Port Location: DC-IN Description: DC Power-In Port (rear IO) PIN ASSIGNMENT PIN ASSIGNMENT +24V +24V DC-IN 3.3.2 VGA Port (VGA) Port Location: VGA Description: VGA Port, D-Sub 15-pin (rear I/O)

  • Page 70: Com Ports (Com1, Com2, Com3)

    Left Side LED Yellow Color Blinking LAN Message Active No LAN Message Active Right Side LED Green Color On 10/100Mbps LAN Speed Indicator Orange Color on Giga LAN Speed Indicator No LAN switch/ hub connected. Page: 3-48 KS-1130 SERIES USER MANUAL...

  • Page 71: Cash Drawer Port (Dwr1, Dwr1-1, Dwr1-2)

    Port Location: 2-DISPWR Description: Second Display Power port (Rear I/O) ASSIGNMENT +12V 2-DISPWR +12V 3.3.7 RAID Power Port (Optional) (RAID PWR) Port Location: RAID PWR Description: RAID Power port (Rear I/O) ASSIGNMENT RAID PWR Page: 3-49 KS-1130 SERIES USER MANUAL...

  • Page 72: Usb Ports (Usb0-Usb4)

    : Side I/O ASSIGNMENT ASSIGNMENT (Max. current: 0.5A) USB2/ USB1/ USB0 USB3 USB4 3.3.9 Printer Power Port (Optional) (PRT PWR) Port Location: PRT PWR Description: Printer Power port (rear I/O) ASSIGNMENT +24V PRT PWR Page: 3-50 KS-1130 SERIES USER MANUAL...

  • Page 73: Ups Power Port (Optional) (Ups)

    Chapter 3 System Configuration 3.3.10 UPS Power Port (Optional) (UPS) Port Location: UPS Description: UPS Power port (Rear I/O) ASSIGNMENT +24V +24V Page: 3-51 KS-1130 SERIES USER MANUAL...

  • Page 74: Mainboard Component Locations & Jumper

    Chapter 3 System Configuration 3.3.11 MAINBOARD COMPONENT LOCATIONS & JUMPER SETTINGS M/B: PB-6822 PB-6822 Main Board Component Locations Page: 3-52 KS-1130 SERIES USER MANUAL...

  • Page 75: How To Set Jumpers

    PIN1 & PIN2 to create one setting and shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 3-53 KS-1130 SERIES USER MANUAL...
  • Page 76 Chapter 3 System Configuration Jumper Diagrams Jumper Settings Page: 3-54 KS-1130 SERIES USER MANUAL...

  • Page 77: Setting Connectors And Jumpers

    The voltage of COM port is adjustable by BIOS or jumpers. You can select to adjust the voltage of COM ports either through BIOS or by setting jumpers. DO NOT use these two methods at the same time in case of system error, component damage or serious boot failure. KS-1130 SERIES USER MANUAL Page: 3-55...
  • Page 78 Note: Each COM connector is RI/+5V/+12V selectable. Refer to the COM Port RI & Voltage Selection section for details. COM4_2/ 3.3.13.3 i-Button Connector (JI_BUTTON1) Connector Location: JI_BUTTON1 Description: i-Button Connector ASSIGNMENT COM3_DTR_R_I COM3_RXD_R_I JI_BUTTON1 Page: 3-56 KS-1130 SERIES USER MANUAL...
  • Page 79 Jumper Location: JP20, JP21, JP22 Description: i-Button Function selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION COM3 (Default) JP20/JP21/JP22/ i-Button* JP20/JP21/JP22/ *COM3 & COM3_1 will not function when jumpers JP20, JP21 & JP22 are set as “i-Button.” Page: 3-57 KS-1130 SERIES USER MANUAL...

  • Page 80: Cash Drawer Control Selection (Jp37)

    Method 2: You can split DWR1 into two channels of DWR1-1 & DWR1-2 by using the Y-Cable (option). JP37: Cash Drawer control connector SELECTION JUMPER SETTING JUMPER ILLUSTRATION DWR1-1 & DWR1-2 JP37 GND (Default) JP37 Page: 3-58 KS-1130 SERIES USER MANUAL...
  • Page 81 Cash drawer 1-2 Cash Drawer Sensor Control: Drawer 1-1 Control LDN 06, 0x91 bit 1 Drawer1-1 Sensor LDN 06, 0xF2 bit 5 Drawer1-2 Control LDN 06, 0x91 bit 3 Drawer1-2 Sensor LDN 06, 0xF2 bit 6 Page: 3-59 KS-1130 SERIES USER MANUAL...
  • Page 82 To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. Page: 3-60 KS-1130 SERIES USER MANUAL...
  • Page 83 ;---------------------- Select Logical Device 6 of Cash drawer ---------------------------- ;------------------------------------ Open Cash drawer 1-1 ------------------------------------ ;------------------------------------ Close Cash drawer 1-1 ----------------------------------- ;------------------------------------ Open Cash drawer 1-2 ------------------------------------ ;------------------------------------ Close Cash drawer 1-2 ----------------------------------- ;-------------------------------- Exit the extended function m-------------------------------- 0aah Page: 3-61 KS-1130 SERIES USER MANUAL...

  • Page 84: Cash Drawer Power Selection (Jp29)

    COM ports either through BIOS or by setting jumpers. DO NOT use these two methods at the same time in case of system error, component damage or serious boot failure. Page: 3-62 KS-1130 SERIES USER MANUAL...

  • Page 85: Usb Connectors (Usb1, Usb2, Usb6, Usb7)

    USB6 3.3.13.8 LED Connector (LED1_1) Connector Location: LED1_1 Description: Power LED connector ASSIGNMENT LED1_1/ 3.3.13.9 Power for Thermal Printer Connector (PRT_PWR1) Connector Location: PRT_PWR1 Description: Power for Thermal Printer Connector ASSIGNMENT VCC24SB VCC24SB PRT_PWR1 Page: 3-63 KS-1130 SERIES USER MANUAL...

  • Page 86: Power Connectors

    3.3.13.11 External Speaker Connectors (SPK1, SPK2) Connector Location: SPK1, SPK2 Description: External Speaker Connector ASSIGNMENT SPK_GND SPK1/ SPK_OUT SPK2 3.3.13.12 Inverter Connectors (JINV2, JINV3) Connector Location: JINV2, JINV3 Description: Inverter connectors ASSIGNMENT +12V JINV2 / +12V JINV3/ BRCTR LVDS_BKLTEN Page: 3-64 KS-1130 SERIES USER MANUAL...

  • Page 87: Power Button Connector (Sw1_2)

    1-3, 2-4 Control by driver It is applied to the panel on M/B without the driver built-in. JP12 3-5, 4-6 Control by It is applied to the panel with the built-in driver (Default) inside. JP12 Page: 3-65 KS-1130 SERIES USER MANUAL...

  • Page 88: Led Backlight Power Connector (Jinvdrv1)

    JP8: 3-5, 2-4 1024 x 768 JP9:3-5, 4-6 (18 bit) 10.4” JP8: 3-5, 4-6 800 x 600 JP9: 3-5, 4-6 (18bit) 17” JP8: 1-3, 4-6 1280 x 1024 (24bit Dual) JP9: 1-3, 4-6 (Default) Page: 3-66 KS-1130 SERIES USER MANUAL...

  • Page 89: Lvds Connector (Lvds1)

    LVDS_A3_D+ LVDS_A3_D- LVDS_VCC LVDS_VCC 3.3.13.18 Touch Panel Connectors (TOUCH1, TOUCH2) Connector Location: TOUCH1, TOUCH2 Description: Touch panel connectors ASSIGNMENT LR (Low Right) LL (Low Left) Probe UR (Up Right) TOUCH1 UL (Up Left) TOUCH2 Page: 3-67 KS-1130 SERIES USER MANUAL...

  • Page 90: Touch Panel Signal Interface Selection

    JP39: 2-3 JP14: 1-2 RS-232 JP15: 1-2 Interface JP38: 1-2 JP14 JP15 JP38 JP39 JP39: 1-2 Notes: The COM2 & COM2_1 connectors will not function when JP38 & JP39 are set as 1-2 connected. Page: 3-68 KS-1130 SERIES USER MANUAL...

  • Page 91: Clear Cmos Data Selection (Jp3)

    “Clear CMOS” as shown above. After five to six seconds, set the jumper back to “Normal” and power on the computer. 3.3.13.21 MSR/Card Reader Connectors (PS/2_1, PS/2_2) Connector Location: PS/2_1, PS/2_2 Description: MSR/Card reader connectors ASSIGNMENT KB_CLK (Output) KB_CLK_C (Input) PS/2_1 KB_DATA_C (Input) KB_DATA (Output) PS/2_2 Page: 3-69 KS-1130 SERIES USER MANUAL...
  • Page 92 SATA2/ Note: SATA1 only supports the optional RAID function on board. Connector Location: JPWR_4P1, JPWR_4P2 Description: Serial ATA power connectors ASSIGNMENT JPWR_4P1/ JPWR_4P2/ VCC12 Note: JPWR_4P1 only supports the optional RAID function on board Page: 3-70 KS-1130 SERIES USER MANUAL...

  • Page 93: Printer Connector (Lpt1)

    Chapter 3 System Configuration 3.3.13.23 Printer Connector (LPT1) LPT1 Connector Location: LPT1 Description: Printer connector ASSIGNMENT ASSIGNMENT STBJ ALFJ PDR0 ERRJ PDR1 PAR_INITJ PDR2 SLCTINJ PDR3 PDR4 PDR5 PDR6 PDR7 ACKJ BUSY SLCTJ Page: 3-71 KS-1130 SERIES USER MANUAL...

  • Page 94: Mini-Pcie Connector (Slot1)

    WAKE# +3.3V Reserved Reserved +1.5V SLOT1 CLKREQ# Reserved Reserved REFCLK1- Reserved REFCLK1+ Reserved Reserved Reserved Reserved Reserved PERST# PERn2 +3.3SB PERp2 +1.5V SMB_CLK PETn2 SMB_DATA PETp2 +3.3V +3.3V Reserved Reserved Reserved +1.5V Reserved +3.3V Page: 3-72 KS-1130 SERIES USER MANUAL...

  • Page 95: Software Utilities

    Installing Microsoft Hotfix kb3211320 and kb3213986 Driver Utility Entry Level System: • ® Installing Intel Chipset Software Installation Utility • Installing VGA Driver Utility • Installing LAN Driver Utility • Installing Sound Driver Utility • Installing Wireless Module Driver Utility (Optional) KS-1130 SERIES USER MANUAL Page: 4-1...

  • Page 96: Introduction

    Chapter 4 Software Utilities Introduction Enclosed with the KS-1130 Series package is our driver utilities contained in a DVD-ROM disk. Refer to the following table for driver locations. 4.1.1 Driver and OS Support For High-End Level System The driver utilities listed below are to be installed only for Windows 10 (32/64-bit), Windows 7 (32/64-bit), POSReady7 (32/64-bit) series.

  • Page 97: Intel ® Chipset Software Installation Utility

    (32/64-bit), POSReady7 (32/64-bit) series, and it should be installed right after the OS installation. Please follow the steps below: Connect the USB DVD-ROM device to KS-1130 and insert the driver disk inside. Enter the “Main Chip” folder where the Chipset driver is located (depending on your OS platform).

  • Page 98: Vga Driver Utility

    Chapter 4 Software Utilities 4.1.1.2 VGA Driver Utility The VGA interface embedded with the KS-1130 series can support a wide range of display types. You can have dual displays via CRT and LVDS interfaces work simultaneously. Installation of VGA Driver...

  • Page 99: Lan Driver Utility

    4.1.1.3 LAN Driver Utility The KS-1130 Series is enhanced with LAN function that can support various network adapters. Installation platform for the LAN driver is listed as follows: For more details on the Installation procedure, please refer to the Readme.txt file found on LAN Driver Utility.

  • Page 100: Sound Driver Utility

    To install the Sound Driver, refer to the readme.txt file on the driver disc (:\Sound\Realtek\Readme.txt). Connect the USB DVD-ROM device to KS-1130 and insert the driver disk inside. Enter the “Sound” folder where the Sound driver is located (depending on your OS platform).

  • Page 101: Touchscreen Driver Utility

    OS installation. Installation of Touchscreen Driver To install the Touchscreen Driver, follow the steps below: Connect the USB DVD-ROM device to KS-1130 and insert the driver disk inside. Enter the “Device/Touchscreen” folder where the Touchscreen Driver is located.

  • Page 102: Fingerprint Driver Utility (Optional)

    OS installation is completed. Installing Fingerprint Driver To install the fingerprint driver, follow the steps below: Connect the USB DVD-ROM device to KS-1130 and insert the driver disk. Open the “Device\Embedded Finger Printer” folder where the fingerprint driver is located.

  • Page 103: Driver And Os Support For Entry Level System

    Intel TXE Firmware Driver WIN10 (32bit-64bit) Driver installation for Barcode    D:\Driver\Device Scanner, MSR, Printer, etc. X : Not support : Support Note: Install the driver utilities immediately after the OS installation is completed. KS-1130 SERIES USER MANUAL Page: 4-9...

  • Page 104: Intel ® Chipset Software Installation Utility

    (32/64-bit), POSReady7 (32/64-bit) series, and it should be installed right after the OS installation. Please follow the steps below: Connect the USB DVD-ROM device to KS-1130 and insert the driver disk. Enter the “Main Chip” folder where the Chipset driver is located (depending on your OS platform).

  • Page 105: Vga Driver Utility

    4.1.2.2 VGA Driver Utility To install the Graphics driver, follow the steps below: Connect the USB-DVD ROM device to KS-1130 and insert the driver disk. Enter the “VGA” folder where the VGA driver is located (depending on your OS platform).

  • Page 106: Sound Driver Utility

    Sound driver. To install the Sound Driver, follow the steps below: Connect the USB DVD-ROM device to KS-1130 and insert the driver disk. Enter the “Sound” folder where the sound driver is located (depending on your OS platform).

  • Page 107: Bios Setup

    The BIOS Setup Utilities consist of the following menu items: • Accessing Setup Utilities • Main Menu • Advanced Menu • Chipset Menu • Security Menu • Boot Menu • Save & Exit Menu KS-1130 SERIES USER MANUAL Page: 5-1...

  • Page 108: Introduction

    Chapter 5 BIOS Setup Introduction The KS-1130 uses an AMI (American Megatrends Incorporated) Aptio BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated. The SPI Flash contains the built-in BIOS setup program, Power-On Self-Test (POST), PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.

  • Page 109: Accessing Setup Utility For High-End Level System

    POST message will be displayed: POST Screen with AMI Logo Press <Del> or <Esc> to access the Setup Utility program and the Main menu of the Aptio Setup Utility will appear on the screen as below: KS-1130 SERIES USER MANUAL Page: 5-3...
  • Page 110 English. You may use <↑> or <↓> key to select among the items and press <Enter> to confirm and enter the sub-menu. The following table provides the list of the navigation keys that you can use while operating the BIOS setup menu. KS-1130 SERIES USER MANUAL Page: 5-4...
  • Page 111 Load the previous configuration values. <F3> Load the default configuration values. <F4> Save the current values and exit the BIOS setup menu. <Esc> Close the sub-menu. Trigger the confirmation to exit BIOS setup menu. KS-1130 SERIES USER MANUAL Page: 5-5...

  • Page 112: Main

    Displays the date of the current BIOS Time version. System Date month, day, year Set the current date. The “Day” is automatically changed. System Time hour, minute, second Set the clock of the system. KS-1130 SERIES USER MANUAL Page: 5-6...

  • Page 113: Advanced

    System ACPI Parameters. F81866 Super IO Configuration Sub-Menu System Super IO Chip Parameters Hardware Monitor Sub-Menu Monitor hardware status F81866 Watchdog Sub-Menu F81866 Watchdog Parameters. S5 RTC Wake Settings Sub-Menu S5 RTC Wake Settings KS-1130 SERIES USER MANUAL Page: 5-7...

  • Page 114: Advanced - Cpu Configuration

    Network Stack Settings USB Configuration Sub-Menu USB Configuration Parameters. 5.2.2.1 Advanced - CPU Configuration Menu Path Advanced > CPU Configuration The CPU Configuration provides advanced CPU settings and some information about CPU. CPU Configuration Screen KS-1130 SERIES USER MANUAL Page: 5-8...
  • Page 115 - 1 to n (depend on CPU) processor package. Intel Virtualization - Disabled When enabled, a VMM (Virtual Technology - Enabled Machine Monitor) can utilize the additional hardware capabilities provided by Vanderpool Technology (VT). KS-1130 SERIES USER MANUAL Page: 5-9...

  • Page 116: Advanced - Sata Configuration (Ahci Mode)

    No changeable options Displays the SATA device’s name. External SATA Port 1 Software Preserve No changeable options Displays if Software Preserve support. - Disabled Port 1 - 2 Enables or Disables SATA Port Device. - Enabled KS-1130 SERIES USER MANUAL Page: 5-10...
  • Page 117 No changeable options Displays if Software Preserve support. - Disabled Port 1 - 2 Enables or Disables SATA Port Device. - Enabled - Disabled Enables or Disables SATA Port Device HotPlug - Enabled HotPlug function. KS-1130 SERIES USER MANUAL Page: 5-11...

  • Page 118: Advanced - Pch-Fw Configuration

    Description/Purpose ME FW Version No changeable options Displays the ME Firmware Version. ME Firmware Mode No changeable options Displays the ME Firmware Mode. ME Firmware SKU No changeable options Displays the ME Firmware SKU. KS-1130 SERIES USER MANUAL Page: 5-12...

  • Page 119: Advanced - Acpi Settings

    - S3 (Suspend to RAM) button is pressed. - Disabled Enables or Disables Lock of Legacy Lock Legacy Resources - Enabled Resources. - Disabled S3 Video Repost Enables or Disables S3 Video Repost. - Enabled KS-1130 SERIES USER MANUAL Page: 5-13...

  • Page 120: Advanced >F81866 Super Io Configuration

    Serial Port 3 Configuration Sub-menu Set Parameters of Serial Port 3 (COMC) Serial Port 4 Configuration Sub-menu Set Parameters of Serial Port 4 (COMD) Serial Port 5 Configuration Sub-menu Set Parameters of Serial Port 5 (COME) KS-1130 SERIES USER MANUAL Page: 5-14...
  • Page 121 Displays the current settings of Serial Port 1. Change Settings - Auto Selects IRQ and I/O - IO=3F8h; IRQ=4; resource setting for Serial - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; Port 1. - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; KS-1130 SERIES USER MANUAL Page: 5-15...
  • Page 122 Displays the current settings of Serial Port 2. Change Settings - Auto Selects IRQ and I/O - IO=2F8h; IRQ=3; resource setting for Serial - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; Port 2. - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; KS-1130 SERIES USER MANUAL Page: 5-16...
  • Page 123 Displays the current settings of Serial Port 3. Change Settings - Auto Selects IRQ and I/O - IO=3E8h; IRQ=7; resource setting for Serial - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; Port 3. - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; KS-1130 SERIES USER MANUAL Page: 5-17...
  • Page 124 Displays the current settings of Serial Port 4. Change Settings - Auto Selects IRQ and I/O - IO=2E8h; IRQ=10; resource setting for Serial - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; Port 4. - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; KS-1130 SERIES USER MANUAL Page: 5-18...
  • Page 125 Displays the current settings of Serial Port 5. Change Settings - Auto Select IRQ and I/O resource - IO=2F0h; IRQ=6; setting for Serial Port 5. - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; - IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; KS-1130 SERIES USER MANUAL Page: 5-19...

  • Page 126: Advanced >Hardware Monitor

    System Fan Speed No changeable options Displays the System Fan speed. VCORE No changeable options Displays the voltage level of VCORE in supply. VSB5V No changeable options Displays the voltage level of VSB5V in supply. KS-1130 SERIES USER MANUAL Page: 5-20...
  • Page 127 Numeric (from 1 to 100) expected duty cycle (PWM fan type) from 1 to 100. System Fan Smart Fan - Manual Duty Mode Smart Fan Mode selection for System Fan. Control - Auto Duty-Cycle Mode KS-1130 SERIES USER MANUAL Page: 5-21...

  • Page 128: Advanced - F81866 Watchdog Configuration

    Selects 1s (second) or 60s (minute) as - 60s the time unit of Watchdog timer. Count for Timer (Seconds) Numeric (from 1 to 255) Sets the timeout for Watchdog timer. (Max. value: 255 seconds or minutes) KS-1130 SERIES USER MANUAL Page: 5-22...

  • Page 129: Advanced >S5 Rtc Wake Settings

    3 for 3 a.m. and 15 for 3 pm Wake up minute Numeric (from 0 to 59) Enters 0-59 to set the wake-up minute. Wake up second Numeric (from 0 to 59) Enters 0-59 to set the wake-up second. KS-1130 SERIES USER MANUAL Page: 5-23...

  • Page 130: Advanced - Network Stack Configuration

    NIC to the LAN via a jumper, which keeps the workstation connected to the network even when the power is turned off. Network Stack Configuration Screen BIOS Setting Options Description/Purpose - Disabled Network Stack Enables or Disables UEFI Network Stack. - Enabled KS-1130 SERIES USER MANUAL Page: 5-24...

  • Page 131: Advanced >Usb Configuration

    Numeric (from 1 to 50) media will be checked. 5.2.2.10 Advanced - USB Configuration Menu Path Advanced >USB Configuration The USB Configuration allows users to configure advanced USB settings such as Legacy USB support. USB Configuration Screen KS-1130 SERIES USER MANUAL Page: 5-25...
  • Page 132 Chapter 5 BIOS Setup BIOS Setting Options Description/Purpose - Disabled Sets to “Enabled” if you want to use USB Legacy USB Support - Enabled device in the legacy operating system. - Auto KS-1130 SERIES USER MANUAL Page: 5-26...

  • Page 133: Chipset

    This menu allows users to configure advanced Chipset settings such as System Agent (SA) and PCH-IO configuration parameters. Chipset Screen BIOS Setting Options Description/Purpose System Agent (SA) Parameters Sub-menu System Agent (SA) Parameters. PCH-IO Configuration Sub-menu PCH Parameters. KS-1130 SERIES USER MANUAL Page: 5-27...

  • Page 134: Chipset - System Agent (Sa) Configuration

    I/O devices in virtualized environment. - Disabled VT-d Enables or Disables VT-d function. - Enabled KS-1130 SERIES USER MANUAL Page: 5-28...
  • Page 135 Displays the Frequency of Memory. Total Memory No changeable options Displays the Total Memory. Memory Timings No changeable options Displays the Memory (RAM) timings (tCL-tRCD-tRP-tRAS) and latency. • CAS Latency (tCL) - This is the KS-1130 SERIES USER MANUAL Page: 5-29...
  • Page 136 (tRAS = tCL + tRCD + tRP). SO-DIMM#1 No changeable options Displays the size of SO-DIMM#1. SO-DIMM#2 No changeable options Displays the size of SO-DIMM#2. KS-1130 SERIES USER MANUAL Page: 5-30...
  • Page 137 No changeable options Displays the IGFX VBIOS Version. LCD Control Sub-menu LCD Control sub-menu. Controls the LVDS backlight LVDS Backlight Control Numeric (from 10 to 100) brightness ranging from 10 to 100 in scale. KS-1130 SERIES USER MANUAL Page: 5-31...
  • Page 138 LCD Control Screen BIOS Setting Options Description/Purpose - VBIOS default Primary IGFX Boot - VGA Selects Primary Display Device Display - LVDS - Disabled Secondary IGFX - VGA Selects Secondary Display Device Boot Display - LVDS KS-1130 SERIES USER MANUAL Page: 5-32...

  • Page 139: Chipset - Pch-Io Configuration

    Sub-menu PCI Express Configuration settings. - Disabled PCH LAN Controller Enables or Disables onboard NIC. - Enabled - Disabled Enables or Disables integrated LAN Wake on LAN Enable - Enabled to wake the system. KS-1130 SERIES USER MANUAL Page: 5-33...
  • Page 140 PCIe-USB Glitch W/A for bad USB - Enabled devices(s) connected behind PCIE/PEG Port. Mini PCI Express Port 1 Sub-menu Mini PCI Express Port 1 Settings. Mini PCI Express Port 2 Sub-menu Mini PCI Express Port 2 Settings. KS-1130 SERIES USER MANUAL Page: 5-34...
  • Page 141 PCI Express L1 Substates settings. - L1.1 - L1.2 - L1.1 & L1.2 - Disabled Enables or Disables PCI Express Hot Plug - Enabled Hot Plug. - Auto Selects PCI Express Port Speed. PCIe Speed - Gen1 KS-1130 SERIES USER MANUAL Page: 5-35...
  • Page 142 Management) Level. The option - L1 allows users to set lower power - L0sL1 mode that activates when the bus is - Auto not being used. L1 Substates - Disabled PCI Express L1 Substates settings. - L1.1 KS-1130 SERIES USER MANUAL Page: 5-36...
  • Page 143 - Auto Selects PCI Express Port Speed. - Gen1 - Gen2 - Gen3 Detect Non-Compliance Device Detects Non-Compliance PCI - Disabled Express Device. If enable, it will - Enabled take more time at POST time. KS-1130 SERIES USER MANUAL Page: 5-37...

  • Page 144: Security

    Setup utility. Security Screen BIOS Setting Options Description/Purpose Password can be 3-20 Specifies the administrator Administrator Password alphanumeric characters. password. Password can be 3-20 User Password Specifies the user password. alphanumeric characters. KS-1130 SERIES USER MANUAL Page: 5-38...

  • Page 145: Boot

    • On: Enables the NumLock function automatically after the - On Bootup NumLock State system is powered on. - Off • Off: Disables the NumLock function after the system is powered on. KS-1130 SERIES USER MANUAL Page: 5-39...
  • Page 146 Boot Option #1~#n Sets the system boot order. - Disabled Allows users to select boot order of Hard Drive BBS Priorities Sub-Menu available drive(s) CSM configuration: Enable/Disable, CSM Configuration Sub-Menu Option ROM execution settings, etc. KS-1130 SERIES USER MANUAL Page: 5-40...

  • Page 147: Boot - Hard Drive Bbs Priorities

    Select Hard Drive BBS Priorities from the Boot menu to configure the boot sequence and priority of the available drives. Hard Drive BBS Priorities Screen BIOS Setting Options Description/Purpose - [Drive(s)] Sets the system boot order for hard Boot Option #1~#n - Enabled drive. KS-1130 SERIES USER MANUAL Page: 5-41...

  • Page 148: Boot - Csm Configuration

    - Do not launch Controls the execution of UEFI and Network - UEFI Legacy PXE OpROM. - Legacy - Do not launch Controls the execution of UEFI and Storage - UEFI Legacy Storage OpROM. - Legacy KS-1130 SERIES USER MANUAL Page: 5-42...
  • Page 149 Controls the execution of UEFI and Video - UEFI Legacy Video OpROM. - Legacy - Do not launch Determines OpROM execution Other PCI devices - UEFI policy for devices other than - Legacy Network, Storage or Video. KS-1130 SERIES USER MANUAL Page: 5-43...

  • Page 150: Save & Exit

    Discard Changes and Reset to discard any changes you have made and restore the factory BIOS defaults. Load User Defaults You may simply press F3 at any time to load the Optimized Values which resets all BIOS settings to the factory defaults. Save & Exit Screen KS-1130 SERIES USER MANUAL Page: 5-44...
  • Page 151 Save the changes done so far as User Save as User Defaults No changeable options Defaults. Restore the User Defaults to all the Restore User Defaults No changeable options setup options. Forces to boot from selected Boot Override - [Drive(s)] [drive(s)]. KS-1130 SERIES USER MANUAL Page: 5-45...

  • Page 152: Accessing Setup Utility For Entry Level System

    POST message will be displayed: POST Screen with AMI Logo Press <Del> or <Esc> to access the Setup Utility program and the Main menu of the Aptio Setup Utility will appear on the screen as below: KS-1130 SERIES USER MANUAL Page: 5-46...
  • Page 153 English. You may use <↑> or <↓> key to select among the items and press <Enter> to confirm and enter the sub-menu. The following table provides the list of the navigation keys that you can use while operating the BIOS setup menu. KS-1130 SERIES USER MANUAL Page: 5-47...
  • Page 154 Load the previous configuration values. <F3> Load the default configuration values. <F4> Save the current values and exit the BIOS setup menu. <Esc> Close the sub-menu. Trigger the confirmation to exit BIOS setup menu. KS-1130 SERIES USER MANUAL Page: 5-48...

  • Page 155: Main

    No changeable options Displays the date of current BIOS version. Time Sec RC Version No changeable options Displays the current Sec RC version. TXE FW No changeable options Displays the current TXE Version Version KS-1130 SERIES USER MANUAL Page: 5-49...
  • Page 156 Chapter 5 BIOS Setup BIOS Setting Options Description/Purpose System English BIOS Setup language. Language System Date month, day, year Specifies the current date. System Time hour, minute, second Specifies the current time. KS-1130 SERIES USER MANUAL Page: 5-50...

  • Page 157: Advanced

    OS Selection Voltage/RI Adjust Sub-Menu Voltage/RI Adjust settings. Configuration CSM Configuration Sub-Menu Configure Option ROM execution, boot options filters, etc.. USB Configuration Sub-Menu USB Configuration Parameters. SIO Configuration Sub-Menu System Super IO Chip Configuration. KS-1130 SERIES USER MANUAL Page: 5-51...

  • Page 158: Advanced - Acpi Settings

     Suspend Disabled disables ACPI sleep State - S3 Only (Suspend to RAM) feature.  S3 allows the platform to enter suspend to RAM mode. Lock Legacy - Disabled Enables or Disables Lock of Legacy Resources. - Enabled Resources. KS-1130 SERIES USER MANUAL Page: 5-52...

  • Page 159: Advanced >Hardware Monitor

    Displays voltage level of the +VSB5 in supply. VCC5 No changeable options Displays voltage level of the + VCC5 in supply. VCC12 No changeable options Displays voltage level of the + VCC12 in supply. KS-1130 SERIES USER MANUAL Page: 5-53...

  • Page 160: Advanced - F81866 Watchdog

    Enable/ Disable Watch dog timer. WatchDog -Disable Watchdog timer Select seconds or minutes unit -60s Count for Timer Multiple options ranging Sets the desired value (seconds) for (Seconds) from 1 to 255 watchdog timer. KS-1130 SERIES USER MANUAL Page: 5-54...

  • Page 161: Advanced - Cpu Configuration

    - Enabled boot processors with extended CPUID functions. Set disable for WinXP. Intel - Disabled When enabled, a VMM can utilize the Virtualization - Enabled additional hardware capabilities provided Technology by Vanderpool Technology (VT). KS-1130 SERIES USER MANUAL Page: 5-55...
  • Page 162 Displays size of L1 Data Cache L1 Code Cache No changeable options Displays size of L1 Code Cache L2 Cache No changeable options Displays size of L2 Cache. L3 Cache No changeable options Displays size of L3 Cache. KS-1130 SERIES USER MANUAL Page: 5-56...

  • Page 163: Advanced - Ide Configuration

    - Disabled Enable or disable SATA port 0 Device HotPlug HotPlug - Enabled SATA Port 0 - [drive] Displays the drive installed on this SATA port 0. Shows [Empty] if no drive is installed. KS-1130 SERIES USER MANUAL Page: 5-57...

  • Page 164: Advanced - Os Selection

    ASMT109x- Conf (0.1GB) 5.3.2.6 Advanced - OS Selection Menu Path Advanced > OS Selection OS Selection Screen BIOS Setting Options Description/Purpose OS Selection - Windows 8.x Operation System Selection - Android - Windows 7 KS-1130 SERIES USER MANUAL Page: 5-58...

  • Page 165: Advanced - Voltage Adjust Configuration

    - Disabled Selects COM3 Port voltage. - RI -12V COM4 Select - Disabled Selects COM4 Port voltage. - RI -12V Cash drawer - Cash drawer 12V Selects Cash drawer voltage. - Cash drawer 24V KS-1130 SERIES USER MANUAL Page: 5-59...

  • Page 166: Advanced - Csm Configuration

    - Keep Current messages. INT19 Trap - Immediate BIOS reaction on INT19 trapping by Response - Postponed Option ROM.  Immediate: Execute the trap right away.  Postponed: Execute the trap during legacy boot. KS-1130 SERIES USER MANUAL Page: 5-60...
  • Page 167 Video. - Legacy only - Legacy first - UEFI first Other PCI - UEFI first Selects launch method for other PCI devices - Legacy only devices, such as NIC, mass storage or video card. KS-1130 SERIES USER MANUAL Page: 5-61...

  • Page 168: Advanced >Usb Configuration

    USB mass storage device Start Unit time-out command time-out. Device power-up - Auto Maximum time the device will take before delay - Manual it properly reports itself to the Host Controller. “Auto” uses default value: for a KS-1130 SERIES USER MANUAL Page: 5-62...
  • Page 169 Delay range is 1..40 seconds, in one second delay in seconds from 0 to 40 increments Mass Storage - Auto Displays the device name and choose the Devices: - Floppy device emulation type. - Force FDD - Hard Disk - CD-ROM KS-1130 SERIES USER MANUAL Page: 5-63...

  • Page 170: Advanced - Super Io Configuration

    [*Active*] Serial Port 3 Sub-menu Sets Parameters for COM3 [*Active*] Serial Port 4 Sub-menu Sets Parameters for COM4 [*Active*] Parallel Port Sub-menu Sets Parameters for LPT port. [*Active*] PS2 Controller Sub-menu Sets Parameters for PS2. (KB&MS) KS-1130 SERIES USER MANUAL Page: 5-64...
  • Page 171 Possible: - Use Automatic Settings Select IRQ and I/O - IO=3F8h; IRQ=4 DMA resource for Serial - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA Port 1. - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA KS-1130 SERIES USER MANUAL Page: 5-65...
  • Page 172 Serial Port 2. Possible: -Use Automatic Settings Selects IRQ and I/O -IO=2F8h; IRQ=3 DMA resource settings for -IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA Serial Port 2. -IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=2E8h; IRQ=3,4,5,6,7,10,11,12 DMA KS-1130 SERIES USER MANUAL Page: 5-66...
  • Page 173 - IO=3E8h; IRQ=7 DMA resource settings for - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA Serial Port 3. - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12 DMA KS-1130 SERIES USER MANUAL Page: 5-67...
  • Page 174 - IO=2E8h; IRQ=7 DMA resource settings for - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA Serial Port 4. - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12 DMA KS-1130 SERIES USER MANUAL Page: 5-68...
  • Page 175 - ECP Mode Port mode, a bi-directional - ECP and EPP 1.9 Mode mode for printers.  - ECP and EPP 1.7 Mode EPP is Enhanced Parallel Port mode, a high-speed bi-directional mode for KS-1130 SERIES USER MANUAL Page: 5-69...
  • Page 176 Enables or disables the PS2. -Enabled Logical Device No changeable options Displays the current settings Settings of the printer port. Possible: - Use Automatic Settings Selects IRQ and I/O resource -IO=60h; IO=60h; IRQ=1 settings for the printer port. KS-1130 SERIES USER MANUAL Page: 5-70...

  • Page 177: Chipset

    This menu allows users to configure advanced Chipset settings such as North Bridge and South Bridge configuration parameters. Chipset Screen BIOS Setting Options Description/Purpose North Bridge Sub-menu Sets Parameter for (North Bridge) configuration. South Bridge Sub-menu Sets Parameter for (South Bridge) configuration. KS-1130 SERIES USER MANUAL Page: 5-71...

  • Page 178: Chipset - North Bridge

    North Bridge Screen BIOS Setting Options Description/Purpose Intel IGD Sub-menu Configures Graphic Settings. Configuration Memory No changeable options Displays the DRAM information on Information platform. Total Memory No changeable options Displays the DRAM size KS-1130 SERIES USER MANUAL Page: 5-72...
  • Page 179 Enables or disables GFX Boost - Enabled accelerated graphics processing DVMT - 32M Selects DVMT 5.0 Pre-Allocated Pre-Allocated - 64M (Fixed) Graphics Memory size used by - 96M the Internal Graphics Device. - 128M - 256M - 512M KS-1130 SERIES USER MANUAL Page: 5-73...

  • Page 180: Chipset - South Bridge

     Power Off keeps power off till the power button is - Last State pressed.  Power On makes system power on after system restores AC power to the board.  Last State brings system back to the last power state before AC remove. KS-1130 SERIES USER MANUAL Page: 5-74...
  • Page 181 Enables or Disables USB port 1. - Enabled USB Port 2 - Disabled Enables or Disables USB port 2. - Enabled USB Port 3 - Disabled Enables or Disables USB port 3. - Enabled KS-1130 SERIES USER MANUAL Page: 5-75...
  • Page 182 Selects PCI Express port 2 Speed - Gen1 - Gen2 PCI Express Port - Disabled Enables or Disables PCI Express port 3 3(For RTL8111) - Enabled speed - Auto Selects PCI Express port 3 Speed. - Gen1 - Gen2 KS-1130 SERIES USER MANUAL Page: 5-76...

  • Page 183: Security

    BIOS Setting Options Description/Purpose Administrator Password can be 3-20 Specifies the administrator password. Password alphanumeric characters. User Password Password can be 3-20 Specifies the user password. alphanumeric characters. HDD Security Sub-menu Sets HDD password. Configuration: KS-1130 SERIES USER MANUAL Page: 5-77...

  • Page 184: Boot

    Enables/Disables Quiet Boot Options - Enabled Boot Option - [Drive(s)] Allows setting boot option listed in Hard #1~#n - Disabled Drive BBS Priorities. Hard Drive BBS Sub-Menu Allows users to select boot order of Priorities available drive(s) KS-1130 SERIES USER MANUAL Page: 5-78...

  • Page 185: Boot - Hard Drive Bbs Priorities

    Select Hard Drive BBS Priorities from the Boot menu to configure the boot sequence and priority of the available drives. Hard Drive BBS Priorities Screen BIOS Setting Options Description/Purpose Boot Option #1 - - [Drive(s)] Changes the boot order of available - Disabled drive(s). KS-1130 SERIES USER MANUAL Page: 5-79...

  • Page 186: Save & Exit

    Discard Changes and Reset to discard any changes you have made and restore the factory BIOS defaults. Load User Defaults You may simply press F3 at any time to load the Optimized Values which resets all BIOS settings to the factory defaults. Save & Exit Screen KS-1130 SERIES USER MANUAL Page: 5-80...
  • Page 187 No changeable options Resets without saving any changes made in and Reset BIOS settings. Restore Defaults No changeable options Loads the optimized defaults for BIOS settings. Boot Override - [Drive(s)] Forces to boot from selected [drive(s)]. KS-1130 SERIES USER MANUAL Page: 5-81...

  • Page 188: Appendix A System Diagrams

    This appendix includes the exploded diagrams of the system and the parts list as well as the part numbers of the KS-1130 system. • KS-1130 Front Door Assembly Exploded Diagram • KS-1130 Back Case Exploded Diagram • KS-1130 Free Stand Assembly Exploded Diagram •...

  • Page 189: Ks-1130 Front Door Assembly Exploded Diagram

    Appendix A System Diagrams KS-1130 Front Door Assembly Exploded Diagram 27 37 Component Name P/N No. Q’ty 32-inch Touch KS-1130 Web Cam Lens (Transparent) 30-021-10130410 KS-1130 Front Door (w/Paint)(White) 20-147-02061410 KS-1130 Web Cam Cover 20-104-03007410 KS-1130 Panel Holder (w/Paint)(White) 20-129-03002410 32”...
  • Page 190 KS-1130 MS 732 Locking Plate 20-125-02002410 KS-1130 Lift and Turn Compression 80-027-35001410 Latch KS-1130 Printer Door Base LS 20-147-02002410 KS-1130 F PR Cover TP808 LS (w/Paint) 20-104-03063410 (White) KS-1130 F PR Cover TP808 (w/Paint) 20-104-03062410 (White) KS-1130 Speaker 4W Bracket (w/Paint)

  • Page 191: Ks-1130 Back Case Assembly Exploded Diagram

    Appendix A System Diagrams KS-1130 Back Case Assembly Exploded Diagram 26 27 21 20 22 Component Name P/N No. Q’ty KS-1130 Back Case P(w/Paint)(Black) 20-101-02061410 Hole Plug (Φ6.6mm)(Black) 90-067-01100000 KS-1130 6CM Fan Guard 20-044-29011410 KS-1130 System Fan (60x60x20.5mm) 21-004-06060085 5...
  • Page 192 P/N No. Q’ty PK-7090 Concealed Hinge 80-012-30001284 Hex Head With Spring Washer Screw #3 22-251-60012011 1 / M6x1.0Px12mm KS-1130 Back Case Top Sponge 30-013-15100410 Power sub assembly PA-8025 Box PC KS-1130 PA-8025 Wall Mount 20-138-03061410 0 (w/Paint)(Black) Round Head With Spring Washer Screw 22-232-30060211 1 M3x0.5Px6mm...

  • Page 193: Ks-1130 Free Stand Assembly Exploded Diagram

    Appendix A System Diagrams KS-1130 Free Stand Assembly Exploded Diagram Page: A-6 KS-1130 SERIES USER MANUAL...
  • Page 194 22-272-40004911 Hex Head With Spring Washer Screw #3 22-252-60020011 1 / M6x1.0Px20mm KS- 130 Base Tube 20-132-07002411 KS-1130 Ba se Pl ate 20-132-07001411 Flat Head Screw #3 / M8x1.25Px25mm 22-212-80025041 Back case assembly Front door assembly KS-1130 SERIES USER MANUAL...

  • Page 195: Ks-1130 Power Supply Assembly Exploded Diagram

    Appendix A System Diagrams KS-1130 Power Supply Assembly Exploded Diagram Component Name P/N No. Q’ty KS-1130 Power RSP 200 Bracket 20-106-03007410 Power supply-1 KS-1130 Power RP Bracket 20-106-03006410 KS-1130 Mylar Power RP-21009FV 90-056-31100410 (199x99x0.35mm) Power supply-2 KS-1130 Power Cover 20-104-03006410...

  • Page 196: Ks-1130 Thermal Printer Assembly Exploded Diagram

    Appendix A System Diagrams KS-1130 Thermal Printer Assembly Exploded Diagram Component Name P/N No. Q’ty Desktop 2" POS Printer, TP808(Black) 52-701-00026012 KS-1130 Printer TP808 Bracket 20-106-03008410 (w/Paint)(Black Pan Head Screw T3.0x8mm(Black) 22-122-30080011 KS-1130 SERIES USER MANUAL Page: A-9...

  • Page 197: Appendix B Technical Summary

    Appendix B Technical Summary This appendix will give you a brief introduction of the allocation maps for KS-1130 resources. The following topics are included: • KS-1130 High-End Level and Entry Level System Block Diagrams • Interrupt Map • I/O Map •...

  • Page 198: Technical Summary For High-End Level System

    Appendix B Technical Summary Technical Summary for High-End Level System KS-1130 System Block Diagram Audio USB 0 HPRT TP808 Line-Out Face Camera Audio in USB 1 Power Line UMJTW LVDS out USB 2 Data Line (USB3.0) Honeywell Inverter CM3680 (Backlight)

  • Page 199: Interrupt Map

    IRQ 99 Microsoft ACPI-Compliant System IRQ 100 Microsoft ACPI-Compliant System IRQ 101 Microsoft ACPI-Compliant System IRQ 102 Microsoft ACPI-Compliant System IRQ 103 Microsoft ACPI-Compliant System IRQ 104 Microsoft ACPI-Compliant System IRQ 105 Microsoft ACPI-Compliant System Page: B-3 KS-1130 SERIES USER MANUAL...
  • Page 200 IRQ 142 Microsoft ACPI-Compliant System IRQ 143 Microsoft ACPI-Compliant System IRQ 144 Microsoft ACPI-Compliant System IRQ 145 Microsoft ACPI-Compliant System IRQ 146 Microsoft ACPI-Compliant System IRQ 147 Microsoft ACPI-Compliant System IRQ 148 Microsoft ACPI-Compliant System Page: B-4 KS-1130 SERIES USER MANUAL...
  • Page 201 Microsoft ACPI-Compliant System IRQ 186 Microsoft ACPI-Compliant System IRQ 187 Microsoft ACPI-Compliant System IRQ 188 Microsoft ACPI-Compliant System IRQ 189 Microsoft ACPI-Compliant System IRQ 190 Microsoft ACPI-Compliant System IRQ 4294967294 Intel(R) Ethernet Connection (2) I219-V Page: B-5 KS-1130 SERIES USER MANUAL...
  • Page 202 Intel(R) USB 3.0 eXtensible Host Controller IRQ 4294967293 Intel(R) HD Graphics 510 IRQ 4294967291 Intel(R) Management Engine Interface Note: These resource information were gathered using Windows 7 (the IRQ could be assigned differently depending on OS). Page: B-6 KS-1130 SERIES USER MANUAL...

  • Page 203: I/O Map

    Motherboard resources 0x0000FFFF-0x0000FFFF Motherboard resources 0x00001800-0x000018FE Motherboard resources 0x0000164E-0x0000164F Motherboard resources 0x0000FF00-0x0000FFFE Motherboard resources 0x00000800-0x0000087F Motherboard resources 0x00001854-0x00001857 Motherboard resources 0x000000F0-0x000000F0 Numeric data processor 0x0000F000-0x0000F03F Intel(R) HD Graphics 510 0x000003B0-0x000003BB Intel(R) HD Graphics 510 Page: B-7 KS-1130 SERIES USER MANUAL...
  • Page 204 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer Page: B-8 KS-1130 SERIES USER MANUAL...

  • Page 205: Memory Map

    Intel(R) Ethernet Connection I219-V 0xDF030000-0xDF03FFFF Intel(R) USB 3.0 eXtensible Host Controller 0xFDAD0000-0xFDADFFFF Motherboard resources 0xFDB00000-0xFDFFFFFF Motherboard resources 0xFE000000-0xFE01FFFF Motherboard resources 0xFE036000-0xFE03BFFF Motherboard resources 0xFE03D000-0xFE3FFFFF Motherboard resources 0xFE410000-0xFE7FFFFF Motherboard resources 0xDE000000-0xDEFFFFFF Intel(R) HD Graphics 510 Page: B-9 KS-1130 SERIES USER MANUAL...
  • Page 206 Appendix B Technical Summary MEMORY MAP ASSIGNMENT 0xC0000000-0xCFFFFFFF Intel(R) HD Graphics 510 0xDF04E000-0xDF04EFFF Intel(R) 100 Series/C230 Series Chipset Family Thermal subsystem - A131 0xFE40F000-0xFE40FFFF Intel(R) Management Engine Interface Page: B-10 KS-1130 SERIES USER MANUAL...

  • Page 207: Configuring Watchdog Timer

    To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. Page: B-11 KS-1130 SERIES USER MANUAL...
  • Page 208 ;-------------------------- Set second as counting unit -------------------------------------- 0F5h dx, al dx, al ; ---------------- Set timeout interval as 30seconds and start counting -------------- 0F6h dx, al dx, al ;---------------------------------Exit the extended function mode ------------------------- 0AAh dx, al Page: B-12 KS-1130 SERIES USER MANUAL...

  • Page 209: Flash Bios Update

    (3) The System will go into the BIOS setup menu. (4) Select [Boot] menu and enter into [CSM Configuration] menu. (5) Set [Boot option filter] to [UEFI Only] and press <F4> key to save the configuration and restart the system. Page: B-13 KS-1130 SERIES USER MANUAL...
  • Page 210 /?” to view the definition of each control option. The recommended options for BIOS ROM update include the following parameters: Program main BIOS image. /B: Program Boot Block. /N: Program NVRAM. /X: Don’t check ROM ID. Page: B-14 KS-1130 SERIES USER MANUAL...
  • Page 211 Verifying Boot Block ..done Erasing Main Block ..done Updating Main Block ..done Verifying Main Block ..done Erasing NVRAM Block ..done Updating NVRAM Block ..done Verifying NVRAM Block ..done fs0:\afuefix64> _ Page: B-15 KS-1130 SERIES USER MANUAL...
  • Page 212 Restart the system and boot up with the new BIOS configurations. The BIOS Update is completed after the system is restarted. Reboot the system and verify if the BIOS version shown on the initialization screen has been updated. Page: B-16 KS-1130 SERIES USER MANUAL...

  • Page 213: Technical Summary For Entry Level System

    Appendix B Technical Summary Technical Summary for Entry Level System KS-1130 System Block Diagram Audio HPRT TP808 USB 1 Line-Out Audio in Touch USB 2 Face Camera LVDS out USB 4 UMJTW USB 3 Inverter USB 5 Honeywell (Backlight) CM3680...

  • Page 214: Interrupt Map

    IRQ 94 Microsoft ACPI-Compliant System IRQ 95 Microsoft ACPI-Compliant System IRQ 96 Microsoft ACPI-Compliant System IRQ 97 Microsoft ACPI-Compliant System IRQ 98 Microsoft ACPI-Compliant System IRQ 99 Microsoft ACPI-Compliant System IRQ 100 Microsoft ACPI-Compliant System Page: B-18 KS-1130 SERIES USER MANUAL...
  • Page 215 IRQ 137 Microsoft ACPI-Compliant System IRQ 138 Microsoft ACPI-Compliant System IRQ 139 Microsoft ACPI-Compliant System IRQ 140 Microsoft ACPI-Compliant System IRQ 141 Microsoft ACPI-Compliant System IRQ 142 Microsoft ACPI-Compliant System IRQ 143 Microsoft ACPI-Compliant System Page: B-19 KS-1130 SERIES USER MANUAL...
  • Page 216 IRQ 180 Microsoft ACPI-Compliant System IRQ 181 Microsoft ACPI-Compliant System IRQ 182 Microsoft ACPI-Compliant System IRQ 183 Microsoft ACPI-Compliant System IRQ 184 Microsoft ACPI-Compliant System IRQ 185 Microsoft ACPI-Compliant System IRQ 186 Microsoft ACPI-Compliant System Page: B-20 KS-1130 SERIES USER MANUAL...
  • Page 217 IRQ 287 Microsoft ACPI-Compliant System IRQ 288 Microsoft ACPI-Compliant System IRQ 289 Microsoft ACPI-Compliant System IRQ 290 Microsoft ACPI-Compliant System IRQ 291 Microsoft ACPI-Compliant System IRQ 292 Microsoft ACPI-Compliant System IRQ 293 Microsoft ACPI-Compliant System Page: B-21 KS-1130 SERIES USER MANUAL...
  • Page 218 IRQ 330 Microsoft ACPI-Compliant System IRQ 331 Microsoft ACPI-Compliant System IRQ 332 Microsoft ACPI-Compliant System IRQ 333 Microsoft ACPI-Compliant System IRQ 334 Microsoft ACPI-Compliant System IRQ 335 Microsoft ACPI-Compliant System IRQ 336 Microsoft ACPI-Compliant System Page: B-22 KS-1130 SERIES USER MANUAL...
  • Page 219 IRQ 373 Microsoft ACPI-Compliant System IRQ 374 Microsoft ACPI-Compliant System IRQ 375 Microsoft ACPI-Compliant System IRQ 376 Microsoft ACPI-Compliant System IRQ 377 Microsoft ACPI-Compliant System IRQ 378 Microsoft ACPI-Compliant System IRQ 379 Microsoft ACPI-Compliant System Page: B-23 KS-1130 SERIES USER MANUAL...
  • Page 220 IRQ 416 Microsoft ACPI-Compliant System IRQ 417 Microsoft ACPI-Compliant System IRQ 418 Microsoft ACPI-Compliant System IRQ 419 Microsoft ACPI-Compliant System IRQ 420 Microsoft ACPI-Compliant System IRQ 421 Microsoft ACPI-Compliant System IRQ 422 Microsoft ACPI-Compliant System Page: B-24 KS-1130 SERIES USER MANUAL...
  • Page 221 IRQ 459 Microsoft ACPI-Compliant System IRQ 460 Microsoft ACPI-Compliant System IRQ 461 Microsoft ACPI-Compliant System IRQ 462 Microsoft ACPI-Compliant System IRQ 463 Microsoft ACPI-Compliant System IRQ 464 Microsoft ACPI-Compliant System IRQ 465 Microsoft ACPI-Compliant System Page: B-25 KS-1130 SERIES USER MANUAL...
  • Page 222 IRQ 502 Microsoft ACPI-Compliant System IRQ 503 Microsoft ACPI-Compliant System IRQ 504 Microsoft ACPI-Compliant System IRQ 505 Microsoft ACPI-Compliant System IRQ 506 Microsoft ACPI-Compliant System IRQ 507 Microsoft ACPI-Compliant System IRQ 508 Microsoft ACPI-Compliant System Page: B-26 KS-1130 SERIES USER MANUAL...
  • Page 223 Intel(R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft) IRQ 4294967293 Intel(R) Trusted Execution Engine Interface IRQ 4294967294 Realtek PCIe GBE Family Controller Note: These resource information were gathered using Windows 10 (the IRQ could be assigned differently depending on OS). Page: B-27 KS-1130 SERIES USER MANUAL...

  • Page 224: I/O Map

    Programmable interrupt controller 0x000002E8-0x000002EF Communications Port (COM4) 0x000002F8-0x000002FF Communications Port (COM2) 0x00000378-0x0000037F Printer Port (LPT1) 0x000003B0-0x000003BB Intel(R) HD Graphics 0x000003C0-0x000003DF Intel(R) HD Graphics 0x000003E8-0x000003EF Communications Port (COM3) 0x000003F8-0x000003FF Communications Port (COM1) 0x00000400-0x0000047F Motherboard resources Page: B-28 KS-1130 SERIES USER MANUAL...

  • Page 225: Memory Map

    PCI Express Root Complex 0xE0000-0xFFFFF PCI Express Root Complex 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000500-0x000005FE Motherboard resources 0x00000600-0x0000061F Motherboard resources 0x00000680-0x0000069F Motherboard resources 0x00000A00-0x00000A0F Motherboard resources 0x00000A10-0x00000A1F Motherboard resources 0x00000A20-0x00000A2F Motherboard resources 0x00000D00-0x0000FFFF PCI Express Root Complex Page: B-29 KS-1130 SERIES USER MANUAL...
  • Page 226 Intel(R) Pentium(R) processor N- and J-series / Intel(R) Celeron(R) processor N- and J-series AHCI - 0F23 0x0000F070-0x0000F077 Intel(R) Pentium(R) processor N- and J-series / Intel(R) Celeron(R) processor N- and J-series AHCI - 0F23 0x0000F080-0x0000F087 Intel(R) HD Graphics Page: B-30 KS-1130 SERIES USER MANUAL...

  • Page 227: Configuring Watchdog Timer

    To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. Page: B-31 KS-1130 SERIES USER MANUAL...
  • Page 228 ; -------------------------- Set timeout interval as 30 seconds ----------------------------- 0F6h ;------------------------------- Enable Watch PME-------------------------------------------- 0FAh ;------------------- Set second as counting unit and start counting -------------------- 0F5h 0F7h ;---------------------------- Exit the extended function mode ------------------------------ 0AAh Page: B-32 KS-1130 SERIES USER MANUAL...

  • Page 229: Flash Bios Update

    (4) Select [Boot] menu. (5) Select [Hard Drive BBS Priorities], and set the USB bootable device as the 1 boot device. (6) Press <F4> key to save the configuration and exit the BIOS setup menu. Page: B-33 KS-1130 SERIES USER MANUAL...
  • Page 230 ?” to view the definition of each control option. The recommended options for BIOS ROM update include the following parameters: Program main BIOS image. /B: Program Boot Block. /N: Program NVRAM. /X: Don’t check ROM ID. Page: B-34 KS-1130 SERIES USER MANUAL...
  • Page 231 Restart the system and boot up with the new BIOS configurations. The BIOS Update is completed after the system is restarted. Reboot the system and verify if the BIOS version shown on the initialization screen has been updated. Page: B-35 KS-1130 SERIES USER MANUAL...
  • Page 232 Appendix B Technical Summary Page: B-36 KS-1130 SERIES USER MANUAL...

Table of Contents