Installation Options
The 2818A is shipped with four plastic feet mounted to the bottom cover. When it is placed on a
bench or table, the feet support the instrument.
For rack mounting of the 2818A use rack mount kit, P/N 1830-910 (single unit) or 1830-911
(dual unit).
Typical Equipment List
The following equipment is required to perform automated DUT calibrations with the 2818A:
•
AE-TEGAM 2818A, RF Power Transfer Standard
•
Computer with PS-Cal software
•
VNA
1
(PS-Cal compatible)
•
RF Signal Generator (PS-Cal compatible)
•
DUT Power Meter (If required)
If laboratory is including reflection (S11) measurements with DUT calibrations.
1
2818A-900 Revision AB
RF Power Transfer Standard
7