Table of Contents
Advertisement
17:00.0 Ethernet controller: Mellanox Technologies MT43244 BlueField-3 integrated ConnectX-7 network controller (rev 01)
17:00.1 Ethernet controller: Mellanox Technologies MT43244 BlueField-3 integrated ConnectX-7 network controller (rev 01)
17:00.2 DMA controller: Mellanox Technologies MT43244 BlueField-3 SoC Management Interface (rev 01)
3. If an older DOCA software version is installed on your host, make sure to uninstall it before proceeding with the installation of the new version:
o
For Ubuntu/Debian:
$
for
f in $( dpkg --list | grep doca | awk
$ sudo apt-get autoremove
o
For CentOS/RHEL/Rocky:
host#
for
f in $(rpm -qa |grep -i doca ) ;
host# yum autoremove
host# yum makecache
4. Download and install the latest "DOCA for Host" package compatible with your specific operating system and version listed
Drivers" tab.
Make sure to accept cookies from the website when prompted.
At this stage the host environment is all set and you can now perform administrative tasks on the DPU.
2.2 Connecting to BlueField and Verifying Version
To connect to your DPU:
1. SSH to the DPU using the OOB IP or the RShim IP (192.168.100.2) using the default credentials (ubuntu/ubuntu).
2. When logging into the DPU for the first time after installing the BFB, you must change the default password.
NVIDIA BlueField-3 DPU User Guide
'{print $2}'
);
do
echo $f ; apt remove --purge $f -y ; done
do
yum -y remove $f; done
here
under the "BlueField
| 18
Advertisement
Table of Contents
