Table of Contents
Advertisement
Quick Links
®
Technaxx
* User Manual
IP-Security Camera 180° TX-108
Important Hint regarding the User Manuals:
All languages of the user manual are on the CD enclosed. The
English and German version is also as printed version enclosed.
Introduction
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive RED 2014/53/EU. The
Declaration of Conformity you find here: www.technaxx.de/ (in bar at the
bottom "Konformitätserklärung"). Before using the device the first time, read
the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. When working at
higher altitudes, there is danger of falling! Therefore, use suitable safeguards.
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product * Share your experience and opinion on one of the
well-known internet portals.
1
Advertisement
Table of Contents
Related Manuals for Technaxx TX-108
Summary of Contents for Technaxx TX-108
-
Page 1: Introduction
Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully. -
Page 2: Table Of Contents
Cleaning: Protect device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany... -
Page 3: Features
1. Features Huge panorama viewing angle (180° horizontal & 90° vertical) HD video resolution 1280 x 720 with 12fps Brilliant 1/4" CMOS colour sensor (1MP) Motion detection up to ~10m with automatically recording 4x IR LED up to ~10m for optimal night vision ... - Page 4 RESET Button: Using a paper clip to press the reset button for 5 seconds to reset the device. 1 MicroSD(HC/XC) card slot 2 Indicator light (green) 3 Microphone 4 Lens 5 IR LED 6 Speaker 7 Mounting holes hidden under cap 8 MicroSD(HC/XC) card slot 9 Ventilation holes 10 MicroUSB power supply (5V/1A)
-
Page 5: Quick Operation Guide
Select the typ of camera for TX-108 it is WiFi camera. For the WiFi configuration of the TX-108 follow the shown steps in the App. After finishing the configuration the device is connected to your WiFi router and is ready to use. -
Page 6: How To Start (Login/Registration)
App pictures of chapter 4, 5 and 6 are based on Security Premium for iOS and Android in version 3.0.3. 4. How to start (Login/Registration) 4.1 Local mode & Users mode There are Local mode and User mode on the App. Users without a registered account can click “Local”... -
Page 7: Forget Password
Android: Click “+” on top right Choose WiFi camera Confirm if the indicator corner from the four device light TX-108 TX-108. groups. flashing or not. iOS WiFi configuration: Press on Choose WiFi Connect with the WLAN Choose the WiFi you beginning IPC…. - Page 8 WiFi connected and go back to Security Premium. Android WiFi configuration: Choose the Device-ID of Be connected with your Skip this step. Just for TX-108 want WiFi and enter your WiFi iOS user. connect by clicking on it. password/key. Note:...
-
Page 9: Add Device When Already Connected To Network
Smartphone. Device ID adding: On the bottom of the TX-108 you will find a sticker with ID number (and bar code). This ID number is the Device ID. Users can add the device by entering ID manually (or scanning the bar code). -
Page 10: Adding Device From The Same Network
TX-108. LAN/network scan adding: By clicking on LAN/network scan the App will search the local network for already configured cameras (TX-108). Choose the Device ID. Fill in a device name, username and password for the camera. The password was customized by you while WiFi configuration. The... -
Page 11: Ip/Ddns Adding
Adding by DDNS: Enter your DDNS domain or the static IP of the router. You maybe need to set a port forwarding for the IP of the TX-108 in your WiFi router. There for check the manual of your router. Fill in the device name,... -
Page 12: How To Navigate Through The App
The password was customized by you while WiFi configuration. The standard username is admin. Click on complete to save the settings. Note: Using DDNS function you need to: Register to a third party provider (e.g. DynDNS, No-IP, etc.) that provides you a DDNS domain OR ... - Page 13 Gesture operation Two fingers touch the screen and move outward to enlarge the image. Two fingers touch the screen and move inward to narrow the image. Single finger double clicks the screen to enlarge or narrow the image. ...
- Page 14 Device Setup Clicking on the symbol (top right corner) in the live view. It opens the Device setup below. This interface can differ a little bit depending on the use of iOS or Android. All options are explained below. The ID number of the device. This item cannot be filled Device ID in.
- Page 15 Select the sensitivity of the motion detection. Motion detection Depending on the circumstances, a different attitude sensitivity may be the best. Motion detection Enable this function to here a siren sound from the alarm TX-108 with every detected motion. Time Enable/disable continuous recording. Note: Recording video schedule needs to be configured.
-
Page 16: Playback
6.1.2 Playback: Click the button of remote playback in the live view. Precondition of TX-108 remote playback: Make sure the camera time is already time synchronized with the App Insert the suitable MicroSD card into the camera. Setup recording schedule and enable time video OR (not necessary to setup recording schedule and) enable motion detection recording. -
Page 17: My Center (Personal Area)
6.2 My center (personal area) On this interface users can setup their account and App settings. See the picture above. Add email address, cellphone number or WeChat account to bind and be able to login with. Change the password of your account. Like shown in the picture below. -
Page 18: How To Use Pc Software Windows (& Mac)
7.1 Installation Start the Security Premium.exe which you find on the included CD. Or download the file under www.technaxx.de/support . Double click on the Security Premium.exe to start the installation. Choose the language and click on OK. -
Page 19: Login And Add Device
Now start with choosing the look of the software, classic or modern theme. (It can be changed in the software afterwards, if you do not like the chosen theme.) Best is to use the setup guide, click on Next page. But you can also choose the One-Key-Configuration. -
Page 21: Open Live View
7.3 Open live view To open the live view choose the Live view menu. Select the camera you want to view from the list on the right and double click on the device. The live view will open in the black window which is marked with a red frame. 7.4 Playback recordings Click on playback and to open it. -
Page 22: Faqs
8. FAQs Q1: When adding device by LAN or serial number, it warns “device is not online” or “device is not registered” A1: Make sure the internet connection which the device is using could access to internet normally. Check if the router has opened the DHCP function. If you have changed the network parameters of the device manually, we suggest to press RESET button for 5 seconds and make the device to restore to factory settings. -
Page 23: Technical Specifications
(07-2018) Weight / Dimension: 150g / (H) 12 x (Top Ø) 4.5 x (Bottom Ø) 7.6cm Package contents: IP-Security Camera 180° TX-108, 1x USB power adapter 5V/1A, 1x USB-to-Micro-USB power cable, 2x Screws & Dowels, 1x CD, User Manual (english & german) - Page 24 GPL v2 without charge except for the cost of media, shipping, and handling, upon written request to Technaxx GmbH & Co. KG, Kruppstraße 105, 60388 Frankfurt am Main, Germany.
- Page 25 For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
- Page 26 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
- Page 27 machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.
- Page 28 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
- Page 29 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;...
- Page 30 (2) To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the program's name and an idea of what it does.>...