Table of Contents
Advertisement
Quick Links
WiFi IP Outdoor Camera TX-145 &
Additional camera for TX-128 Set
Introduction
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive RED 2014/53/EU. The
Declaration of Conformity you find here: www.technaxx.de/ (in bar at the
bottom "Konformitätserklärung"). Before using the device the first time, read
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
The support hotline is available Mon-Fri from 9 am to 1 pm & 2 pm to 5 pm
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. When working at
higher altitudes, there is danger of falling! Therefore, use suitable safeguards.
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Enjoy your product * Share your experience and opinion on one of the
®
Technaxx
the user manual carefully.
Free Email: support@technaxx.de
well-known internet portals.
Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old devices
or batteries into the domestic waste. Cleaning: Protect the
device from contamination and pollution (use a clean drapery).
Avoid
using
solvents/aggressive
accurately. Distributor: Technaxx Deutschland GmbH &
Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany
* User Manual
rough,
coarse-grained
cleaner.
Wipe
1
Warranty 2 years
materials
the
cleaned
device
or
Advertisement
Table of Contents
Related Manuals for Technaxx TX-145
Summary of Contents for Technaxx TX-145
-
Page 1: Introduction
Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully. -
Page 2: Table Of Contents
Contents Introduction ....................1 1. Features ....................3 2. Product overview ..................3 3. Quick operation guide ................5 3.1 For STANDALONE USE ..............5 3.2 Use as ADDITIONAL CAMERA for TX-128 Set ........ 6 4. How to start (Login/Registration) ..............7 4.1 Local mode &... -
Page 3: Features
1. Features ⚫ Use as additional camera for TX-128 or stand-alone camera ⚫ Viewing angle 90° horizontal & 55° vertical ⚫ FullHD video resolution 1920 x 1080 with max. 15fps ⚫ Brilliant 1/ 2.9" CMOS colour sensor (2MP) ⚫ Motion detection up to ~8m (PIR 120°) ⚫3 IR LED up to ~15m for optimal night vision ⚫... - Page 4 1 Antenna 7 PIR sensor 2 Housing metal (IP66) 8 Vandal-Proof Housing 3 IR LED’s 9 Built in Speaker MicroSD(HC/XC) card slot Lens (under the cover) 5 Light sensor 10 Adjustable Holder / Feet 6 Microphone 11 Mounting holes Cable connections: DC power input (12V/1A) Reset button (under the cover) LAN connection...
-
Page 5: Quick Operation Guide
→ Select the type of camera for TX-145 it is WiFi camera. → For the WiFi configuration of the TX-145 follow the shown steps in the App. Important: The indicator light to show the current status is find at the LAN connection. -
Page 6: Use As Additional Camera For Tx-128 Set
3.2 Use as ADDITIONAL CAMERA for TX-128 Set The first camera has been matched with monitor in the factory already. The image shows up when the kit is powered on. If users need to pair the camera again or add an additional camera, operate as below: Step one: Power on the monitor and camera. -
Page 7: How To Start (Login/Registration)
App pictures of chapter 4, 5 and 6 are based on Security Premium for iOS and Android in version 3.3.6 and 3.3.7. 4. How to start (Login/Registration) 4.1 Local mode & Users mode There are Local mode and User mode on the App. Users without a registered account can click “Local”... -
Page 8: Forget Password
4.3 Forget Password If you forget the password and needs to get it back, click „Forget password”. Enter the Email address into the user interface and press Confirm. The system sends a confirmation Email, which the user can check via his Email account). -
Page 9: How To Add A Device
For WiFi configuration this camera uses the Access Point (Hotspot) method. iOS and Android: Click “+” on top right Choose WiFi camera The TX-145 does not corner from the device groups. have any indicator light. TX-145. - Page 10 iOS WiFi configuration: Go to your WiFi settings Connect with the WLAN Choose the WiFi you of your Smartphone and beginning IPC…. The want to connect with open it. WiFi password/key is enter WiFi 11111111 (8x1), wait password /key. until IPC….
- Page 11 Android WiFi configuration: Choose the Device-ID of Be connected with your Skip this step. Just for TX-145 want WiFi and enter your WiFi iOS user. connect. password/key. Note: WiFi configuration does not work when you are connected to your mobile...
-
Page 12: Add Device When Already Connected To Network
WiFi connection configuring WiFi password successful and you can connection. TX-145. You are not name the device. allowed to use number series like e.g. “123” or the words “none” or “admin”. 5.2 Add device when already connected to network This mode is to add the device which is already configured and connected to a network. -
Page 13: Adding Device From The Same Network
Device ID adding: On the bottom of the TX-145 you will find a sticker with ID number (and bar code). This ID number is the Device ID. Users can add the device by entering ID manually (or scanning the bar code). -
Page 14: Ip/Ddns Adding
5.4 IP/DDNS adding By clicking on networked devices (1) the ADD by device ID will open. Here you can click on other adding way (2). Now it is possible to add the TX-145 by IP or DDNS (3). (1) Add device... - Page 15 Adding by DDNS: Enter your DDNS domain or the static IP of the router. You maybe need to set a port forwarding for the IP of the TX-145 in your WiFi router. There for check the manual of your router. Fill in the device name, username and password for the camera.
-
Page 16: How To Navigate Through The App
6. How to navigate through the App 6.1 My device In the Device Interface you can see all your added devices. After clicking on the three dots next to the status (online, connecting, offline) you can set the device to the top, show manually taken Screenshot/Recordings, Edit or Delete the camera. - Page 17 Gesture operation ⚫ Two fingers touch the screen and move outward to enlarge the image. ⚫ Two fingers touch the screen and move inward to narrow the image. ⚫ Single finger double clicks the screen to enlarge or narrow the image. ⚫...
- Page 18 Calendar Choose the date you want to see the playback Zoom Click it to zoom in and out on the timeline Device Setup Clicking on Setup or Setting under the live view. It opens the Device setup below. This interface can differ a little bit depending on the use of iOS or Android. All options are explained below.
- Page 19 MicroSD card. detection - Motion detection alarm/notifications: Enable/disable management this function to get push notifications from the TX-145 with every detected motion. - Motion detection sensitivity: Select the sensitivity of the motion detection. Depending on the circumstances, a different attitude may be the best.
- Page 20 Click and check if there is new software version. If there is, click and update directly to achieve OTA upgrade of the Firmware device. If the version is already the newest, there will be a update prompt. Below options are listed under Device Storage. - MicroSD card status: Show the status of MicroSD card (normal or abnormal).
-
Page 21: Playback
Click the button of remote playback in the live view. Precondition of TX-145 remote playback: → Make sure the camera time is already time synchronized with the App → Insert the suitable MicroSD card into the camera. → Setup recording schedule and enable time video OR (not necessary to setup recording schedule and) enable motion detection recording. -
Page 22: My Center (Personal Area)
6.2 My center (personal area) On this interface users can setup their account and App settings. See the picture above. Add email address, cellphone number or WeChat account to bind and be able to login with. Change the password of your account. Like shown in the picture below. - Page 23 Setup interface Personal info (account) interface...
-
Page 24: How To Use Pc Software Windows (& Mac)
Premium.exe which find under www.technaxx.de/support --> Security Premium --> TX-145 → Double click on the Security Premium.exe to start the installation. → Choose the language and click on OK. → Agree to license agreement and click on I Agree. → Choose the path the software is installed to or keep the suggestion and click on install. -
Page 25: Login And Add Device
7.2 Login and add device → The PC Software starts automatically. A login window will show up. Just click on Login if you choose Local login in the Setup guide. →→ If you choose Cloud login enter the email address and the password, that you created over the App. -
Page 27: Open Live View
7.3 Open live view To open the live view choose the Live view menu. Select the camera you want to view from the list on the right and double click on the device. The live view will open in the black window which is marked with a red frame. 7.4 Playback recordings Click on playback and to open it. -
Page 28: Faqs
8. FAQs Q1: When adding device by LAN or serial number, it warns “device is not online” or “device is not registered” A1: Make sure the internet connection which the device is using could access to internet normally. Check if the router has opened the DHCP function. If you have changed the network parameters of the device manually, we suggest to press RESET button for 5 seconds and make the device to restore to factory settings. -
Page 29: Technical Specifications
FR, ES, IT, NL, SE, DK, NO, FI, CZ, PO (06-2020) Weight / Dimension: 700g / (L) 20.0 x (W) 8.0 x (H) 6.0cm (+18cm antenna) Package contents: WiFi IP Outdoor Camera TX-145, 1x power adapter 12V/1A, 3x Screws & Dowels, User Manual (short) - Page 30 GPL v2 without charge except for the cost of media, shipping, and handling, upon written request to Technaxx GmbH & Co. KG, Kruppstraße 105, 60388 Frankfurt am Main, Germany.
- Page 31 For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
- Page 32 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
- Page 33 machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.
- Page 34 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
- Page 35 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;...
- Page 36 (2) To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the program's name and an idea of what it does.>...