Setting The Base; Setting The Date/Time - Gigaset A540 IP Manual

Setting the base

Setting the base
The base settings are configured using a registered Gigaset handset.

Setting the date/time

The date and time must be set in order to show the correct time for incoming calls,
for example.
There are two methods of setting the date and time:
u
Your base receives the date and time from a time server on the Internet, provid-
ing that the base is connected to the Internet and synchronisation with a time
server is enabled (default setting;
u
You can also change the date and time manually via the menu on one of the reg-
istered handsets.
Your base accepts the new time and transfers this information to the connected
handsets.
Setting the date and time on the handset
If the date and time have not yet been set on the handset, the
appears.
§Time§
Or:
¤
§Menu§
¤
You can enter data in the following fields:
Enter Date:
Enter day, month and year as an 8-digit number via the keypad e.g.,
14Q12Q11 for 14/01/2011 and press
Enter Time:
Enter the hours and minutes in 4-digit format via the keypad, e.g.,
QM15 for 07:15 am.
¤
Press the display key
104
Press the display key.
¤
Ï Settings
Date/Time
§OK§
to save the settings.
¢
page 137).
§OK§
§Time§
display key
.