Marantz RC9200 User Manual page 50

Reference
or more devices with RF signals, you have to change the Remote Control's RF IR
settings for those devices.
1 Make sure the Device tab is active.The Device tab is active when the name
of a device is displayed at the right side of the touch screen .
2 Tap the Mode button
The Device menu appears.
3 Select the device for which you want to
change the RF IR settings.
The RF IR settings appear. The reversed color label on the
button ndicates that the selected device is currently operated with IR signals.
4 Tap RF.The RF IR settings for the selected device are
changed from IR to RF.
When you have only one RF Extender, you can
accept the default settings for the Extender ID
and the Channel. Continue with step 5.
-or-
When you have several RF Extenders to operate
devices, you have to assign the correct Extender
ID to the selected device. Follow the instructions
as described in "Changing the Extender ID".
Note The ID on the RF Extender has to match the Extender ID on the Remote
Control.
Changing the Extender ID
1 Make sure the EXTENDER button is active.
The button is active when the button label is red.
2 Press the Left and Right Hard buttons to
change the Extender ID. The Remote Control offers 16 Extender ID's.
3 Tap Accept to save the RF IR settings for
the selected device or Tap Cancel to return without changing the
RF IR settings for the selected device.
4 Repeat instructions 1 to 3 for all devices for which you want to change
the RF IR settings.
5 Tap Close.
The Remote Control switches back to Use mode. The Remote Control is
configured to operate the devices you have set with RF signals.
User Guide
48
and select RF IR.