JC LAB J-SCOPE BIMC-A03A-W3 Manual page 20

9.0 HDMI & LAN Connection of JC CAM
9.2.2 Retrieve images via the local area network from a Windows PC on the same
local area network (JCAM Software Only)
(1) Connect a Windows PC or laptop that supports 5G WiFi IEEE802.11ac protocol to the
same local area network as the camera.
(2) Install and run the software JCAM Capture Pro on the Windows PC or laptop.
(3) When there is only one network camera in the local area network, the software can
automatically get the live image from the
camera.
(4) When there are multiple network cameras in the same local area network, click the
icon " " in the upper right corner of JCAM Capture Pro (Figure 1), the list
automatically shows all cameras in the current local area network (Figure 2), select a
camera as needed, support switching midway at any time.
★ Note: When a Windows PC or laptop computer accesses the camera microscope images, it does not
affect the computer's ability to access the Internet, and if that local area network is open to the Internet,
the Windows PC or laptop can also access the Internet.
9.2.3 Retrieve images via the local area network from cell phones and tablets in the same
local area network
(1) Connect the cell phones or tablets that supports 5G WiFi IEEE802.11ac protocol to
the same local area network as the camera.
(2) Install and run the App KoPa WiFi Lab on the cell phones or tablets, enter the
navigation interface and click the "
(3) When there is only one network camera in the local area network, the App can
automatically get the live image from the camera.
" button.
Page 18