JC LAB J-SCOPE BIMC-A03A-W3 Manual page 16

7.0 Connection JC CAM for Windows PC
Wi-Fi Mode
7.6 Please switch the hardware switch of Wi-Fi camera to Wi-Fi working state in
advance
Switch to Wi-Fi work mode
7.7 Connect your computer to the Wi-Fi camera, please confirm that your computer has
a wireless network in advance. Since the default of our camera is 5G Wi-Fi IEE 802.11ac
protocol, please confirm in advance that your computer wireless network supports this
protocol.
7.8 After starting the Wi-Fi camera, search for Wi-Fi name (KoPa5_xxxx) in the network
connection. The default connection password is 12345678
7.9 After Connected to the Wi-Fi, Open the JC Cam software. Select the " " button in
the shortcut toolbar, and then select" WiFi Camera "from the "
selection in the upper right corner of the software. Wait a moment for the PC to connect
to the Wi-Fi camera.
Page 14