Table of Contents
Advertisement
Performing a system test
You can test the system setup in ADVANCED
MENU under SYSTEM TEST option.
1
Press and hold Menu on the Lyric
thermostat for 5 seconds to access
ADVANCED MENU options.
2
Touch
or
3
Touch Select or touch text area.
4
Touch
or
Touch Select or touch text area.
5
For the heat test and cool test, use
to activate each stage of the equipment.
For the fan test, use
on and off.
NOTE: The clock is used as a timer while the
stages are running. The Heat On and Cool On
indicators are displayed when the system test
is running.
Viewing equipment status
You can see the status of thermostat-
controlled equipment in the Menu under the
EQMT STATUS option.
1
Touch Menu on your thermostat.
2
Touch
or
Touch Select or touch text area.
3
Touch
or
equipment the thermostat is controlling.
Depending on what feature the thermostat
supports or how it was installed, the
Equipment Status screen reports data for
the following systems:
• Heating and cooling
• Fan
• Ventilation (available on certain
models only)
to go to SYSTEM TEST.
to select system test type.
or
to turn the fan
to go to EQMT STATUS.
to view statuses of all the
or
Back
17
Back
Select
Heat On
Heat
Done
Select
Back
Select
Done
Advertisement
Table of Contents
