12 SERVICE WORK ON THE CHASSIS
12.8
66
Installing the fork legs
402556-10
V01756-11
402556-10
V01784-11
Main work
(EXC‑F EU, XCF‑W)
–
Position the fork legs.
1
Bleeder screws
Info
The rebound damping is located in right fork
leg REB (red adjusting screw). The compression
damping is located in left fork leg COMP (white
adjusting screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
triple clamp.
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom
triple clamp
(EXC‑F SIX DAYS EU)
–
Position the fork legs.
1
Bleeder screws
Info
The rebound damping is located in right fork
leg REB (red adjusting screw). The compression
damping is located in left fork leg COM (white
adjusting screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
triple clamp.
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom
triple clamp
are positioned toward the front.
M8
20 Nm
(14.8 lbf ft)
M8
15 Nm
(11.1 lbf ft)
are positioned toward the front.
M8
17 Nm
(12.5 lbf ft)
M8
15 Nm
(11.1 lbf ft)