13 BRAKE SYSTEM
13.5
13.6
102
V01771-10
Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
E00342-10
Changing the brake linings of the front brake
Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)
(XCF‑W)
–
Move the brake fluid reservoir mounted on the handlebar to
a horizontal position.
–
1
Remove screws
.
–
2
Take off cover
with membrane
–
Add brake fluid to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten
the screws.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled with water.
–
Check the brake linings for minimum thickness
A
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
(
p. 102)
–
Check the brake linings for damage and cracking.
»
If damage or cracking is visible:
–
Change the brake linings of the front brake.
(
p. 102)
3
.
A
.
5 mm (0.2 in)
p. 164)
A
.
≥ 1 mm (≥ 0.04 in)