12 SERVICE WORK ON THE CHASSIS
12.19
12.20
76
K00576-10
S01321-10
Removing the shock absorber
K01337-10
Installing the shock absorber
K01337-11
(EXC‑F SIX DAYS EU)
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
1
Remove screw
and lower the rear wheel with the link fork
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
2
Remove screw
, push splash protector
remove the shock absorber.
Main work
–
1
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
M12
shock absorber
–
Mount and tighten screw
Guideline
Screw, bottom
M12
shock absorber
1
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
p. 126)
p. 127)
p. 63)
3
to the side, and
to the side and position the shock
2
.
80 Nm (59 lbf ft)
Loctite
®
3
.
80 Nm (59 lbf ft)
Loctite
®
.
2701™
2701™