Pro-Form PFTL39115.3 User Manual page 10

5. Set the console assembly (B) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the two indicated screws
(C). Then, remove the Pulse Crossbar (97).
6. IMPORTANT: To avoid damaging the Pulse
Crossbar (97), do not use power tools and do
not overtighten the M4.2 x 19mm Screws (3).
Orient the Pulse Crossbar (97) as shown.
Attach the Pulse Crossbar to the Left and Right
Handrails (69, 81) with four M4.2 x 19mm
Screws (3) and four M4.2 Star Washers (83);
start all four Screws, and then tighten them.
Then, firmly tighten the two 3/8" x 2 3/4"
Screws (1) and the two 5/16" x 3/4" Screws (4).
5
C
97
6
3
83
1
69
4
10
B
C
97
3
83
1
81
4