Purpose Of This Manual; Precautions; General Characteristics - Electrolux DIVA 60 cm Service Manual

1 Purpose of this manual

The purpose of this Service Manual is to provide Service Engineers, who already have the basic knowledge
necessary to repair household dishwashers, with technical information regarding dishwashers featuring the
EDW1503 electronic control system. These appliances are manufactured at Solaro (Italy).
The EDW1503 control system consists of a main circuit board and a control/display board. Both boards are
housed in a single plastic container.
This system is used in free-standing and partially integrated versions with "DIVA" 60 cm structures.
This Manual describes:

General characteristics

•
Control panel and programmes
•
Technical characteristics
•
Guide to diagnostics
•
For more detailed information regarding the hydraulic circuits and the structural characteristics of the
appliances, refer to the Service Manual for presentation of the "DIVA" structure (publication number 599 35 55–
25).

2 PRECAUTIONS

Electrical appliances must be serviced only by qualified Service Engineers.
Always remove the plug from the power socket before touching internal
components.
3 GENERAL CHARACTERISTICS
Power supply
Total power absorption
Mains water supply
Capacity
Dimensions:
width
-
height
-
depth
-
Controls
ON/OFF
-
Selection of programmes/options
-
Display
-
Washing system
Control of water level
Water heating
Temperature control
Type of drying
Safety devices / Alarms
SOI/DT 2003 - 01 eb
230 V / 50 Hz (limits: 187−254 V)
2300 W
Pressure Min. / Max. 5 − 80 N/cm
12 place settings
59.6 cm
81.8 -87.8 cm
55.5 cm
Horizontal / Vertical
Two-pole switch (separate from the electronic board)
Button-actioned (min. 3, max. 6)
Display 2,5 digits and LEDs
Combined / Pulse
Pressure switch + Software
Tube-enclosed heating element (2100 W)
NTC temperature sensor
Active / Turbo
Total protection (hydraulic + Software
5
2
599 35 64-85