Installing The Coin-Cell Battery - Dell Precision 3561 X2CND Service Manual

Installing the coin-cell battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Steps
1. Adhere the coin-cell battery to the slot on the palm-rest assembly.
2. Connect the coin-cell battery cable to the connector.
Next steps
1. Install the assembly inner
2. Install the battery.
3. Install the WWAN card.
4. Install the WLAN card.
5. Install the 2280 solid-state drive
6. Install the memory module.
7. Install the base cover.
8. Install the microSD card.
9. Install the SIM card.
10. Follow the procedure in
frame.
or 2230 solid-state
After working inside your
drive.
computer.
Removing and installing components 65