Dell Precision 3561 X2CND Service Manual page 104

Table 12. System setup options—Passwords menu
Passwords
Admin Password
System Password
NVMe SSD0
Password Configuration
Upper Case Letter
Lower Case Letter
Digit
Special Character
Minimum Characters
Password Bypass
Password Changes
Enable Non-Admin Password Changes
Admin Setup Lockout
Enable Admin Setup Lockout
Master Password Lockout
Enable Master Password Lockout
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
Table 13. System setup options—Update, Recovery menu
Update, Recovery
UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
104 System setup
Set, change, or delete the administrator password.
Set, change, or delete the computer password.
Set, change, or delete the NVMe SSD0 password.
Reinforces password must have at least one upper case letter.
By default, the option is disabled.
Reinforces password must have at least one lower case letter.
By default, the option is disabled.
Reinforces password must have at least one digit.
By default, the option is disabled.
Reinforces password must have at least one special character.
By default, the option is disabled.
Set the minimum characters allowed for password.
When enabled, this always prompts for computer and internal hard drive
passwords when powered on from the off state.
By default, the Disabled option is enabled.
Enable or disable to change computer and hard drive password without the
need for admin password.
By default, the option is enabled.
Enables administrators control over how their users can or cannot access BIOS
setup.
By default, the option is disabled.
When enabled, this will disable the master password support.
By default, the option is disabled.
Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.
By default, the option is disabled.
Enable or disable BIOS updates through UEFI capsule update packages.
By default, the option is enabled.
Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.
By default, the option is enabled.