Dell Precision 3561 X2CND Service Manual page 105

Table 13. System setup options—Update, Recovery menu (continued)
Update, Recovery
Allow BIOS Downgrade
SupportAssist OS Recovery
BISOConnect
Dell Auto OS Recovery Threshold
Table 14. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Wake on LAN
Wake on LAN
Auto on Time
Intel AMT Capability
MEBx Hotkey
USB Provision
Table 15. System setup options—Keyboard menu
Keyboard
Numlock Enable
Fn Lock Options
Keyboard Illumination
Enable or disable the flashing of the computer firmware to previous revision is
blocked.
By default, the option is enabled.
Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.
By default, the option is enabled.
Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.
By default, the threshold value is set to 2.
Display the Service Tag of the computer.
Create a computer Asset Tag.
Enable or disable the wake on AC option.
By default, the option is disabled.
Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Enable Intel Active Management Technology
Allows the user to use Ctrl+P hotkey to access MEBx
When enabled, Intel AMT can be provisioned using the local provisioning file
through a USB stroage device
Enable or disable the Numlock function when the computer boots.
By default, the option is enabled.
By default, the Fn lock option is enabled.
Enables to change the keyboard illumination settings.
By default, the Bright option is enabled.
System setup 105