Steps
1. Connect the eDP/display cable to the connector on the camera.
2. Adhere the eDP/display cable to the display back cover.
3. Adhere the conductive tape and route the eDP/display cable to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the
base
cover.
7. Install the
microSD
card.
8. Install the
SIM
card.
9. Follow the procedure in
86
Removing and installing components
After working inside your
computer.