Wireless Lan Connection; Precautions When Using The Wireless Adapter; To Install The Daikin Online Controller Application; To Set The Wireless Connection - Daikin FTXA35A2V1BW Operation Manual

Hide thumbs Also See for FTXA35A2V1BW:
Table of Contents

Advertisement

Result: The day of the week and the reservation number are
displayed.
2 Press
or
to select the day of the week to be deleted.
3 Press
.
Result:
,
, and
4 Press
or
and select "blank".
Result: The setting will change as follows:
5 Press
.
Result: The selected reservation is deleted.
6 Press
to exit.
Result: Remaining reservations will be active.
To delete a reservation for each day of the week
Use this function if you want to delete all reservation settings for one
day of the week. This can be used in confirmation or setting mode.
1 Press
or
to select the day of the week to be deleted.
2 Hold
for about 5 seconds.
Result: All reservations for the selected day will be deleted.
To delete all reservations
Use this function if you want to delete all reservations for all days of
the week in one go. This procedure CANNOT be used in the setting
mode.
1 Hold
for about 5 seconds while in the default display.
Result: All reservations will be deleted.
4.11

Wireless LAN connection

The customer is responsible for providing:
▪ Smartphone or tablet with minimum supported version of Android
or iOS, specified on
http://www.onlinecontroller.daikineurope.com
▪ Internet line and communication device, such as a modem, router,
etc.
▪ Wireless LAN access point
▪ Installed free Daikin Online Controller application
Note: If needed, the SSID number and the KEY are located on the
unit or can be found in the accessory bag.
a
Label with SSID number and password
4.11.1
Precautions when using the wireless
adapter
Do NOT use near:
▪ Medical equipment. E.g. persons using cardiac pacemakers or
defibrillators.
This
product
interference.
▪ Auto-control equipment. E.g. automatic doors or fire alarm
equipment. This product may cause faulty behaviour of the
equipment.
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
3P485919-7P – 2019.10
blink.
a
may
cause
electromagnetic
▪ Microwave oven. It may affect wireless LAN communications.
4.11.2
To install the Daikin Online Controller
application
1 Open:
▪ Google Play for appliances using Android.
▪ App Store for appliances using iOS.
2 Search for Daikin Online Controller.
3 Follow the directions on the screen to install.
4.11.3

To set the wireless connection

There are two options to connect the wireless adapter with your
smart device.
▪ Connect the wireless adapter to your smart device directly.
▪ Connect the wireless adapter to your home network. The
wireless adapter will communicate with your smart device in your
home network using a modem, router or a similar device.
For more information and FAQ refer to:
http://www.onlinecontroller.daikineurope.com/.
1 Stop the operation before setting the wireless connection.
2 Use the user interface to choose the wireless adapter setting
menu.
Menu
Description
WPS setting
AP mode
RUN mode (SSID + KEY)
Reset to factory default
Wireless adapter OFF
To connect the wireless adapter to your device
directly
1 Hold
for at least 5 seconds in the default screen.
Result: The confirmation display (menu  ) appears.
2 Press repeatedly
or
) appears.
3 Press
to confirm the selection.
Result:
is blinking. The operation and timer LEDs are blinking
alternately.
4 Connect your smart device to the access point in the same way
as to a standard wireless network.
5 Enter the SSID number and password located on the unit or in
the accessory set.
6 Press
to exit the menu.
Result: The display will return to the default screen.
4 Operation
until the AP mode display (menu 
Operation manual
11

Advertisement

Table of Contents
loading

Table of Contents