To Start/Stop On Timer Operation; To Combine Off Timer And On Timer; Weekly Timer Operation; To Set Weekly Timer Operation - Daikin FTXA35A2V1BW Operation Manual

2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD.
Result: The timer lamp lights up.
INFORMATION
Each time or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To stop operation, press
Result: and disappear from the LCD and the timer
lamp goes off. and the day of the week are displayed on the LCD.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. The memory will be reset when the user
interface batteries are replaced.
Use of night set mode in combination with OFF timer
The air conditioner automatically adjusts the temperature
setting (0.5°C up in cooling, 2.0°C down in heating) to
prevent excessive cooling/heating
comfortable sleeping temperature.
4.9.2

To start/stop ON timer operation

1 Press to start.
Result: is displayed on the LCD, the timer lamp lights
up, and blinks. and the day of the week disappear from
the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD. The timer
lamp lights up.
INFORMATION
Each time or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To stop operation, press
Result: and disappear from the LCD and the timer
lamp goes off. and the day of the week are displayed on the
LCD.
4.9.3

To combine OFF timer and ON timer

1 To set the timers, refer to
[ 4 8]
operation" and
operation" [ 4 9].
Result: and are displayed on the LCD.
Example:
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
3P485919-7P – 2019.10
is pressed, the time setting
.
and ensure
is pressed, the time setting
.
"4.9.1 To start/stop OFF timer
"4.9.2 To start/stop ON timer
Display Current time
6:00
Note: If the timer setting is active, the current time is NOT displayed
on the LCD.
4.10

Weekly timer operation

With this operation, you can save up to 4 timer settings for each day
of the week.
Example: Create a different setting from Monday to Friday and a
different setting for weekends.
Day of the week
Monday
▪ Make up to 4 settings.
Tuesday~Friday
▪ Use the copy mode if the
settings are the same as
for Monday.
Saturday
a
▪ No timer setting
Sunday
▪ Make up to 4 settings.
▪ ON-ON-ON-ON setting. Enables scheduling the operation mode
and set temperature.
▪ OFF-OFF-OFF-OFF setting.Only the turn off time can be set for
each day.
Note: Be sure to aim the user interface at the indoor unit and check
for a receiving tone when setting the Weekly timer operation.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to
INFORMATION
▪ Weekly timer and ON/OFF timer operation CANNOT be
used at the same time. The ON/OFF timer operation
takes priority. Weekly timer will be in standby,
disappears from the LCD. When the ON/OFF timer is
completed, the Weekly timer becomes active.
▪ The day of the week, ON/OFF timer mode, time and
temperature (only for ON timer) can be set with the
Weekly timer. Other settings are based on previous ON
timer setting.
4.10.1

To set Weekly timer operation

1 Press .
Result: The day of the week and the reservation number of the
current day are displayed.
2 Press or
reservation number.
3 Press .
4 Operation
Set while... Operation
the unit is Stops at 7:00
operating. and starts at
14:00.
the unit is NOT Starts at 14:00.
operating.
Setting example
1 2 3
ON OFF ON
25°C
6:00 8:30 17:30
1 2 3
ON OFF ON
25°C
6:00 8:30 17:30
—
1 2 3
ON OFF OFF
25°C 27°C
8:00 10:00 19:00 21:00
clock" [ 4 4].
"3.3.1 To set the
to select the day of the week and the
Operation manual
4
OFF
27°C
22:00
4
OFF
27°C
22:00
4
ON
27°C
9